SURAIELEC URSW21A Wireless Wall Switch Remote User Manual
- June 8, 2024
- SURAIELEC
Table of Contents
SURAIELEC URSW21A Wireless Wall Switch Remote
Warning: To reduce the risk of fire, electric shock or personal injury, please strictly follow the instructions.
- Do not connect any devices that may exceed the performance limits of the outlets.
- For indoor use only.
- Do not disassemble or repair the product, but only by authorized service personnel.
- To prevent children from suffocation and chocking, keep them away from packing materials.
- Do not dispose any part of this product in a fire.
- Avoid exposure to high-temperature sources, direct sunlight, or exposure to moisture.
- If the remote is not in use for an extended period of time, remove battery.
- Any questions, please contact us firstly by E-mail:[email protected]
Product Layout
-
Plug the receiver into a powered wall outlet.
-
Remove the isolation tab in the battery compartment of the transmitter.
-
Press the ON or OFF bottom on the transmitter will turn on or off the corresponding accordingly.
Note:
The receiver will remain “OFF” after a power cut to save energy.
Transmitter installation
Handheld or wall mount
Reset an Outlet
To remove an outlet from all remote control pairings means that the outlet can’t be controlled by any transmitter.
-
Unplug the receiver from the wall outlet.
-
Press and hold the program button on the receiver.
-
Plug the receiver into the wall outlet again while continuing to hold the program button for approximately
5 seconds until the indicator light begins to flash. -
Program rest is successful when the indicator light stop blinking.
Programming
The transmitter and receiver outlet have been pre-paired for immediate use, if you want to customize the configuration to meet your needs, to program a transmitter and receiver, please follow the steps below:
-
Cancel the programming referring to the above “Reset an Outlet” section firstly.
-
Press and hold the programming button until the indicator light starts to blink.
-
Release program button, press ON or OFF button on the transmitter
-
Paring is successful when the indicator light stops blinking.
Suraielec Remote Series Product
To meet your different needs, Suraielec provides a series of remote products. All of these products can be paired with each other freely.
SKU: URKW11A URKW21A
Wireless Light and Receiver Kit
SKU: URSW11A URSW21A
Remote Control Outlet
SKU: URSW11B URSW21B
Remote Control Outlet
Specifications
- Power Supply: 120VAC/ 60Hz
- Max. Rating: 10A/ 1200W
- Remote Range: 100ft (Free Area)
- Frequency: 433.92MHz
- Battery: 12V 23A(included)
Package Includes
- Outlet Receiver x 1
- Remote Transmitter x 1
- Mount Screws x 1 set
- Instruction Manual x 1
One Year Limited Warranty
Suraielec warrants this product to be free from defects in material and
workmanship for a period of one year from the date of purchase.
Warranty is void if damage is caused by misuse or improper installation.
Email:[email protected]
Our dedicated customer service team will get back to you within 24 hours.
This device complies with part 15 of the FCC rules
CONFORMS TO UL STD 61058-1 AND 498A
CERTIFIED TO CSA STD.C 22.2 # 61058-1 AND 42