HAVIT VPR9752IP54-72-5M RGBCW Viper Kit Instruction Manual

HAVIT VPR9752IP54-72-5M RGBCW Viper Kit

Thank you for purchasing the Havit Lighting Viper Smart Light Kit. Please take time to read and understand the instruction sheet below. Smiggle LED Bluetooth Smart Strip allows you to control your light via your smart device or using voice control as long as you have internet.

Model

PRODUCT FEATURES

• Wi-Fi+IR connect, mobile phone APP, and Remote Control Full range of RGB+CCT
• 1-100% dimming function
• Music function

WIRING DIAGRAM

DIMENSION

INSTALLATION

This unit is DIY compatible, however, if wiring is involved, MUST be completed by a qualified electrical contractor

1. Installation for the controller: Fix the controller at the designated location using the 3M tape.
2. Connection and installation for the LED Strip: Peel the 3M tape on the end of the male pin on the side of connecting LED strip (Peel 10cm long); Connect the strip to the controller with male and female plug; Fix the strip with tearing off the 3M tape on the backside.
3. Connect the power supply with the controller.
4. Plug into the power point and turn on the power.

FUNCTION DIAGRAM

Function button:
Switch ON/ Switch Off Modes Change Reset-Press for more than 5 seconds

APP FUNCTION

• Remote Control: can be controlled anywhere
• Timer Function: Set the timer to turn on and turn off the strip via Tuya Smart approved gateway.
• Intelligent Scene: The system sets a variety of intelligent scenes, and different scenes correspond to different lighting atmospheres.
• Group: Group is available (only for the same type of product).
• Device Sharing: The device is shared with other user control devices in the home.

DIY SET UP

Download APP

1. Serch “TuyaSmart” from App store or Google Play.
2. Scan the QR Code from the label or user manual.

The App is compatible with Android 4.0 and ISO 8.1 and higher versions.

Sign up a new account or log in with an existing account

Connection

1. Turn the Bluetooth in your phone, open the main interface of the APP and turn on the LED Strip;

2. The App will pop up tips with “Devices to be added”; Or choose to “Add device”;

3. Go to “Add Manually”, Click “Lighting”, Select “Strip Light (Wi-Fi)”;

4. Make sure the light has already been flashing;

5. if the strip does not flash.
   Turn on and trun off the power for 3 times, the strip will flash.

6. Select 2.4Ghz Wi-Fi Network and enter the password, waiting until pairing success (make sure your mobile and the smart devices are in the same Wi-Fi network);

7. Then go to the interface of “Scanning devices”, after scanning success and choose “next” to go into operation modes.

WIFI Music + IR Remote Controller Manual

WARRANTY

Products have 3 years (from date of purchase) replacement warranty. Products have to be connected to permanent live power otherwise warranty will be void.
This warranty does not cover loss or damage by misuse, incorrect installation, incorrect voltage or non-authorized electrical connections, or adverse external conditions (such as power surges and dips, exposure to heat, corrosion etc). Products that have been altered in any way or used other than in accordance with instruction are not covered by this warranty.

References

• Havit Lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>