LASER SPK-B50-033 Pulse Bluetooth Speaker Instruction Manual

June 4, 2024
Laser

LASER logo Instruction ManualLASER SPK B50 033 Pulse Bluetooth
Speaker Laser Pulse Bluetooth Speaker
SPK-B50-033

WHAT’S IN THE BOX:

  • 1 x SPK-B50-033 Speaker
  • 1 x USB Type-C Charge Cable
  •  1 x 3.5mm AUX cable
  •  1 x User Manual

SPECIFICATIONS:

Bluetooth Version: 5
Bluetooth Range: 10 meters
Bluetooth Name: SPK-B50-033
Speaker Power: 5W
Frequency: 20Hz – 20KHz
Battery: 3.7V 1200mAh
Charging: 5V DC
Charging Time: Approx 3 – 4 hours
Battery Runtime: Approx 3 hours at 100% or 4 hours at 50%
Standby Time: 10 hours

FEATURES:

  • Bluetooth Wireless Connectivity
  • USB – upto 32GB using FAT32 or exFAT file system only.
  • Micro SD Card – Up to 32Gb using FAT32 or exFAT file system only.
  • 3.5mm AUX IN
  • Rechargeable Battery
  • RGB LED Lights

CONTROLS:

LASER SPK B50 033 Pulse Bluetooth Speaker -
CONTROLS

1. Volume Down| • Hold to decrease volume.
• Tap to skip trackback.
---|---
2. Mode| • Tap to change between Bluetooth, AUX, Micro SD or USB.
3. Volume Up| • Hold to increase the volume
• Tap to skip track forward
4. Power| • Press and hold to turn the device on/off.
5. RGB Light| • Tap to cycle between 11 different LED modes or turn the light off.
6. Micro SD Card| • Only MP3 files on FAT32 or exFAT file systems are supported.
• Please try formatting storage to the suggested file system if not detected.
7. AUX Input| • Connect a source device via the supplied 3.5mm AUX cable for music playback.
8. DC 5V| • Insert one end of the USB-C cable into the DC 5V port and the other end into a USB wall adapter (not included) to start charging.
• Approx. 3 – 4 hours for a full charge.
9. USB| • Only MP3 files on FAT32 or exFAT file systems are supported.
• Please try formatting storage to the suggested file system if not detected.

BLUETOOTH PAIRING:

  • With the speaker on tap the MODE button until you reach Bluetooth mode.
  • Search for “SPK-B50-033” under the Bluetooth settings of the device you are connecting to e.g. smartphone.

TIP: If a password is requested enter “0000” or “1234”

PHONE CALLS:

  • When there is an incoming call, the speaker will ring to alert you of the call (any current playback will be paused).
  • Tap the power button to answer or press and hold the power button for 2 seconds to reject the call.
  • When the call is finished, tap the power button to hang up. • If the speaker is connected to a smartphone, tapping the power button twice will redial the last number.

TROUBLESHOOTING:

No Power:| • Check battery level and charge if required.
• Try turning on the speaker while connected to a power source.
• Try charging the speaker with a USB Wall Adapter (like a smartphone charger) instead of a laptop/computer.
---|---
USB or Micro SD Card not recognized or files not playing:| • Make sure the USB or Micro SD Card is 32gb or less.
• Check the USB or Micro SD Card has been formatted to the  FAT32 or exFAT file system. If the USB/Micro SD Card is new out of the box, we recommend you format it on a Windows-based computer first before copying music to it, then using it with the speaker.
• Make sure to only use MP3 music files copied to the USB or Micro SD Card.
Cannot find speaker when searching for Bluetooth devices:| • Make sure the speaker is in Bluetooth pairing mode.
• Try turning the speaker off then on and try again.
• Try turning off then on the device you are pairing too.
• Bring the speaker closer to the device you are pairing too.
• If there are any unidentified devices on your Bluetooth search list, try selecting the top or bottom option to see if it pairs with  the speaker.

**WARRANTY AGAINST DEFECTS

**

Laser warrants your new product to be free from defects in materials and workmanship for 12 months, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided. The benefit of this warranty is in addition to your rights under the Australian Consumer Law and to other rights and remedies of the consumer under a law in relation to the goods or services to which the warranty relates. Through a network of retailers and resellers, Laser will provide you with your choice of a refund, repair, or exchange (where possible) for this product if it becomes defective within the warranty period. This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse, normal wear and tear, neglect, or improper storage. Please retain your receipt as proof of purchase.

How to make a product warranty claim:

  1. Find your receipt with date of purchase. If this is not available, Laser will make an assessment based on the date of manufacture, condition of the product and type of defect.

  2. Please contact your original place of purchase. They will assess the nature of the fault and refund or replace the product as per their store refund or warranty policy.

  3. If your original place of purchase cannot be contacted, please contact Laser with a description of the fault. To assist our team in providing you with a quick resolution,  please include any photos and/or a short video demonstrating the fault with your product.
    • Phone: (02) 9870 3355
    • Email: support@laserco.com.au
    • Online: www.laserco.net/support/warranty and follow the website instructions
    • Business Address: U1 6-8 Byfield Street, Macquarie Park, 2113, NSW, Australia

  4. The laser will review your claim and in the first instance, attempt to troubleshoot and resolve the issue for you without the need to return the product.

  5. If it is determined via troubleshooting that your product may be faulty, our team will provide instructions to have the product returned for assessment. If the product does need to be returned within the warranty period, Laser will arrange return shipping at no cost to you.

  6. Once we receive the product, our experienced technicians will assess it and determine how best to resolve the issue.
    Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
    You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the  goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

For more helpful guides visit us at LASER
www.youtube.com/LasercoAu
www.laserco.com.auhttps://www.youtube.com/channel/UCQOuBKnSya0x9zCjPfYzklg

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals