ELMO L-12G Document Camera User Guide

ELMO L-12G Document Camera

Package contents

Preparation

Using the product

Detailed usage of the product

For detailled information about the Instruction Manual and tutorial videos, refer to the following website:
https://www.elmousa.com/

https://www.elmoeurope.com/index.php/én/

IMPORTANT SAFEGUARDS

Make sure to read the “IMPORTANT SAFEGUARDS” in this guide before using this product. For details about specifications andinstruction manual of the product, refer to the following official website.
https://www.elmousa.com
https://www.elmoeurope.com

• Read Instructions
  All the safety and operating instructions should be read before the appliance is operated.

• Retain Instructions
  The safety and operating instructions should be retained for future reference.

• Heed Warnings
  All warnings on the product and in the operating instructions should be adhered to.

• Follow Instructions
  All operating and use instructions should be followed.

• Cleaning
  Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

• Attachments
  Do not use attachments not recommended by the product manufacturer as they may cause hazards.

• Water and Moisture
  Do not use this product near water – for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

• Placement
  Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.

• Ventilation
  Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

• Power Sources
  This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

• Grounding or Polarization
  This product may be equipped with either a polarized 2-wire AC line plug (a plug having one blade wider than the other) or a 3-wire grounding type plug, a plug having a third (grounding) pin. If the 2-Wire polarized plug will not fit in the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. The 3-wire grounding type plug will fit into a grounding type power outlet.
  This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug.

• Power-Cord Protection
  Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

• Lightning
  For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

• Overloading
  Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

• A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

• Object and Liquid Entry
  Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

• Servicing
  Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

• Damage Requiring Service
  Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

  • When the power-supply cord or plug is damaged.
  • If liquid has been spilled, or objects have fallen into the product.
  • If the product has been exposed to rain or water.
  • If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.
  • If the product has been dropped or damaged in any way.
  • When the product exhibits a distinct change in performance – this indicates a need for service.

• Replacement Parts
  When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

• Safety Check
  Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

• Heat
  The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. SA 1965
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection of waste electrical and electronic equipment in the EU countries. Please do not throw the equipment into the domestic refuse. Please use the return and collection systems available in your country for the disposal of this product.

WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification or Declaration of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with this device. If this equipment has more than one interface connector, do not leave cables connected to unused interfaces. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

FOR UNITED STATES USERS:
INFORMATION
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

USER-INSTALLER
CAUTION: Your authority to operate this FCC verified equipment could be voided if you make changes or modifications not expressly approved by the party responsible for compliance to Part 15 of the FCC rules

BEFORE YOU USE

• Be sure to use the supplied power cord and the AC adapter.
• The power cord and AC adapter that come with this product are for this product only. Do not use them with another product.
• Be sure to use the power cord applicable to your local power specifications. If the product was sold in Japan, use the AC adapter sold with the product with 100 VAC and 50 or 60 Hz.
• When storing the product, do not leave it under direct sunlight or by heaters. It may be discolored, deformed, or damaged.
• Do not place this product in any humid, dusty, salt bearing wind, or vibrating locations. Use it under the following environmental conditions:
  • Temperature: 0℃～ 40℃
  • Humidity: 30％～ 85％(No condensation)
• Use a soft, dry cloth for cleaning. Do not use any volatile solvent such as thinner or benzene.
• Luminescent and Black Spots There may be some pixels that do not properly operate due to the use of CMOS Area Image Sensors made-up of many pixels. Though luminescent or black spots may be found on the screen, it is a phenomenon peculiar to the CMOS Area Image Sensors and is not a malfunction.
• Follow the guidelines below to prevent the unit from dropping or overturning.
  • Use the product on a stable base, desk, or table. Do not place the product on an unstable base or slanted location.
  • Place or wire the product so as to prevent the cables from being pulled or drawn.
• Do not point the lens directly to the sun. It could degrade the imaging capability.
• Do not look directly into the LED light. If you look directly into it at pointblank range, your eyes may be injured.
• If this product is used for longer than the warranty period, its performance and quality may deteriorate due to the lifetime of its parts. For parts replacement (on chargeable basis), consult the dealer from whom you purchased this product or our branch/office near your location.
• Battery precautions
  • A lithium coin battery is included in the product. Do not swallow the lithium coin battery. There is a risk of injury due to chemical reactions.
  • If the battery is swallowed, it can cause serious internal damage leading to death in less than two hours.
  • If you have swallowed the battery, or if you suspect that the battery is somewhere in your body, seek medical advice immediately
  • Keep new and used batteries out of the reach of children.
  • If the battery compartment of the remote control does not close tightly, stop using the remote control and keep it out of the reach of children.
  • Do not replace the wrong type of battery. It may cause an explosion.
  • Do not expose the battery to excessively high temperature or low pressure at high altitude while using, storing or carrying the battery.It may cause an explosion or the leakage of flammable liquid or gas
  • Do not dispose of the battery in a fire or in a heated furnace. An explosion may occur.
  • When disposing of the battery, follow the rules of the local government.
  • Do not mechanically crush or cut the battery. An explosion may occur.
• Microphone Connecting a microphone other than an electret condenser microphone (a microphone for a computer) may cause malfunction.
• About the Audio Input Port Audio input is Port under voltage. Adding external output devices can damage them.
• Copyright Unless used for personal use, it is prohibited strictly under copyright law to use any photo files without the prior consent of the copyright holder. Even if using for personal use, be careful that there could be a situation where video or audio recording is restricted or illegal.
• The contents of this document are subject to change without notice. The latest version is available from the following official website: https://www.elmousa.com https://www.elmoeurope.com
• It is prohibited under copyright law to use or copy any part or the whole of this document without our prior written consent.
• ELMO shall not be liable for any claim for damage or loss of earnings or any claim raised by a third person due to the use, malfunction or repair of this product.

TRADEMARKS AND LICENSES

• All other company/product names described in this manual are trademarks or registered trademarks of their respective companies.

IC Warning

This device complies with CAN ICES-003 (B)/NMB-003(B). This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device

IC Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC regulatory conformance:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the userʼs authority to operate the equipment.

FCC RF exposure statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

References

• エルモは教育ICTを基盤として様々な映像情報コミュニケーション価値を創造します。
• エルモは教育ICTを基盤として様々な映像情報コミュニケーション価値を創造します。
• ELMO EUROPE SAS
• ELMO - Visualiseur et solutions interactives pour les écoles, les universités et l'éducation
• ELMO USA | Connecting Minds

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>