Pocket Tunes Instant Speaker: PT200 User Guide & Manual
- June 4, 2024
- pockettunes
Table of Contents
The Pocket Tunes Instant Speaker PT200 is a portable and powerful speaker that allows you to enjoy your favorite tunes on-the-go. This user guide and manual provides detailed instructions on how to use the device, including its key features and functions. The device features a bone conduction speaker, Bluetooth® connection, True Wireless Stereo (TWS) technology, FM function, and USB-C® charging port. The guide explains how to connect the speaker to your smartphone or tablet via Bluetooth®, search for FM channels, and play music on two PocketTunes speakers simultaneously using TWS technology. It also provides tips on how to optimize the sound output by mounting the speaker on thinner and larger surfaces. The guide includes specifications, accessories, and FCC caution information. With this user guide and manual, you can easily set up and operate your Pocket Tunes Instant Speaker PT200 for an immersive audio experience.
pockettunes PT200 Instant Speaker
Device Overview
Function key
- Microphone
- Power button/FM
- USB-C® charging port
- LED indicator
- Lanyard loop
- Bone conduction speaker
Bluetooth® Connection
- Press and hold the power key until you hear the voice indicate “Bluetooth® Setup”.
- On your smartphone or tablet, search for the Bluetooth® device named “PocketTuneslnstant” and tap to connect.
- Once connected, place your instant speaker on the surface of any hollow object and play your favorite tunes.
- Press the Function key once to decrease volume; press twice to increase volume.
True Wireless Stereo (TWS) These speakers feature TWS {True Wireless Stereo) technology, which allows you to play music on your two PocketTunes speakers simultaneously, creating a more powerful surround sound experience. Turn on both speakers at the same time. After 3-5 seconds, the speakers will pair to each other automatically and you will be able to play music as usual.
FM Function
- Press the Power button to switch from Bluetooth® mode to FM mode.
- Press and hold the Function key to search FM channels automatically.
- Once searching is complete, triple click the Function key to switch between radio stations.
Note: The USB cable doubles as an FM antenna, so you may plug it in for increased reception. For optimal results, use the FM function outdoors. Charging Plug the included charging cable into the charging port, and plug the other end into a wall charger (not included). LED Status
- Steady- Charging
- Flashing – 8/uetooth® Mode
- Steady- Connected
Thinner, larger surfaces result In louder sound output. Note:
- Remove the magic sticker film before mounting the speaker. , Clean surface before mounting the speaker.
- If the magic sticker loses its stickiness, dampen it with a wet cloth to remove dust or dirt. Avoid wetting the speaker itself. , Suction cup works best on glass surfaces.
- Playing on max volume for long periods of time may cause the speaker to get hot.
Specifications
- Output Power: 3W
- Battery: Lithium battery 3.7V 400mAh Battery Standby: Over 220 hours
- Charging port: USB-C11
- Accessories: 2 Instant Speakers, 2 Charging Cables, 2 Lanyards, 2 Magic Stickers, 2 Suction Cups, Quick Start Guide and Warranty Card
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. The Bluetooth® trademarks-including the BLUETOOTH word mark, the figure mark (the runic “B# and oval design), and the combination mark (Bluetooth word mark and design)-are owned by the Bluetooth SIG. TikTok® is a registered trademark belonging to Bytedance Ltd. USB is used to solely describe the compatibility of our technology and in no way is intended to infringe on any intellectual property rights of any respective protected marks. @ 2231KIFCCID:2AVRVPT200
SPECIFICATIONS
| Output Power | 3W |
|---|---|
| Battery | Lithium battery 3.7V 400mAh Battery Standby: Over 220 hours |
| Charging port | USB-C® |
| Accessories | 2 Instant Speakers, 2 Charging Cables, 2 Lanyards, 2 Magic |
Stickers, 2 Suction Cups, Quick Start Guide and Warranty Card
FCC Caution| This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
FAQS
What is the Pocket Tunes Instant Speaker PT200?
The Pocket Tunes Instant Speaker PT200 is a portable and powerful speaker that allows you to enjoy your favorite tunes on-the-go.
What are the key features of the Pocket Tunes Instant Speaker PT200?
The Pocket Tunes Instant Speaker PT200 features a bone conduction speaker, Bluetooth® connection, True Wireless Stereo (TWS) technology, FM function, and USB-C® charging port.
How do I connect the Pocket Tunes Instant Speaker PT200 to my smartphone or tablet via Bluetooth®?
Press and hold the power key until you hear the voice indicate “Bluetooth® Setup”. On your smartphone or tablet, search for the Bluetooth® device named “PocketTuneslnstant” and tap to connect.
How do I play music on two PocketTunes speakers simultaneously using TWS technology?
Turn on both speakers at the same time. After 3-5 seconds, the speakers will pair to each other automatically and you will be able to play music as usual.
How do I search for FM channels on the Pocket Tunes Instant Speaker PT200?
Press and hold the Function key to search FM channels automatically. Once searching is complete, triple click the Function key to switch between radio stations.
What is the LED status of the Pocket Tunes Instant Speaker PT200?
Steady- Charging; Flashing – Bluetooth® Mode; Steady- Connected.
What surfaces result in louder sound output when using the Pocket Tunes Instant Speaker PT200?
Thinner, larger surfaces result in louder sound output.
What accessories come with the Pocket Tunes Instant Speaker PT200?
The accessories that come with the Pocket Tunes Instant Speaker PT200 include 2 Instant Speakers, 2 Charging Cables, 2 Lanyards, 2 Magic Stickers, 2 Suction Cups, Quick Start Guide and Warranty Card.
What is the FCC caution information for the Pocket Tunes Instant Speaker PT200?
The Pocket Tunes Instant Speaker PT200 complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.