GAINSBOROUGH Trilock Traditional Dummy Trim Entry Leverset Bright Chrome Instruction Manual
- June 8, 2024
- GAINSBOROUGH
Table of Contents
GAINSBOROUGH Trilock Traditional Dummy Trim Entry Leverset Bright Chrome
INSTALLATION INSTRUCTIONS
STEP 1. Hole Preparation
- Place the template on the door face in the desired location.
- Mark the location for the two holes.
- Drill 2 x 3mm holes 25mm deep.
STEP 2. Install Dummy Trim
- Place the base plate on the door face over the drilled holes.
- Insert the two screws through the screw holes in the rose plate and tighten firmly
- Place rose cap over base and place spiget
- Push leaver over post until it clicks in place
Installation template for dummy applications
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>