ELMARK 98SOL100 Series LED Solar LED Street Light with Sensor Installation Guide

INSTALLATION INSTRUCTION OUTDOOR
SOLAR LED STREET LIGHTS WITH SENSOR
www.elmarkholding.eu

98SOL100 Series LED Solar LED Street Light with Sensor

Catalogue No| Watt (W)| Whole fixture lumens (lm)| Colour temp. (K)| Solar panel (Wp)| Battery (V/mAh)| Length (mm)| Height (mm)| Width (mm)
---|---|---|---|---|---|---|---|---
98SOL103| 30| 360| 6800-7200| 5V/7W| 3.2V/5000mAh| 207| 384| 57
98SOL104| 60| 720| 6800-7200| 5V/11W| 3.2V/10000mAh| 235| 479| 57
98SOL105| 90| 1080| 6800-7200| 5V/14W| 3.2V/15000mAh| 256| 618| 57
98SOL106| 120| 1440| 6800-7200| 5V/18W| 3.2V/20000mAh| 256| 720| 57

Packing list

WALL MOUNTING ACCESSORIES
Diam.: 45mm
Catalogue number: 98POLE45

POLE MOUNTING ACCESSORIES
Diam.: 45mm
Catalogue number: 98POLE45P

Remote control function introduction

1. Convenemote control

Important note

1. Please do not arbitrarily change the circuit/circuit board.
2. Please pay attention to the installation and fixation of the lights, so as not to hurt people when the wind blows.
3. Please do not disassemble the lamp, so as not to affect the warranty.
4. In order not to affect the use effect of the lamps ，please clean up the dust and debris on the surface of the photovoltaic panel regularly.
5. Please check regularly whether the wire has fallen off or broken.
6. The solar lamps contain lithium batteries. Lithium batteries are recyclable items, so please do not throw them away.
7. The battery must be fully charged before it can be used for more than 12 hours.

Warm prompt

1. Solar lamps and lanterns rely on photovoltaic panels to absorb sunlight into electricity, energy storage to the battery! For solar ligths and lanterns work.

2. International test conditions of photovoltaic panels:
   AM1.5, 1000 w/m2/25 ℃
   AM1.5 is the actual distance light travels through the atmosphere 1.5 times the vertical thickness of the atmosphere.
   25℃ means charging at a temperature of 25℃.

3. 1000W/m2 is the radiation intensity of sunlight. Only when this intensity is reached can the photovoltaic panel reach the maximum input current, otherwise it will not  reach the maximum input current.

4. Autumn, winter and cloudy days, rainy days, the light intensity is relatively weak, charging effect will be clear, significantly weakened, so the lighting time will be shortened, with the solar water heater.

Product self-inspection
If the lamp cannot be used, please try:

1. Check whether the connection line is well connected or flooded.
2. Check whether the wires at the photovoltaic panels and light fall off.
3. If there is no problem with the above two points, please contact the local dealer. Method of use
   The lighting mode of this lamp is automatic mode:
   ⑴ When it’s dark, it lights up automatically. Daybreak, automatic lights off.

Product warranty
Thank you very much for purchasing our solar light. It is our obligation to provide you with quality products and service, and fully protect your consumer rights and interests.  Therefore, according to the relevant national regulations, our company implements the following warranty service terms:

1. Service commitment: All our solar lamps enjoy the service of “one-month replacement and one-year warranty”.

2. All exchange conditions: Since the date of purchase within a month, the inspection of our company is the quality of the product itself, unconditional replacement of the  same type of products, round-trip freight borne by our company. If there is no problem or man-made damage after testing, the round-trip freight shall be borne by the  customer, and the maintenance fee shall be charged.

3. Warranty Regulations: Since the date of purchase can enjoy a free warranty within a year back and forth freight borne by our company, such as the detected product no  problem or man-made damage, back and forth freight borne by the customer and charge maintenance costs.

4. The appearance of the product damage is not to say that the replacement policy.

5. Product accessories and gifts do not belong to the scope of replacement, warranty or repair.

6. Customers can enjoy after-sale service by presenting the warranty card and the purchase certificate.

7. In the following cases, the warranty will automatically expire, and the company will only provide
   maintenance services:

8. The warranty card or purchase voucher is lost, altered or dated.

9.  Due to natural disaster, artificial or improper operation and other non-product fault.

10. The product has been repaired, disassembled or modified by personnel not authorized by our company.

11. The appearance of the product is seriously damaged or cannot be identified.

12. Overrun the repair period.

The light fitting must only be mounted and put into operation by a qualified electrician! Make sure that you do not damage any electric cables when you are mounting the  light fitting. The colour codes of the wire are the following: black or brown (L) = phase conductor, blue (N) = neutral conductor, and in the case of a light fitting of shock  protection class 1: green-yellow =earting conductor. Only a light source of maximum performance and of the type indicated in the data plate and around the socket can be used for the product.

References

• Home - ELMARK Holding

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>