TURTLE BEACH Stealth 700 Gen 2 MAX Wireless Gaming Headset User Guide

TURTLE BEACH Stealth 700 Gen 2 MAX Wireless Gaming Headset

IMPORTANT PLEASE MAKE SURE YOUR HEADSET IS UPDATED WITH THE LATEST FIRMWARE.
Connect to the Turtle Beach Audio Hub for Windows or Mac to update firmware.
Customize your settings with the Turtle Beach Audio Hub mobile app for Android and i0S.
turtlebeach.com/audiohub

CONTENTS

HEADSET CONTROLS

Use Superhuman Hearing” Mode to pinpoint quiet audio cues like enemy footsteps and weapon reloads. During gameplay, you can activate and deactivate Superhuman Hearing” by pressing the MODE button once, quickly.
Microphone Mute Flip up mic to mute. There is an audible tone when the mic is muted or unmuted. Custom EQ Presets available through the Turtle Beach Audio Hub mobile app.

EQ PRESET

• Signature Sound
• Bass Boost
• Bass + Treble Boost
• Vocal Boost

CHARGING

The Stealth'” 700 Gen 2 MAX gives you 4D hours of rechargeable battery life. Make sure to charge it regularly before storing.

Headset Storage
Always charge your headset before storing it for any extended period of time (longer than 3 months]. Never store the unit in temperatures above 113°F/45″C.

Bluetooth Function

BLUETOOTH° SETUP | CONFIGURATION BLUETOOTH°
Your Stealth” 700 Gen 2 MAX headset will enter Bluetooth pairing mode once powered on. If no Bluetooth connection is made in two minutes, Bluetooth pairing mode will stop. To put your headset into Bluetooth pairing mode, follow these steps:

1. Hold down the Bluetooth Button until the “Bluetooth° Pairing” prompt plays.
2. After placing your headset in pairing mode, select the headset from within your device’s Bluetooth Settings menu to connect to your headset.

FUNCTION: BUTTON ACTION

• Play Pause Press Once
• Press Twice Quickly
• skip forward Press Twice Quickly end Hold
• fast forward Press Three Times Quickly
• Skip Back  Press Three Times Quickly and Hold
• Answer call Press Once
• End call  Press Once
• Reject call Press end Hold

SETUP FOR XBOX

SURROUND SOUND FOR XBOX (ONLY AVAILABLE ON XBOX)

1. Go to Settings General Volume & Audio Output
2. Set Headset Format to Windows Sonic for Headphones

For updated setup instructions visit: turtlebeach.com/sonic

SETUP FOR USB MODE

USB TRANSMITTER COMPATIBILITY

Nintendo Switch” wireless compatibility supported through Bluetooth for game audio only or USB connection while in docked mode for game & chat audio with games that support chat capability.

LED BEHAVIORS

RE-PAIRING

1. Connect your transmitter to an available USB port on your console. Your transmitter will double-blink green as it searches to pair with your headset.
2. Power on your Stealth 700 Gen 2 MAX for Xbox and the LED indication will double-blink green as it searches for your transmitter.
3. Within 20 seconds, the LED indication on the headset and transmitter should turn a solid green to indicate a successful pairing.

MAPPABLE BUTTONS

turtlebeach.com/audiohub
Scan this aR code to get the Audio Hub App on your phone so you can customize your remappable buttons.

The MODE Button and Mappable Wheel can be assigned to a new function based on your gaming style. To change the button’s assignment, follow these steps:

1. Download the Turtle Beach Audio Hub mobile app on your i0S or Android device.
2. Enable Bluetooth on your selected device, and use the Bluetooth pairing method to access the app.3
3. After pairing, open the app and swipe to the second settings screen to assign new functions.
4. Once selected, your headset will save this configuration.

ProSpecs” Glasses Relief System

For those who game with glasses, adjust the ProSpecs” Glasses Friendly

The ProSpecs” Glasses Relief system creates a channel in the ear cushion to help reduce pressure on your glasses frame. To adjust this, you must first remove the ear cushion. Hold the ear cushion firmly and pull it away from the speaker. The ear cushion should come off with minimal effort.

Depending on the size of your glasses frame, use the tab adjustment to create the appropriate sized channel in the ear cushion. By default, the adjustment tab is set to the shallowest setting. To increase the size/depth of the channel in the ear cushion, simply pull the tab and attach it o the post based on your preference.

After you’ve adjusted the glasses friendly channel to your liking., place the ear cushion back onto the speaker. The ear cushion should snap into place with inimal effort.

Regulatory Compliance Statements for the Stealth” 700X Gen 2 MAX

Models: Stealth 700X-MAX-RX and Stealth 700x-MAX-TX Local Restrictions on Radio Usage Caution: Due to the fact that the frequencies used by wireless devices may not yet be harmonized in all countries, these radio products are designed tor use only in specific countries, and are not allowed to be operated in countries than those  designated use. AS a user or you are responded or ensuring that ne proudest are used  tor that they are configured with the correct selection of frequency and channel tor the country of use, Any deviation from the permissible power and frequency settings for the country of use is an infringement of national law and may be punished as such. o determine whether you are allowed to use your wireless network device in a specific country, please check to see if the radio type number that is printed on the identification label of your device is sited in the manufacturers UEM Regulatory Guidance document at the following http://www.turtiebeach.com/homologation or contact hurtle Beach directly. clomp This section includes the following FCC statements for the Stealth700X- MAX-RX and Stealth700X-MAX-TX: FCC ID: XGB-2790RX & XG-Z770I Class interference statement Non-Modification Statement RF Radiation Exposure & Hazard warning9 Class B Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to Part 15 of the FCC Rules. These Limits are designed to provide reasonable protection against harmful interference in a residential installation, His equipment generates, use’s, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this user is encouraged to try to correct the interference one or more,

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected,
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

RF Radiation Exposure & Hazard Statement
To ensure compliance with FCC RF exposure requirements, this device must be installed in a location such that the antenna of the device will be greater than 2 cm l0.8 in.) from all persons. Using higher gain antennas and types of antennas not covered under the FCC certification of this product is not allowed. Installers of the radio and end users of the product must adhere to the installation instructions provided in this manual. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Non-Modification Statement Use only the supplied internal antenna. Unauthorized antennas, modifications, or attachments could damage the Stealth700X-MAX-RX and Stealth700X-MAX-TX and violate FCC regulations. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment, Please contact Turtle Beach for a list of approved 2.4 GHz antennas. This product is compliant with the Consumer Product Safety Improvement Act of 2008, Public Law 110-314 [CPSIAJ

Canadian ICES Statements C:
3879A-2790RX & 3879A-2790TX (Stealth 700X-MAX-RX and Stealth 700X- MAX-TXI This device complies with ICES-003 and RSS-247 of Industry Canada. Operation is subject to the following two conditions:

1. This device may not cause interference, and .
2. This device must accept any interference, including interference that may cause undesired operation of the device.

To prevent radio interference to the licensed service li.e. co-channel Mobile Satellite systems) this device is intended to be operated ensign and not supported by Stealth700X-MAX-RX and Stealth700X-MAX-TX. Stealth700Y-MAY.TY  is installed outdoors is subject .

RF Radiation Exposure & Hazard Statement To ensure compliance with RSS-102 RF exposure requirements, this device must be installed in a location such that the antenna of the device will be greater than z cm u.8 away tromp a persons. Using higher gain antennas and types of antennas not covered under the certification of this product is not allowed. Installers of the radio and end users of the product must adhere to the installation instructions provided in this manual. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

European Union and European Fair Trade Association Regulatory Compliance entries of the European Union and the European Fair Trade Association. These countries, listed below, are referred to as The European Community throughout this document: AUSTRIA, BELGIUM, BULGARIA, CYPRUS, CZECH REPUBLIC, DENMARK, ESTONIA, FINLAND, FRANCE, GERMANY, GREECE, HUNGARY, IRELAND, ITALY, LATVIA, UTHUANIA, LUXEMBOURG, MALTA, NETHERLANDS, POLAND, PORTUGAL, ROMANIA, SLOVAKIA, SLOVENIA, SPAIN, SWEDEN, UNITED KINGDOM, ICELAND, LICHTENSTEIN, NORWAY, SWITZERLAND.

Declaration of Conformity Marking by this symbol CE indicates equipment compliance meets the following conformance standards Radio Equipment Directive [RED) of the European Union {2014/53/EU). own Safety: EN 62368-1: 2014 +A11l- Mark License EC 62368-1:2014 1CB Scheme Certificate EN 50332-1:2013, EN 50332-2: 2013, EN 71-3: 2013 Additional licenses issued for specific countries available on request EMC: EN 55032: 2015+A11: 2020, CISPR 32: 2015, EN 301 489-1 v2.2.3 (2019-11), EN 301 489-9 v2.1.1 [2019-04) EN 61000-4-2: 2009, EN 61000-4-3: 2006 + A1: 2008 + A2: 2010, EN 61000-4-8: 2010 The products are licensed, as required, for additional country specific standards for the International Marketplace. Additional issued censes available upon request. Radio: EN 300 328 v2.2.2 (2019-07) SAREN 62311:2020 Environmental: RoHS 2015/863 amending Annex II to 2011/65/EU, WEEE 2012/19/EU, REACH 2006/1907/EC, Packaging 94/62/EC, Battery 2006/66/EC, Toys Safety Directive 2009/48/EC Please visit the following URL for a complete copy of the Declaration of Conformity: http://www.turtlebe

Warning
This is a Class B product. In a domestic environment, this product may cause radio interference, in which case.
This symbol on the product or its packaging indicates that this product must not be disposed of with your other noumena waste .Instead, your responsory to dispose your waste equipment oy designated collection point for the recycling of waste electrical and electronic equipment, The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that waste for reguli leas your was young. Pease conduce your Local dunun, Or where you percids your product Turtle Beach Europe Ltd is obligated as a producer with a main activity of selling under The Producer Responsibility Obligations I Packaging Waste! regulations 2007. 1o Turret our obligation we are registered with imply Direct and their recycling Room, Here you wig find advice and information on packaging waste management, recycling symbols and the waste hierarchy principles of reduce, reuse and recycle. https://www.complydirect.com/the-recycling-room/

To access the rating label:

1. Remove the left ear pad.
2. Place ear cushion back onto the silver ring of your headset.

Not seeing what you’re looking for here? Visit turtlebeach.com/support for the latest Tech Support information.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>