OLIGHT Marauder Mini LED Flashlight User Manual
- June 8, 2024
- OLIGHT
Table of Contents
OLIGHT Marauder Mini LED Flashlight
DANGER
- Don’t leave the battery near the fire or a heated source, or throw the battery into the fire.
- Don’t short circuit (+) and (-) terminals with metallic object intentionally.
- Don’t step on the battery and throw or drop the battery on the hard floor to avoid mechanical shock.
WARNING
- Don’t use damaged, deformed battery, or with broken sleeve.
- Keep the battery away from babies and children.
- Keep the light locked out when carrying or transporting to prevent burning accidents caused by abnormal startup.
CAUTION
-
Do not look directly at the light source or shine on the eyes, it may cause
temporary blindness or permanent damage to the eyes. -
Do not block the light outlet at close range, the energy emitted from the light may cause the object to burn.
-
Do not charge the light with any other non-specified chargers.
-
Don’t leave the light in a car where inside of temperature may be over 60°C, or in similar places.
-
Do not touch the hot surface place, it may cause skin burns.
-
Use dedicated charger.
-
Dedicated battery, do not take it out for charging
NOTICE
- Do not put a hot light into any type of fabric bag or fusible plastic container.
- Do not activate the maximum brightness mode multiple times continuously to prevent the high temperature on the surface.
- When the light gets hot, please switch it to low brightness mode, or shut off the flashlight temporarily.
- Active thermal management: The built-in thermistor monitors the temperature of the light in real time and suppresses overheating by reducing the output.
- Do not put it in the mouth or lick it, leakage of the charging port can cause discomfort.
- Do not disassemble the product.
- Do not immerse the flashlight in seawater or other corrosive media as it will damage the product.
- For long-term storage, please remove the battery.
- The switch is a magnetically sensitive component. Any proximity to a strong magnet may affect its function.
REMARK
- A USB adapter with 10W(5v2A) or above is recommended. Otherwise, the charging time will be longer.
- Keep the charging port clean and dry.
- The light adopts PWM regulation, keep away from the radio, it may cause noise.
- It is normal that the light flickers when the battery is close to running out.
- Operating time in Turbo or high mode varies with ambient temperature and heat dissipation conditions, better heat dissipation longer runtime.
- When the battery is at low voltage, the high mode is restricted.
EXCLUSION CLAUSE
Olight is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual, including but not limited to using the product inconsistent with the recommended lockout mode.
Dongguan Olight E-Commerce Technology Co., Ltd
4th Floor, Building 4, Kagu Industrial Park, No 6 Zhong nan Road,
Chandan Town, Dongguan City, Guangdong, China.
Made in China
