QPAD QH-900 Wireless Gaming Headset User Manual
- June 8, 2024
- QPAD
Table of Contents
QPAD QH-900 Wireless Gaming Headset
CHARGING QH-900 HEADSET
TYPE-C PORT
For general charging only, fast charging and data transmission are not supported Q logo LED in Red color when charging.
POWER ON/OFF & 2.4GHz CONNECTION
POWER ON
Press and hold the power button for 3 seconds to power on/off QH-900 with Bluetooth and 2.4GHz at same time.
WIRELESS 2.4GHZ RE-PAIRING
Press and hold the power button for 6 seconds when head set is off.
(Q logo LED turn to flash green color.)
Q LOGO LED LIGHT ON/OFF
Press the power button one time during the headset is power on.
Q logo LED
(Wireless 2.4Ghz Connection)| Connected – The LED (Q logo) is on with blue
color.
---|---
Re-Connecting – Green LED (Q Logo) is breathing slowly.
Pairing – Green LED (Q LoG) flashes fast.
The Q logo without lighting if your switch off the LED light.
‘The2.4Ghzconn8ctlonwlllshutollwhanldle10mln1. Please power off and on to reboot the connection.
BLUETOOTH CONNECTION
BLUETOOTH PAIRING
Press the Bluetooth button for 6 seconds when the headset is on .
(Bluetooth LED light turn to continue quick flash.)
INCOMING CALL
Single press the Bluetooth button – Answering/End voice call.
MEDIA
Si ngle press – Play/Pause Music.
Double press- Skip Track.
Triple press – Previous Track.
Bluetooth LED (Bluetooth Connection)
| Connected – The indicator is on statically.
---|---
Re-Connectina – The indicator breath slowlv.
Pairing – The indicator flashes fast.
Bluetooth sleep mode – The indicator is off.
The Bluetooth connection will go into sleep mode when not connecting any devices for 5 mins. Please press the Bluetooth button for 6 seconds to re-pair the devices
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>