V-TAC VT-30ST LED Street Light Chip Samsung Street Light Instruction Manual
- June 8, 2024
- V TAC
Table of Contents
V-TAC VT-30ST LED Street Light Chip Samsung Street Light
Horizontal Installation
Technical Specifications
WARNING
- Please make sure to turn off the power before starting the installation.
- The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
Caution, risk of electric shock
This marking indicates that this product should not be disposed of with other household wastes.
INSTALLATION & WIRING DIAGRAM
-
Switch OFF the power before starting the installation
-
Connect supply wires to luminaire as displayed
in the wiring diagram. -
Pass the cable through the mounting adaptor, and fix 4 screws on the street light with 13mm Allen wrench.
- Fasten 4 screws against the pole with 13mm allen wrench.
-
Turn ON the power to Test
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installing and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 5 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only
Warning:
- Ensure electricity is Switched OFF before starting the installation.
- Please read through all following instructions before installing the unit.
- User should prepare all the necessary accessories and spare parts (Spare parts not provided) including junction box.
- The raised lighting must be connected to the earth ground.
- Install only by certified Electrician. Strictly follow these instructions for installing, avoid the intensity of power cable during installing.
In case of any query/issue with the product, please reach out to us at:
For More products range, inquiry please contact our distributor or nearest
dealers. V-TAC EUROPE LTD
Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B