EBL MP330 Portable Power Station User Manual

EBL MP330 Portable Power Station

Feature Details

1. LCD Screen Display
2. DC 5521 Output
3. Car Charger Output
4. USB-C Output
5. USB-A Output
6. 330W Rated AC Output
7. Anti-collision Strip
8. DC Input
9. SOS Mode & LED light
10. Folding Handle
11. Wireless Charger
12. Air Intake Vent with Cooling Fan

MP330 Accessory List

BUTTON FEATURE

• A: MP330 Power ON/OFF Button
• B: SOS Mode & LED Light Button
• C: DC Output Power ON/OFF Button
• D: USB Output Power ON/OFF Button
• E: AC Output Power ON/OFF Button

Function Buttons

Button A: MP330 Power ON/OFF
Button A is the master switch. Press Button A to turn on the power or to shut down the output(s) when not in use.

Button B: SOS Mode & LED Light
Function is available no matter the Button “POWER ON/OFF “(Button A) is activated or not as the following steps: Firstly, press Button B to turn on the LED light into the LED light mode. Secondly, double click it to turn on the SOS mode. Thirdly, press Button B back to LED light mode, then press it again, the light will be turn off.

Button C: DC Output Power ON/OFF
Pls. make sure the button “POWER ON/OFF”(Button A) is activated before pressing Button C to turn on; Press Button C to shut down the output(s) when not in use.

Button D: USB Output Power ON/OFF
Pls. make sure the button “POWER ON/OFF”(Button A) is activated before pressing Button D to turn on; Press Button D to shut down the output(s) when not in use. The USB-C cable of different devices need different endorsements of corresponding protocols, if the USB-C port doesn’t work, try to use the AC adapter to charge.

Button E: AC Output Power ON/OFF
Pls. make sure the button “POWER ON/OFF”(Button A) is activated before pressing Button E to turn on; Press Button E to shut down the output(s) when not in use.

LCD FEATURES

Details Displayed on LCD

Battery Level Indicator:
The battery level is provided by percentage of battery charge corresponding to the number of bars and percentage displayed. The segments in the battery level correspond to the current state of charge, 1-20% one segment, 21-40% two segments, 41-60% three segments, 61-60% four segments, and all five are lit when charge level is above 81%. Provides the user live telemetry data on time to completely charge, or deplete the battery based upon the energy entering or leaving the battery. Highly recommend to fully charge MP330 when first use. Higher battery level indicator show, more precise the data will indicate. Please be aware that this value can adjust multiple times as the energy draw

General Specifications

a| Rated Capacity| 288.6Wh
a| Weight (Net Weight)| ==3.3kg
 | Weight (Including Accessories)| ==4.3kg
0| Product Size| 244171177mm

 | Recharging Input Voltage| 12-24V
G| Recharging Input Power| 60W
{!, <::J| AC/DC Adapter| 60W MAX, AC 100-240V (50Hz/60Hz), DC 15V, 4A
·8·

g

| Solar Charge Input| 12-24V, DC 5A MAX
 | Car Charger| DC 12V, 60W MAX

I[])| AC Output Voltage| 11OV±10%/60Hz
G| Rated Output Power| 330W
G| Output Waveform| Pure Sine Wave
0

g

| Overload Protection Power| 360±20W
‘| Car Charger Output| 12V/10A| ****

Total 10A

 | DC 5521 output*2| 12V/5A
((• •))| Wireless Charger| 5W
 | Usb Output| QC3.0/18W
T| Output Type-C| PD60W

 | Standard Capacity of Cells| 3.7V/78000mAh
1| Discharging Temperature| 14 to 113°F (-10 to 45°C)
1| Recharging Temperature| 32 to 104°F (0 to 40°C)

HOW TO CHARGE

AC Adapter Charging
It will take 6-7 hours to charge fully by using the AC adapter we provided

Solar Panel Charging

• DO NOT charge the unit via solar panel that operate voltage outside of DC12-24V.
• Place Solar Panels in direct sunlight as much as possible.
• Support 60W/80W/ 100W/120W Max Solar Panels (Not included), the charging time is determined by the solar light intensity.

12V Car Charger Charging
Use the Car Charger we provided to charge this unit. The full charge time takes 7-9 hours. When the LCD display shows the battery power of 100%, it indicates that this unit is fully charged.

Powering/Charging Devices with MP330
Select the type of outlet required by pressing the Output ON/OFF Button C/DIE. The output port will NOT function until the appropriate button is pressed to activate the port. When activated, the indicator on the button will illuminate green, indicating that the output(s) are active, and the LCD display will turn on and provide details on the charging output. The LCD Screen will automatically shut down when no outputs are activated.

WHAT  IT POWERS

Safety Instructions
Read the following instructions to ensure safety before using. Improper use may result in fire, property damage or personal injury.

Product Use:

• DO NOT use any inappropriate power cords.
• DO NOT place the unit close to or in a fire on expose it to heat. Keep out of direct sunlight.
• DO NOT charge, use or store the unit in a bathroom or in an area exposed to rain or moisture.
• DO NOT drop the unit into the water. If the battery in the unit comes into contact with water, it may cause chemical decomposition of the battery.
• This may cause the battery to catch fire or explode.
• NEVER use or charge swollen, leaky, or damaged batteries. If your battery is abnormal, contact us to get support
• NEVER install or remove a battery from the unit when it is turned on.
• DO NOT use the batteries in strong electrostatic or electromagnetic environments. Otherwise, the battery control board may malfunction and cause a serious accident.
• NEVER disassemble or pierce the product in any way. Otherwise, it may leak, catch on fire, or explode.
• DO NOT use the product if it was involved in a crash or a heavy bump.
• If the product falls into the water during use, take the product out immediately and put it in a safe and open area.
• Keep a safe distance from it until it is completely dry. NEVER use it again and dispose it properly as described in the Battery Disposal section below.
• If the product catches fire, it is recommended to use fire extinguishing equipment in the following order: water or water mist, sand, fire blanket, dry powder, carbon dioxide fire extinguisher.
• DO NOT allow pins, wires or other metal pieces to insert to the device case, outlets or controls. Metal pieces may short circuit the product.

Product Recharging

• DO NOT charge the unit via power supply systems that operate outside of AC100-240V.
• DO NOT charge the unit via solar panel that operate voltage outside of DC12-24V.
• DO NOT charge a product immediately after a long heavy load, because the product’s temperature may be too high.
• DO NOT charge a product until it cools to room temperature.
• Always use approved attachment charging cables. we take no responsi- bility for any damage caused by using another brand charging cable.
• When charging, please place the product on the ground with no flammable or combustible materials around. To prevent accidents, never leave the machine unattended during charging.
• Only charge, use the unit within an ambient temperature of 0 to 40°C (32-104°F). The ideal charging temperature range is 71°F to 820F(22°C to 28°C).

Cleaning

Please make sure that the device is disconnected from all input power and Output devices. Wipe with a clean, dry, non-soft cotton cloth. Removing any foreign objects, dirt or other obstructions on the vents on both sides. When cleaning foreign objects in the side vents, do not allow debris, dirt or other Blockage enters the equipment.

Storage

If it will be stored for more than 1 month, please charge it to 50% capacity and keep it indoors, at normal temperature, and the maximum storage time shall not exceed 6 months. Please keep away from direct sunlight (see the general specification section). Excessive temperature will lead to reduced service life, overheating and fire. Extremely cold conditions below the specified storage range can also impair the performance and service life of the equipment. Please keep away from corrosive chemicals and gases. After taking it out of storage, perform a visual inspection to ensure that the appearance of the equipment and all accessories are qualified. Checking the vents on the intake and exhaust sides to make sure they are free of foreign objects. Allowing the device to return to the environment before charging or other devices.

Attention: Transportation: The power station meets all legal requirements for the transportation of dangerous goods. The capacity of the lithium battery pack exceeds 100Wh. According to international standards Standard, if the power station is transported by air, it must be transported in accordance with IATA standard packaging. The instructions and labeling requirements of the International Air Transport Association and related declarations must be completed.

UL Note

A photovoltaic panel as input for charging the internal battery shall be provided with an inverter and/or a charge controller in accordance with UL1741 or UL 62109-1; The external power supply shall be a power source in accordance with the Standard UL 60950-1 and CAN/CSA C22.2 No. 60950-1, or UL 1310 and No. 1, CAN/CSA C22.2 No. 223, or No.1, CAN/CSA C22.2 No. 223; A vehicle adapter that complies with the enclosure and input contacts requirements in the Standard for Vehicle Battery Adapters, UL 2089, and Power Supplies, CAN/CSA C22.2 No. 107.1. The connector plug shall incorporate a fuse or other protective device having a current rating not greater than 15

WARNING

When using this product, basic precautions should always be followed, including the following:

• Read all the instructions before using the product.
• To reduce the risk of injury, close supervision is necessary when the product is used near children.
• Do not put your fingers or hands into the product.
• Use of an attachment not recommended or sold by the power pack manufacturer may result in a risk of fire, electric shock, or injury to persons.
• To reduce the risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting the power pack.
• Do not use a battery pack or appliance that is damaged or modified.
• Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
• Do not operate the power pack with a damaged cord or plug, or a damaged Output cable.
• Do not disassemble the power pack, take it to a qualified service person when service or repair is required.
• Incorrect reassembly may result in a risk of fire or electric shock.
• To reduce the risk of electric shock, unplug the power pack from the outlet before attempting any instructed servicing.

WARNING- RISK OF EXPLOSIVE GASES.

To reduce the risk of battery explosion, follow these instructions and those published by the battery manutacturer and manutacturer of any equipment you intend to use in the vicinity of the battery. Review cautionary marking on these products and on engines.

PERSONAL PRECAUTIONS

• Have plenty of fresh water and soap nearby in case battery acid contacts Skin, clothing, or eyes.
• Wear complete eye protection and clothing protection. Avoid touching eyes while working near the battery.
• If battery acid contacts skin or clothing, wash immediately with soap and water.lf acid enters the eye, immediately flood the eye with running cold

Trouble Shooting

The device does not discharge:

• Checking whether the connecting wire has been inserted in right place;
• Checking whether the total output power exceeds the rated output power
• Checking whether the temperature of the equipment is too high.

The device can not be charged

• Confirm that the wall plug power adapter’s cord is inserted fully into the DC Input.
• Confirm that the AC wall plug power adapter is the charger provided with Mp330. If the input does not comply with the requirements located in the GENERAL SPECIFICATIONS section, the Low Watt range 0% to 10% may be displayed on.
• If the device cannot be charged immediately after it is discharged, please wait for an hour and try again, it may enter the over-temperature protection.

WARRANTY

Limited Warranty
We warrant to the original consumer purchaser that our product will be free from defects in workmanship and material under normal consumer use during applicable warranty period identified in the “Warranty Period” section below, subject to the exclusion set forth below. This warranty statement sets forth ours total and exclusive warranty obligation. We ill not assume, not authorize any person to assume for us, any other liability in connection with the sale of our products.

Warranty Period The warranty period is 12 months. In each case, the warranty period is measured starting on the date ot purchase by the original consumer purchaser. The sales receipt from the first consumer purchase, or other reasonable documentary proof, is required in order to establish the start date of the warranty period.

Remedy We will repair or replace any our products that fail to operate during the applicable warranty period due to defects in workmanship or material. If a valid Claim is made during the applicable period, we at its option, will either replace the product. A replacement product assumes the remaining warranty of the ornginal product or ninety (90) days trom the date or replacement, whichever is greater. The customer is responsible for the return shipping costs. Limited to Original Consumer Buyer The warranty on ours product is limited to the original consumer purchaser and to any subsequent owner.

Maintenance and Warranty

Check as needed. If the MP330 energy storage power supply cannot be used regularly, please charge and discharge it every 3 months under normal temperatures to keep the service life. Regularly check all ports and wall chargers for any debris, dirt, damage, and corrosion. Regularly observe the side vents for dust and foreign matter, and clean them according to the cleaning procedures specified in the manual. Do not disassemble the device privately. Do not cover the equipment with towels, clothes or other items.

Disposal/Recycle
Do not put the device and its accessories in the trash can. items must be properly handled in accordance with local laws and regulations. For additional intormation, please see www.epa.gov.

Statement Copyright EBL. All rights reserved. All trademarks cited herein are the property of their respective owners.

Limited Warranty

We warrant to the original consumer purchaser that our product will be free from defects in workmanship and material under normal consumer use during applicable warranty period identified in the “Warranty Period” section below, subject to the exclusion set forth below. This warranty statement sets forth ours total and exclusive warranty obligation. We will not assume, not authorize any person to assume for us, any other liability in connection with the sale of our products.

Warranty Period
The warranty period is 12 months. In each case, the warranty period is measured starting on the date of purchase by the original consumer purchaser. The sales receipt from the first consumer purchase, or other reasonable documentary proof, is required in order establish the start date of the warranty period.

Remedy: We will repair or replace any our products that fails to operate during the applicable warranty period due to defect in workmanship or material. If a valid claim is made during the applicable period, we at its option, will either replace the product. A replacement product assumes the remaining warranty of the original product or ninety (90) days from the date of replacement, whichever is greater. Customer is responsible for the return shipping costs.

Limited to Original Consumer Buyer
The warranty on ours product is limited to the original consumer purchaser and to any subsequent owner.

Limited Warranty

We warrant to the original consumer purchaser that our product will be free from defects in workmanship and material under normal consumer use during applicable warranty period identified in the “Warranty Period” section below, subject to the exclusion set forth below. This warranty statement sets forth ours total and exclusive warranty obligation. We will not assume, not authorize any person to assume for us, any other liability in connection with the sale of our products.

Service
To obtain warranty service, contact our customer service team at service@eblmall.com

FCC

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>