anko 43155330 Laptop Stand with Fans RGB Instruction Manual
- June 8, 2024
- Anko
Table of Contents
anko 43155330 Laptop Stand with Fans RGB
To ensure optimum performance and safety, please read this instruction carefully before operating this product.
Weight capacity: 6.9kg
Operation
- Take out the cooler from the packaging.
- Find the small pad at the bottom of the product.
- Take it out and turn the cooler to the front side.
- Find 2 small holes around the LCD display control panel.
- Insert the pad into holes.
- Pull out the brackets at back and choose the angle you need from 7 adjustments.
- Put your laptop (Not included) on the cooler
- Insert one of the cable USB connectors into the laptop’s USB port, and connect the other end of the USB cable to the cooler‘s USB port, press the power button then the cooling fans will start to work.
- Press the light button on the LCD display control panel to change 10 kinds of light modes.
- Press the +/- button to increase/decrease the fan speed.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>