Teufel BOOMSTER XL Mobile active Bluetooth Speaker with Integrated FM Radio Instruction Manual
- June 8, 2024
- Teufel
Table of Contents
Technical Description and Operating Instructions BOOMSTER XL
Mobile active Bluetooth ® speaker with integrated FM radio
General Notes and Information
Notice
The information in this document may change without prior notice and in no way
constitutes any liability on the part of Lautsprecher Teufel GmbH.
No part of this user manual may be reproduced in any form or be broadcast in
any way electronically, mechanically, by photocopy or recording without the
written permission of Lautsprecher Teufel GmbH.© Lautsprecher Teufel GmbH
Version 3.1 January 2022
Trademarks
© All trademarks are the property of their respective owners. Bluetooth ® and
the Bluetooth ® symbol are trademarks of Bluetooth SIG, Inc. aptX® and the
aptX symbol are trademarks of CSR plc or associated companies and may be
protected in multiple countries.
The “N-Mark” symbol is a trademark or registered trademark of NFC Forum, Inc.
in the USA and other countries.
Original packaging
If you wish to exercise your right of return, we ask that you be absolutely
sure to hold on to the packaging.
We can only accept the return of the speakers WITH THE ORIGINAL PACKAGING.
Empty boxes are not available!
Complaints
In case of a complaint, we will need the following information to process your
enquiry:
-
Invoice number
Can be found on the sales slip (enclosed with the product) or on the order confirmation received as a PDF document, e.g. 4322543 -
Serial number or batch number
Located on the bottom of the device, e.g. serial no.: KB20240129A-123.
Thank you for your support!
Contact
Please contact our customer service with any questions, suggestions or
criticism:
Lautsprecher Teufel GmbH
BIKINI Berlin
Budapester Str. 44
10787 Berlin (Germany)
Phone 00800 – 200 300 40 (toll-free)
Fax: +49 (0)30 / 300 930 930
Service: www.teufelaudio.com/service
Contact: www.teufelaudio.com/contact
Proper use
The speaker is designed for the playback of music and speech from the
integrated FM radio or an external player.
Only use the speaker as described in this user manual. Any other use will be
deemed as not in accordance with the instructions and may lead to damage of
property or even persons. The manufacturer accepts no liability for damage
caused by improper use. The speaker is only intended for private use.
Before operating the speakers, please read the safety notes and user manual
carefully.
Only in this way can you ensure that all functions are used in a safe and
reliable manner. Store the user manual in a safe place and also be sure to
pass it on to any subsequent owner.
Explanation of symbols
|
Protection class II
---|---
Dual insulation
For Your Safety
Caution items
You can find the following caution items in this user manual:
WARNING
This signal term indicates a moderate risk, which, if not avoided, may result
in death or severe injury.
CAUTION
This signal term indicates a low risk, which, if not avoided, may result in
minor or moderate injury.
NOTICE
This signal term warns you of potential damage to property.
Safety notes
Improper electrical installation or excessive mains voltage may result in an
electrical shock.
-
The device is suitable for a mains voltage of 230 V, 50 Hz. When connecting the device, make sure that the correct voltage is present.
You can find more information about this on the rating plate. -
Check the device regularly for damage. Immediately disconnect the mains plug and do not operate the device if its housing or mains cord is defective or exhibits other visible damages.
-
If the mains cord is damaged, replace it with an equivalent one.
-
The rechargeable battery switch (14) on the back side of the device does not disconnect the device from the mains. The complete separation from the mains can only be carried out by pulling the plug. Thus, make sure that the mains plug is always easily accessible.
-
If the device emits smoke, smells burnt or produces unusual sounds, immediately disconnect it from the mains and do not operate it further.
-
Never open the device housing. Repairs may only be carried out by an authorised specialist workshop. In the process, only parts that correspond to the original device data may be used.
-
Only use the accessory products specified by the manufacturer.
-
Only use the device indoors when it is plugged into the mains.
-
Do not operate the device in wet rooms and protect it from dripping and splashing water. Make sure that no vases or other liquidfilled containers are located on or earby the device in order to prevent liquid from penetrating the housing. If water or other debris ends up penetrating the housing, immediately pull the mains plug
and take out any batteries/ rechargeable batteries. Then send the device to our service address. -
Never modify the device. Unauthorised interventions may affect the safety and functionality.
-
Never touch the mains plug with wet hands.
An unsuitable setup location may result in injury and damage.
-
If the speaker is not securely mounted, do not use it in vehicles, in unstable locations, on wobbly tripods or furniture, on undersized brackets etc. The speaker may tip or
fall over and cause injury to persons or be damaged itself. \ -
Place the speaker in such a way that it cannot be knocked over inadvertently and make sure that the cables do not pose a trip hazard.
-
Do not place the speaker near heat sources (e.g. heaters, ovens, other heat generating equipment such as amplifiers etc.).
-
Do not use the device in environments where there is a risk of explosion.
-
Only use the Bluetooth ® function in locations where wireless radio transmission is allowed.
Children can become trapped in the package wrapping when playing and suffocate.
- Do not allow children to play with the device or the package wrapping. Danger of suffocation.
- Ensure that children do not remove small parts from the device or take them off of the device (e.g. control knobs or plug adapters). They could swallow the parts and choke.
- Never allow children to operate electrical devices unsupervised.
Leaking battery acid may lead to chemical burns.
- Do not allow battery acid to come into contact with skin, eyes or mucus membranes. In the event of contact with acid, immediately flush the applicable areas with plenty of clean water and consult a physician if necessary.
Batteries (particularly lithium batteries) can explode if used improperly.
- Never attempt to recharge batteries.
- Only use batteries of the same or equivalent type.
- You must not heat or short circuit batteries and rechargeable batteries or dispose of them in afire.
- Do not expose batteries and rechargeable batteries to direct sunlight.
Extended listening at high volumes may lead to hearing loss. To avoid damage to health, avoid extended listening at high volumes.
- When the volume is set high, always keep a certain distance from the device and never place your ear directly on the speaker.
- If a speaker is set to full volume, this may produce very high sound pressure. This may have psychological consequences and also cause physical injury. Children and pets are particularly at risk. Set your signal source device volume control to a low setting beforeturning on the power.
Misuse can lead to accidents.
- Do not use the carrying strap as a climbing aid.
Overview
Unpacking
WARNING
Children can become trapped in the package wrapping when playing and
suffocate.
– Do not allow children to play with the device or the package wrapping.
Danger of suffocation.
Carefully open the box and carefully lift the BOOMSTER XL with the EPE foam
parts out without touching the diaphragms of the bass speaker on the bottom of
the device.
Product contents
-
1x BOOMSTER XL including Li-ion rechargeable battery 1x mains cord (not shown)
-
1x carrying strap
Optional accessories -
Remote control “Teufel Puck”
Checking the product contents
- Check that all items have been delivered and that nothing is damaged.
- If the delivery is incomplete or exhibits transport damages, please contact our service team (see page 4).
CAUTION
Do not operate the device if it is damaged in any way.
Operational Controls and Connections
-
BT: Tap BT to select Bluetooth ® as a source
Press and hold BT for pairing mode -
AUX: Select the AUX (16) input
-
TREBLE: Set TREBLE
-
BASS: Set BASS
-
–/+: Reduce (–)/increase (+) the volume, treble, bass
-
Tap : Turn the device on/off
Press and hold : Activate/deactivate the LED sequential light -
FM: Select FM radio/set stations
-
1, 2, 3: Memory buttons for radio stations and sound configurations
-
NFC contact zone
-
Volume LEDs to display the volume, bass and treble
-
Battery/rechargeable battery compartment
-
Rechargeable battery connector jack
-
Mains jack
-
Rechargeable battery switch
-
Input jack for external mains adapter, e.g. car adapter (not included in the product contents)
-
AUX input jack
-
USB jack (power supply for external players)
-
Dipole FM antenna
-
Preparation
Power supply
The BOOMSTER XL offers four power supply options:
- Mains current
- Rechargeable battery
- Batteries (C cell)
- External 12 volt source
AC power
For stationary operation, insert the enclosed mains cord into the mains jack
(13) and connect it to a mains socket.
Battery pack
The enclosed Li-ion battery pack will be charged as soon as the BOOMSTER XL is
connected to the mains and the rechargeable battery switch (14) is switched on
(“I” position).
Before first use, charge the rechargea- ble battery for approx. 3.5 hours.
During the charging process, the ** button (6) will flash. It will stop
flashing once the rechargeable battery has been fully charged.
NOTICE
A deep discharge irreparably damages the rechargeable battery.
– Charge the rechargeable battery as soon as the LED display (10) blinks 3
times every 5 seconds.
To protect the rechargeable battery, the
BOOMSTER XL has deep discharge protection, which switches the device off once
the threshold has been reached.
** When the rechargeable battery charge diminishes or the batteries get
low, the LED display (10) will blink 3 times every 5 seconds.
In this case, replace the batteries or connect the mains cord.
Batteries
CAUTION
Batteries (particularly lithium batteries) can explode if used improperly.
– Never attempt to recharge batteries.
– Only use batteries of the same or equivalent type.
– You must not heat or short circuit batteries and rechargeable batteries or
dispose of them in a fire.
– Do not expose batteries and rechargeable batteries to direct sunlight.
Leaking battery acid may lead to chemical burns.
– Do not allow battery acid to come into contact with skin, eyes or mucous
membranes.
In the event of contact with acid, immediately flush the applicable areas with
plenty of clean water and consult a physician if necessary. Instead of using
the enclosed rechargeable battery, the BOOMSTER XL can also be operated using
batteries of type C (baby cell).
For this, proceed as follows:
- Open the battery compartment by turning the two screws on the cover counterclockwise (e.g. using a coin).
- Remove the rechargeable battery and carefully pull the plug of the rechargeable battery out of the jack.
- Insert 8 batteries into the battery compartment. When inserting the batteries into the compartment, make sure that the polarity is correct.
- Close the battery compartment and tighten the screws.
External 12 volt source
You can connect an external 12 volt source (e.g. a car battery) to jack (15).
The rechargeable battery will not be charged via this connection.
Attaching the carrying strap
Hook the strap ③ in the brackets (a).
CAUTION
– Do not use the carrying strap as a climbing aid.
Setup
- Select a stable, level base.
- Make sure that the environment is clean and free from dust.
- Select a location away from heat sources and direct sunlight.
- Do not place any heavy objects on the cables or the device.
Operation
CAUTION
Extended listening at high volumes may lead to hearing loss.
– To avoid damage to health, avoid extended listening at high volumes.
– When the volume is set high, always keep a certain distance from the device
and never place your ear directlyon the speaker.
– If a speaker is set to full volume, this may produce very high sound
pressure.This may have psychological consequences and also cause physical
injury.
Children and pets are particularly at risk. Set your signal source device
volume control to a low setting before turning on the power.
NOTICE
If the device is subjected to warm temperatures after being cold (e.g. after
transport), condensation may occur inside of it.
– In this case, wait at least 2 hours before you connect and activate it.
Turning on and off Turning on
-
Push the **** button (6) for approx. one second to turn on the BOOMSTER XL.
When the device is turned on, all of the LEDs will light up. -
If you would like to turn off all of the LEDs, press and hold the ****button (6) until the button-LED begins to blink. Turning them back on is done in the same manner.
Turning off
-
Push the **** button (6) again to switch the BOOMSTER XL off. The BOOMSTER XL will be
– off when using battery power,
– in standby mode when plugged in. -
In case of prolonged non-use, turn the rechargeable battery switch (14) off. This will completely disconnect the rechargeable battery from the mains thus preventing a
deep discharge. Auto-off -
The device will automatically deactivate if no input signal is received for 20 minutes. Sequential light
-
Every time the device is turned on and off, the volume LEDs will run for 5 seconds (“Knight Rider mode“).
-
Pushing and holding the button ****(6) (for approx. 3 seconds) will switch the LED running lights onand off.
 Selecting a source
- With the buttons (1), (2) and (7), select the external player (source) or radio operation.
The active source or the selected FM station as well as the preset EQ mode will be shown by the corresponding LEDs NOT lighting up.
You can find further details in the following chapters.
- With the buttons (1), (2) and (7), select the external player (source) or radio operation.
Volume
Setting the master volume
- With the –/+ buttons (5), you can increase or decrease the volume in 32 steps. When changing the volume, the buttons –/+ (5) will illuminate and the current volume level will be indicated by the volume LEDs (10).
Press the button briefly to change the volume gradually. Pressing and holding the button will change the volume continuously.
When the system is muted (lowest volume), all volume LEDs will blink.
Tone Setting the bass tones (subwoofer)
- Press the BASS button (4), to adjust the bass tones of the subwoofer to your listening pleasure. The current setting is indicated by the volume LEDs (10).
- As long as the BASS button (4) is lit, you can use the –/+ buttons (5) to change the volume of the subwoofer in 14 stages.
- To exit setup mode, you can press the BASS button (4) again. Otherwise, the mode will automatically end after approx. 5 seconds of key inactivity.
Setting the treble tones
- Press the TREBLE button (3), to adjust the higher tones to your listening pleasure. The current setting is indicated by the volume LEDs (10).
- As long as the TREBLE button (3) is illuminated, you can change the treble tones to 14 different levels using the –/+ buttons (5).
- To exit setup mode, you can press the TREBLE button (3) again. Otherwise, the mode will automatically end after approx. 5 seconds of key inactivity.
Preset sound configuration
There are 3 factory presets already stored. For BT or AUX mode, you can simply
press the corresponding memory button (8).
Memory button 1 – Neutral: bass and trebel in a neutral position. This
setting is suitable for most uses.
Memory button 2 – Loudness: the loudness setting is optimized for use in
enclosed spaces. The bass and treble are raised to create a powerful sound,
even with low and medium volume.
Memory button 3 – Outdoor: the outdoor setting is optimized for use
outdoors, without wall reflections.
Here, the high tones are raised and the low notes slightly lowered to
compensate for ambient noise and prolong the battery life.
The presets can always be customized and saved to your personal taste (see
next section).
Saving personal sound configurations
In BT/AUX mode you can save 3 sound configurations using the memory buttons
(8).
-
Adjust the tones as described above.
-
Press and hold the desired memory button until the buttons TREBLE (3), BASS (4) and the respective memory button flash three times.
Now the sound configuration is saved. -
You can access the saved tone configurations by pushing the corresponding memory button (8) in BT or AUX mode.
**** Access is not possible in radio mode (FM) because the memory buttons act as station buttons here.
In this case, briefly switch to another source (e.g. AUX), access the tone configuration there and switch back to FM.
Radio
The BOOMSTER XL is equipped with an FM radio. Three memory slots are available
for your favourite stations.
The integrated dipole FM antenna ensures good reception.
Selecting the radio
- Open the antenna compartment and unwind the dipole FM antenna (18). If applicable, adjust its position for better reception later.
- Briefly push the FM button (7) to select the radio.
The FM button LED is switched off now.
Setting stations
- Tap the FM button (7) again to scan for the next radio station and set it.
If necessary, push the FM button (7) again until you have found the desired station.
Saving and accessing stations
-
If you would like to save the set station, push and hold one of the memory buttons (8) for approx. 3 seconds.
The memory button and FM button (7) will flash three times. The station has now been saved to this memory button. -
You can access the saved stations by briefly pushing the corresponding memory button.
 AUX
Connection
The AUX IN (16) jack serves to connect an external player using a stereo cable with a 3.5 mm jack plug.
You can connect any external players with a line-out jack or earphone jack.
Playback-
Push the AUX button (2) to select the AUX input.
The button will illuminate. -
Start playback on your external player.
**** The volume setting of the external player affects the volume of the BOOMSTER XL. The sound can be set exclusively to your BOOMSTER XL. -
Use your external player to control all other playback functions.
-
Bluetooth ®
Via Bluetooth ® , you can establish a wireless connection between a compatible
external player and the BOOMSTER XL. The audio output of your external player
is then emitted by the BOOMSTER XL.
NOTICE
Only use the Bluetooth ® function in locations where wireless radio
transmission is allowed. Please keep in mind that the Bluetooth ® and NFC
behaviour may differ depending on the external player’s operating system.
Bluetooth ® options
Depending on the device type, your external player/smartphone may also have
a number of Bluetooth ® options such as media playback and call function. Here
you can ctivate and deactivate the options according to your wishes.
You can find more information about the Bluetooth ® options in the user manual
for your external player/ smartphone.
Pairing
To play the audio of your external player on your Boomster via Bluetooth ® ,
you must first connect the devices with each other. The technical term for
this is “pairing”. The
Boomster XL provides manual and automatic pairing via NFC. Manual pairing
- Turn on the Bluetooth ® function on your external player (e.g. smartphone).
- Press the BT (1) button and hold it down for approximately 3 seconds. When the BT button LED blinks, the external player can be linked.
- Let your external player/ smartphone scan for Bluetooth ® devices. You will find more information about this in the usermanual of your external player. “BOOMSTER XL” should also appear in the list of detected devices following the scan.
- Select “BOOMSTER XL” from the list of detected devices.
Pairing is now complete and your BOOMSTER XL will now act as a Bluetooth ® playback device. The
BOOMSTER XL will now play back all sounds that would otherwise be played by your external player/ smartphone.
** When BT is set as the active source and a Bluetooth ®
– connection is available, the BT button LED will be off (all other LEDS will
be on). Pairing via NFC
** NFC (Near Field Communication) is a transmission standard for the wireless
exchange of data over short distances. Your BOOMSTER XL can create a
connection to a compatible external player via NFC.
-
Turn on the NFC function on your external player (Bluetooth ® does not have to be turned on for theexternal player).
-
Hold your external player close to the NFC contact zone on the rear side of the BOOMSTER XL.
If FM or AUX is selected as the source, the BOOMSTER XL will automatically switch to Bluetooth ® mode. After a short time, you will be asked to allow the NFC connection. -
Confirm the request on your external player.
Pairing is now complete and your BOOMSTER XL will now act as a Bluetooth ® playback device. The BOOMSTER XL will now play back all sounds that would otherwise be played by your external player/ smartphone.
Playback
**** The volume setting of the source device also has an impact on the volume
of the BOOMSTER XL. The sound can be set exclusively to your BOOMSTER XL .
- After starting playback on your source device, you can control the other playback functions from here as well.
Terminating the connection To terminate the Bluetooth ® connection,
– deactivate the Bluetooth ® function on your external player/ smartphone.
– or push and hold the BT button (1) for approx. 3 seconds, which will cause
the pairing to be terminated. USB The USB connector (17) is used to supply
power and recharge the source devices such as smartphones, tablets or MP3
players. Charging with the
BOOMSTER XL however, can take longer than with the appropriate power adapter.
NOTICE
Please note that charging a device may reduce the rechargeable battery life of
your BOOMSTER XL.
Remote Control
You can use the “Teufel Puck” remote control as an optional accessory.
Available in our webshop.
Pairing the “Teufel Puck”
- Switch the BOOMSTER XL on.
- Position the “Teufel Puck” at a distance of no more than 25 cm to the BOOMSTER XL.
- Hold the button (20) down until the LED ring (22) starts to blink. Then release the button.
– Blinks three times: Pairing was successful.
– Blinks ten times: Pairing failed and must be repeated.
Functions
– Activating and deactivating the BOOMSTER XL or “Teufel Puck”: Push the
**T** (21) for approx. 3 seconds.
Tapping the **T**is sufficient to switch on from standby (only works in
mains mode, not in battery mode).
– Selecting a source: Push the button (20) repeatedly.
– Adjusting the volume: Turn the cover (21).
– Mute: Tap the **T** (21). Changing the batteries
The remote control is powered by 2 type AAA batteries. Simply pull off the
cover to open the battery compartment.
NOTICE
When inserting the batteries, make sure that the polarity is correct.
** CAUTION
Batteries (particularly lithium batteries) can explode if used improperly.
– Never attempt to recharge batteries.
– Only use batteries of the same or equivalent type.
– Do not heat, short circuit batteries and rechargeable batteries, dispose of
them in a fire or expose them to direct sunlight.
Leaking battery acid may lead to chemical burns.**
– Do not allow battery acid to come into contact with skin, eyes or mucous
membranes.
In the event of contact with acid, immediately flush the applicable areas with
plenty of clean water and consult a physician if necessary.
Cleaning & Maintenance
NOTICE
External influences may damage or destroy the device.
– If the device is to be left unattended for a prolonged period of time (e.g.
during a vacation) or if a thunderstorm is forecast, pull the mains plug out
of the socket. Otherwise, sudden overvoltage could damage or destroy the
device.
– In the event of a prolonged absence, remove the batteries from the device.
Leaking batteries may damage the device.
– If possible, only use plain water without any additives. In case of stubborn
marks, a mild soap solution may be used.
– Do not use caustic cleaning products, white spirit, thinners, petrol or
similar under any circumstances.
Such cleaning agents may damage the delicate surface of the housing.
- Ideally, you should remove dust or small amounts of dirt with a dry, smooth microfiber cloth.
- Use a damp cloth to rub off stubborn dirt. Make sure that no liquid penetrates the housing.
- Then immediately wipe the damp surfaces off with a soft cloth without applying pressure.
Troubleshooting
The following advice should help you to solve problems. If this does not help, you will find useful information in the detailed FAQs on our website. Otherwise, please contact our hotline (see page 4). Take note of the warranty instructions.
| Problem | Possible cause | Solution |
|---|---|---|
| The BOOMSTERXL doesn’t emit sound. | No power supply. | Check the function of |
the socket with another device.
Charge the rechargeable battery and/or change the batteries.
No sound.| The wrong source has been selected.| Select the correct source (see
“Selecting a source” on page 15).
The volume has been set too low.| Increase the volume.
The volume of the external player has been set too low.| Carefully increase
the volume of the external player.
No sound in Bluetooth® mode.| No Bluetooth® connection.| Establish a
connection (see “Pairing” on page 20).
BOOMSTER XL has not been selected as the output device.| On the external
player, select “BOOMSTER XL” as the Bluetooth® output device.
Bluetooth® connection impaired by another radio system (e.g. cordless
telephone, Wi-Fi).| Set up the BOOMSTER XL and/or external player in another
location. Move to another room to test.
Playback is noisy.| Generally speaking, the BOOMSTER XL is a very low- noise
system. It has a very high resolution in the high range area and therefore can
expose the poor quality of a signal source (e.g. from MP3 files).| Make sure
that the external player emits a clear signal to the BOOMSTER XL.
Technical Data
Dimensions (WxHxD): 510 x 257 x 210 mm
Weight: 9.85 kg
Mains connection: 230 V~; 50/60 Hz; 150 W
Rechargeable battery: 11.1 V Li-ion; 8 Ah
Batteries: 8×, type C (not included in the product contents)
You can find further technical data on our website. Technical changes
reserved!
Declaration of Conformity
** Lautsprecher Teufel GmbH declares that this product complies with
Directive 2014/53/EU. The full text of the EU Declaration of Conformity can be
found at this web address: www.teufel.de/konformitaetserklaerungen
www.teufelaudio.com/declaration-of-conformity
The following radio frequency bands and radio transmitters are used in this
product:**
| Radio network | Frequency bands in Mhz | Transmitter power mW/dBm |
|---|---|---|
| Bluetooth ® | 2400–2483.5 | 2.5/4 |
| Nordic | 2400–2483.5 | 2.5/4 |
| NFC | 13.56 |
Disposal
Important information in accordance with the Electrical and Electronic
Equipment Act (Germany: ElektroG)
We advise owners of electrical and electronic appliances that old electrical
and electronic devices must be handed in separately from municipal waste, in
accordance with the applicable regulations. Batteries and rechargeable
batteries that are not firmly enclosed in old electrical devices and lamps,
and that can be removed from the old device without destroying them, must be
separated from them in a non-destructive manner before they are handed to the
collection point for their intended disposal. Please take note of our
information on the Batteries Act [Germany: BattG] below for disposing of
batteries. You make an important contribution to returning, recycling and
further processing of old devices if you separate your old devices into the
correct collection groups for recycling. The symbol below of a crossed-out
dustbin, applied to electrical and electronic appliances, also advises of the
duty to separate collections:
Consumer electronics stores and supermarkets are obliged, under certain
conditions, to take back old electrical and electronic devices, in accordance
with section 17 of the Electrical and Electronic Equipment Act. Stationary
retailers must take back an old electrical device of the same type when a new
electrical device is bought (1:1 return). This also applies to home
deliveries. These retailers must also take back up to three small old
electrical devices (≤ 25cm) without this being linked to a new purchase (0:1
return). In accordance with the Electrical and Electronic Equipment Act, as
online retailers of electrical devices and due to our product range, our
obligation is limited to 1:1 return of large devices of > 50 cm when selling a
new electrical or electronic device of the same type. We comply with the
obligation of return of devices other than large devices through our service
provider. You can find the exact contact data and collection points on our
website www.Teufel.de/entsorgung. It is
also possible to return old electrical and electronic appliances free of
charge at an official delivery point run by the public waste disposal
authorities.
Important: For safety reasons we ask that you refrain from sending
lighting fixtures (some lamps). For return of lighting fixtures please use the
public waste disposal ollection points or contact us directly at
www.Teufel.de/entsorgung.
As an end-user, you are responsible for deleting any personal data on old
electrical appliances before handing it in.
Important: Our appliances can contain batteries/rechargeable batteries. If
this is the case, please refer to its attached product documentation for
additional information on the type and chemical make-up of the battery. For
products with battery compartments you can directly remove the batteries or
rechargeable batteries and dispose of them properly. If the batteries are
built in to the product, do not in any case attempt to remove the batteries
yourself, instead contact one of our employees or appropriate specialist
staff.
Important information about the Batteries Act (Germany: BattG) Batteries
and rechargeable batteries must not be disposed on in household waste.
Old batteries can contain toxic substances that could damage the environment
or your health if not stored or disposed of properly. This applies especially
to improper handling of batteries containing lithium. However, batteries also
contain important rawmaterials such as iron, zinc, manganese and nickel and
these can be reused.
Separate collection enables recycling of these raw materials and avoids any
negative impact on the environment or human health due to toxic substances
being released.
The crossed-out dustbin symbol means that you should not dispose of old
batteries and rechargeable batteries in household waste. In addition, you, as
the end-user, are
legally obliged to return old batteries.
You can hand in batteries and rechargeable batteries free of charge at an
official return point such as any public waste disposal collection point. You
can also hand in old batteries, that we stock or have stocked as new
batteries, at one of our Teufel stores or at one of our dispatch warehouses.
However, if you send them to our dispatch warehouses we would like to point
out the dangerous goods regulations of the dispatch provider you opt for and
ask you not send batteries to us by post. You can get the addresses of our
dispatch warehouses from our customer service.
Due to existing legal regulations, the battery manufacturer must use the
following symbols with the following meanings when marking the batteries. Hg:
the battery contains more than 0.0005 mass percent of mercury Pb: the battery
contains more than 0.004 mass percent of lead
Cd: the battery contains more than 0.002 mass percent of cadmium Otherwise, to
avoid waste and littering, batteries with a long service life or rechargeable
batteries should be used. Exchangeable rechargeable bat- teries enable long
service for electrical and electronic appliances and thus devices and
rechargeable batteries can be prepared for recycling (e.g.
regenerating/exchanging rechargeable batteries).
Further information on preventing waste for consumers can, however, be found
in the Federal waste prevention programme with the participation of the
Federal states.
Please contact our customer service department with any questions,
suggestions, or complaints: Lautsprecher Teufel GmbH
BIKINI Berlin, Budapester Straße 44 10787 Berlin (Germany)
www.teufelaudio.com
Phone: 00800 200 300 40 (toll-free)
Fax: +49 (0)30 – 300 930 930
Online-support:
www.teufelaudio.com/service
Contact: www.teufelaudio.com/contact
No responsibility is assumed for the correctness of this information.
Technical changes, typographical errors and other errors reserved.
Manual No. 199926_20220126_EN_V3.1
References
- Entsorgung | Teufel
- Konformitätserklärungen | Teufel
- Teufel: Speakers & Headphones Direct from the Manufacturer Online
- Declaration of conformity | Teufel
- Support | Teufel
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>