pTron Pulsefit Pro Bluetooth Calling Fitness Smartwatch User Manual

pTron Pulsefit Pro Bluetooth Calling Fitness Smartwatch

Requirements
Android 4.4 & above | iOS 9.0 & above Bluetooth 5.0

Downloading ‘Da Fit’ Mobile App

For downloading the App go to Playstore or App Store and search ‘Da Fit’. Now, download and install the app
OR
Type in Your Phone Browser
hTTp://plus.crrepa.com/app-download/dafit Now, download and install the app.
OR
Switch on the smartwatch, go to settings and then inside seng you will find QR code option, just click on it you will get the QR code. Now, scan the QR code from your phone, and you will get a link for downloading the ‘Da Fit’ app. Download and install the App in your smartphone.

Charging the Smartwatch

1. Turn OFF the Smartwatch before Charging.
2. Simply, hold the 2-pin connector of the USB charging cable near the 2 small round magnec charging interfaces. The connector will get connected to the interface through the magnetic pull. It’s a completely sealed system free of exposed contacts. Plug the USB end of the cable into a DC5V/1A power source.
3. When the smartwatch is fully charged, remove the watch from charging and unplug the USB charging cable from the power source.

Note: You can directly check the charging by pressing the crown-like buon on the right side of the dial. Pressing once will show the charging status on the display.

Audio Connectivity

1. Awake the smartwatch display by pressing the crown-like button on the right side of the dial.
2. Touch the screen and slide the display towards left.
3. You will get a call menu image with turn on option at the bottom of the image.
4. Click on TURN ON.
5. Now, open the Bluetooth function on your smartphone.
6. Search for “pTron Audio” in the available Bluetooth devices list.
7. Click and connect with “pTron Audio”.
8. Now, the smartwatch is connected to the mobile for calling purpose.

Pairing:

1. AFTer mobile App installed, open the App and set up your profile.
2. At the boom menu, you will see a smartwatch icon, click on it.
3. Click on “Add a device” & then select your smartwatch.
4. In this way your smartwatch will get paired with your smartphone.

Full Touch Control Display

Phone Calls:

1. After connecting the smartwatch with the phone, you can use the smartwatch to dial and to control the phone calls – making & answering calls. You can also manage the call volume through the smartwatch.
2. You can also view the call history in the watch.
3. You can save up to 8 contacts in the smartwatch through the mobile App.

Open the mobile App, go to smartwatch opon & then go to Favorite contacts and there you can select 8 contacts in the address book and display their shortcuts in the smartwatch.

Music Player

1. After connecting the smartwatch with a smartphone, you can remote control the music player on your phone through the smartwatch.
2. You will get Play/Pause/Next Song/Previous Song options on the display.

Steps
Smartwatch automatically tracks the steps and can be seen in the watch. Need to wear the smartwatch properly to get the real data.
Note: At midnight the data or the movement stats will get zero automacally.

Sleep
Wear the smartwatch properly before sleeping, then it will provide the data of hours slept and the quality of sleep stats in the mobile App and in the smartwatch.
Note: Sleep stats will get zero at 8 PM automatically.

HR (Heart Rate)

1. The Smartwatch can record your heart rate all day.
2. You could also tap on the HR function page to start measuring heart rate. The optical sensor at the backside of the dial will start flashing green light.
   Note: This smartwatch is not a medical device.

BP

1. Tap on the Blood Pressure function page to start measuring your blood pressure. The optical sensor at the backside of the dial will start flashing green light.
2. On the Blood Pressure page, you can view the blood pressure measurement data of the lasts.
   Note: This smartwatch is not a medical device.

SPO2

1. Tap on the SPO2 function page to start measuring your SPO2.
2. On the SPO2 page, you can view the SPO2 measured data of the last me.
   Note: This smartwatch is not a medical device.

Weather:
On the Weather function Page, you can view the current temperature.

Exercise

1. Tap on this icon in the menu, you will find 8 exercises – Walking, Running, Cycling, Skipping, Badminton, Basketball, Football & Swimming.
2. You can select any of the 1 exercises and the stats will be monitored on the watch.

Remote Capture:
Turn your wrist or Click to share.
Note: This feature allows you to control your phone’s camera shuer through BT.
Reminders

1. To Move: Can be activated and its valid me from 10:00 – 22:00. This function will remind you to move/relax for 1 hour of singing by vibrating.
2. To Drink Water: Can be activated and can set me intervals & duration as per our requirement.
   Note: You can turn on/off these features via App

Clock

1. Alarm – Can set 3 alarms.
2. Time Format – Can change my format to a 12-hour or 24-hour format.
3. Countdown – Have countdown for 1, 3, 5, 10, 30 minutes and 1 & 2 hour.
4. Stopwatch – This can be used as like a mer

Other Features

1. BRIGHTNESS – Can adjust (increase or decrease) the Brightness level.
2. FOCUS BREATHING/Meditative Breathing – Can check the Inhale & Exhale by doing the following steps in 8 mes
3. THEATRE MODE – After caving theatre mode, the smartwatch will turn off the vibration & turn down the brightness.
4. TORCH – While switching it ON, the watch display will get turned on, which provides some light in a dark place.
5. DISTURB – Turn ON to stop geng nofications.
6. LANGUAGE – Can change the language of the smartwatch through App with the connected device.
7. FIND DEVICE – Can click on this with the connected device in the App and the smartwatch will start vibrang.
8. QUICK VIEW – Just turn the wrist and the screen will appear.
9. DIAL SWITCH – From this you can select any of the wallpaper for the smartwatch screen.
10. WATCH FACES – From the app you can select the wallpaper or you can also select any of the pictures from the gallery of the connected device to set as a wallpaper in the smartwatch.

Important

1. This smartwatch is NOT a Medical Device.
2. Take off your band before having a shower or swimming.
3. Please connect the band when synchronizing data.
4. Use the 5V USB charging adapter only.
5. Do not expose the band in high moisture or extremely high temperatures.
6. When the APP crashes or reboots, please check the phone memory, clear it and try again, or exit the app to reopen it.
7. The strap is not covered in the manufacturer’s warranty.
8. The manufacturer/brand owner reserves the right to modify the content of this user manual without prior noficaon. Some functions are different in the various so ware versions, which is normal.

References

• Da Fit - Apps on Google Play

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>