ion8i Access Point User Guide
- June 8, 2024
- iO
Table of Contents
ion8i Access Point
Thank you for choosing ion8i Wireless Access Point with 4×4:4 Multi-User MIMO and 802.11ac Wave 2 compliance.
Packaging Content
- ion8i Wireless Access Point
- Quick Start Guide
- AC Power Adaptor
- Mounting Bracket
- AC Power Adaptor(Varies by Region)
- ion8i Access Point
- Mounting Bracket
Product Overview
Mounting of ion8i Access Point
-
Place the Mounting Bracket which came with the package on a wall or ceiling and mark holes with a marker where you will insert the screws. Drill holes in the marked points and insert the plastic wall anchors.
-
Use the supplied screws and attach the mounting bracket to the wall.
Note: Make sure that the mounting bracket is tightly installed before mounting the Access Point on the wall or ceiling. -
Align the mounting slots of Access Point with the hooks of the mounting bracket
Unmounting of ion8i Access Point
- Slightly push the Access Point towards the mounting bracket and slide the hooks out from the mounting slots.
WARNING: Insecure mounting might damage the device or cause injury. IO is not responsible for damages incurred by insecure wall or ceiling mounting.
Getting the ion8i Online
Step 1: Power up
The Access Point can be powered up using PoE Adaptor or AC Adaptor (12V) as
shown below:
Note: The Reset button serves two functions:
Restart: Press and release the Reset button quickly.
Restore to Factory Default Settings: Press and hold the Reset button for more
than five seconds.
Step 2: Connect to the network
Follow the steps mentioned below and connect the Access Point to a network
through GUI:
- Connect an Ethernet cable to the computer.
- Connect the other end of the Ethernet cable to the LAN port on the ion8i Access Point.
- Open the web browser and enter the Access Point static IP address in the address bar: 192.168.1.1
- A login screen will appear.
- Enter the default login credentials as provided with your ion8i Access Point.
NOTE: Refer the respective user manual on our website www.ionetworks.in for detailed information on GUI features.
Step 3: Check the LED status
Observe the following safety precautions to avoid damage to the ion8i Access Point:
- Do not subject the device to high temperatures.
- Keep away from high voltage cables.
- Disconnect the device before cleaning it.
- Do not wipe the device with a damp cloth.
- Do not open the enclosure of the Access Point.
- Fasten the device tightly with the mount.
Contact us:
- ADDRESS: 8, Commercial Complex, Masjid Moth Greater Kailash-II, New Delhi-110048
- Email: iosupport@hfcl.com
- Website: www.hfcl.com
- www.io.hfcl.com
©HFCL Limited. All rights reserved. IO logo is registered trademarks of HFCL Limited Specifications are subject to change without notice.
References
- HFCL | Leading Digital Network Solutions | Manufacturers of Optical Fiber Cables
- IO by HFCL| End-to-End Managed Wi-Fi Solution for building digital networks of tomorrow.
- IO by HFCL: Wi-Fi solutions to bridge digital divide
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>