globe GE50618 Smart Beacon Strip Light User Manual
- June 8, 2024
- globe
Table of Contents
globe GE50618 Smart Beacon Strip Light
“B” IS FOR BEACON
Unlike Wi-Fi products, your Beacon smart products connect to your phone using
Bluetooth. Here are a couple of tips to help you get the most out of them:
Proximity: Beacon allows for full local control from up to 65 feet (20
meters) away.
Automation: Beacon is great at home automation! Schedules and Timers will
continue to run even when the phone is not within range.
Group Control: Group your products and control them together.
Beacon products can only be grouped with other Beacon products of the same
type.
CONNECTING INSTRUCTIONS
-
Download the Globe SuiteTM app from the iOS or Android store
Create an account and log in. Ensure your mobile device is running iOS 9.0/AndroidTM 4.4 or higher. -
Set your Smart Strip Light in pairing mode Plug in your strip light and power it on. If done correctly, the light should be RED and flashing rapidly – indicating it is in pairing mode. If not, locate the power switch on the product’s controller and turn it: OFF → ON (x3)
-
Connect
Ensure all requested permissions are enabled on your mobile device: Bluetooth, Location Services.
On the app’s home screen, select the in the top-right corner and select “Add a device”. If your strip light is flashing, the app will det ect it within a few seconds. When discovered, select the strip light icon, and select “Next.” -
Setup and enjoy!
Name your strip light and choose which room to place it in. You can now control it directly from the app.
Need help?
Select the “How do I set device into pairing mode” link on the “scan” page and
follow the in-app instructions.
Routines must be created within a 65 feet range of the strip light. When your phone is not in range, they will continue running but cannot be modified.
PRINTING SPECIFICATIONS FOR SKU
CARD DIMENSION
50618 IS
- Designer: SB/DF
- Docket: 11-070-22
- Factory: JBT
CONTROLLING THROUGH THE APP
Please note that the device UI panel is subject to change without any prior notice.
LIGHT MODE / CONTROL
-
Color
16+ million colours -
Mood
Preset colour combinations -
Music sync
Have your light react to sounds -
Brightness
Dimmable 10 – 100% (app control)
HARDWARE SETTINGS
Stay off
If power is cut, your light will stay OFF when reconnected to a power source.
ROUTINES
Timer
Set a countdown for your light to turn ON or OFF once the timer runs out.
Add a new schedule
Set a time and date for your light to either turn ON or OFF to create
additional routines that fit your specific needs.
APP FEATURES
-
Device sharing
Share access to your connected devices with another Globe SuiteTM app user from the same home or account. -
Device grouping
Group multiple same-type Beacon devices together to control them in unison, rather than individually. -
Create a Smart Scene
Automate your light to turn ON or OFF based on factors such as climate, time and other devices’ status.
LIMITED WARRANTY
This strip light is warranted to last 2 years from the date of purchase based on use of 3 hours per day. If it fails before that time, we will replace it. Send Globe Electric the strip light, proof of purchase and register receipt along with your complete name and address. See caution text for proper use. This warranty is void if this product is misused in any way. This replacement is the sole remedy available and liability for incidental or consequential damage is expressly excluded. This device is not intended for use with emergency exit fixtures or emergency exit lights, photocells and electronic timers. Do not use where directly exposed to water.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: Reorient or relocate
the receiving antenna. Increase the separation between the equipment and
receiver. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF EXPOSURE
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This device should be installed and operated with
minimum distance 20cm between the radiator & your body.
USER MANUAL NOTICE FOR LICENSE-EXEMPT RADIO APPARATUS
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
RADIATION EXPOSURE STATEMENT:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body..
FCC RESPONSIBLE PARTY: Globe Electric, 2264 East 6th Street, San Bernardino,
CA 92410, www.globe-electric.com