cecotec 380 inox Bolero CoolMarket UF Instruction Manual

380 inox Bolero CoolMarket UF Instruction Manual

SAFETY INSTRUCTIONS

Read the instructions carefully before using the device for the first time and keep this instruction manual for future reference or new users.
– It is important to make sure all users are familiar with the device operation and safety features to prevent faults and unnecessary accidents.
– Make sure that the mains voltage in your house matches the voltage stated on the rating label of the product.
– This appliance can be used by children aged 8 and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, as long as they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children must not play with the  appliance.
The cleaning and maintenance of the appliance should not be carried out by children without supervision.
– Keep the packaging material away from children, as there is a risk of suffocation.
– WARNING: if the interior light is damaged, contact the Cecotec Technical Support Service. Do not try to repair it on your own.
– WARNING: when positioning the appliance, make sure the power cord is not trapped or damaged. A crushed or damaged connector may heat up and cause a fire.
– Make sure you can access the device main connector after the installation.
– Do not place food directly against the air outlet on the interior of the device.
– Keep the ventilation openings clear from obstructions.
– Do not place carbonated or fizzy drinks inside the device when the freezer mode is active, as it could create pressure in the container and it may explode and damage the device.
– WARNING: do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by Cecotec.
– WARNING: do not damage the refrigeration circuit.
– If the cable is damaged, it must be replaced by the manufacturer, the supplier or qualified personnel in order to avoid a hazard.
– WARNING: do not use electrical appliances inside the device.
– We recommend you check the power cord regularly to detect any sign of possible damage, do not use the device if the cord is damaged, contact the Technical Support  Service of Cecotec.
– To avoid injuries or death because of an electric shock, do not use the device with your hands wet, nor over a wet surface.
– You should never use this device with an extension cord or a multiple connector. Make sure the device is plugged in directly to a power supply.
– When installing the appliance, make sure that there is a free space in the rear part, as this is the main heat outlet. This will allow for adequate ventilation.
– Do not place hot food or drinks in the device, allow them to cool to room temperature.
– Do not place any other appliance on the freezer and do not wet it.
– Do not store explosive substances such as aerosols or flammable propellants in this appliance.
– This product is exclusively designed for household use. Do not use it for commercial purposes, outdoors or in damp environments.
– WARNING: to avoid any risk due to the instability of the freezer, you must install it according to the instructions.
– This device has a built-in earthed plug. Make sure the power supply in your house is properly grounded.
– Wait 5 minutes after a power failure before turning the appliance back on. Otherwise, the compressor may be damaged.
– This appliance is not intended to be operated by means of an external timer or separate remote-control system.
– Always handle the device carefully to avoid any damage on it.
– Frozen food can cause ice burns if it is consumed right after removing it from the freezer.
– Do not remove or touch freezer items with your hands wet, as it could cause skin abrasions or frost/freeze burns.
– Never use the base, drawers or door as support.
– Do not overload the door shelves or place too much food on the drawers to prevent items from falling off and damaging the device.
– WARNING: do not attach multi-plug power strips or multiple power supplies to the rear part of the device.
– To avoid food contamination, please respect the following instructions:
– Opening the door for a long period of time may cause a significant increase of the temperature in the device compartments.
– Regularly clean the surfaces that come into contact with food and with the accessible draining systems.
– Store raw meat and fish in proper containers in the refrigerator, so they do not come into contact or leak on other food.
– The two-star compartments are suitable for storing pre-frozen food, storing or making ice cream and making ice cubes.
– Compartments with one, two or three stars are not suitable for freezing fresh food.
– Before carrying out any maintenance and cleaning task, turn off the device and unplug it from the main power socket.
– It is advisable to wait for at least four hours before connecting the device to allow oil to flow through the compressor.
– Air must flow around the device: lack of air leads to overheating. To achieve a good ventilation, follow the installation instructions.
– Whenever possible, the rear part of the product should not be too close to the wall to prevent it from touching or reaching the hot parts (the compressor and the condenser).
To avoid risk of fire, follow the installation instructions.
– Make sure the power cord is accessible after the device installation.
– All electrical work required to maintain this appliance must be carried out by a qualified electrician.

REFRIGERANT

– Isobutane refrigerant (R600a) is contained within the refrigeration circuit of the appliance; it is a natural gas with a high level of environmental compatibility, however, it is  flammable. Make sure that no components of the refrigeration circuit have been damaged during the transport and installation of the appliance.
– WARNING: the refrigerant and the insulator gas are flammable. When disposing of the device, only dispose of it at an authorised waste disposal facility. Do not expose it to flames.
– WARNING: the device contains refrigerant and gases in the insulation. The device and gases must be disposed of professionally as they may cause injuries to eyes or ignition.
Make sure the refrigeration circuit pipe is not damaged before disposing of it correctly.
– WARNING: risk of fire. If the refrigeration circuit is damaged:
– Avoid open flames and sources of ignition.
– Completely air the room where the device is located.

PARTS AND COMPONENTS

Fig. 1

1. Drawers
2. Drawers
3. Feet

Note:
– The graphics in this manual are schematic representations and may not exactly match the product.
– To make the most out of the freezer in terms of energy, place all the shelves and drawers in their original position, that is, as shown in figure 1.

BEFORE USE

– This freezer includes a packaging designed to protect it during transport. Take the freezer out of its box. You can keep the original box and other elements in a safe place,  this will help you prevent product damage when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled  accordingly.
– Make sure all parts and components are included and in good conditions. If there is any piece missing or not in good condition, immediately contact the Technical Support  Service of Cecotec.

INSTALLATION

Preparing for use
– The location you choose for the freezer must be properly ventilated and away from heat sources. Do not place the freezer near heat sources, like a cooker, and avoid direct  sunlight to ensure the cooling effect and save on energy consumption. It is not recommended to place the freezer in a wet place, as it may rust and cause electrical leakage.  The result of dividing the total space of the room in which the freezer is installed by the amount of refrigerant load in the freezer must not be less than 8 g/m 3.
– During operation, the freezer releases heat into the environment. Therefore, you should leave at least 30 mm of free space at the top, more than 100 mm on both sides and  more than 50 mm at the rear of the freezer.

Fig. 2
Note
Figure 2 only illustrates the space required for the freezer.

Stable surface
Place the freezer on a solid, flat surface to keep it stable, otherwise vibrations and noises will occur.
Ensure a ventilation free of obstacles around the freezer.

Waiting time
Once the freezer is installed and clean, do not turn it on immediately, wait at least 1 hour before connecting it to the power supply.

On
– Connect the plug into a power socket to switch on the freezer. After one hour, open the freezer compartment door, if the temperature inside the freezer compartment has  clearly dropped, the cooling system is operating normally.
– Once the freezer is operating and the temperature inside has considerably decreased, you can introduce food.
– If the freezer is installed in a wet place, you must check the earthed cord and the leakage breaker are working normally. If vibration noises occur due to contact of the freezer with the wall or if the wall turns black due to air convection around the compressor, remove the freezer from the wall.
– The installation of the freezer may cause interference in mobile phones, landline phones, radio receivers or televisions near the refrigerator, so in this case, keep the freezer  as far away from these objects as possible.

OPERATION

Fig. 3 Control panel

1. Temperature indicator
2. Freezer mode
3. Fast freeze
4. Alarm
5. Temperature increase
6. Temperature decrease
7. Function selection
8. Lock/OK
9. Refrigerator mode
10. Fast cooling
11. Child lock
12. Temperature units

When you connect the freezer to the power supply for the first time, all icons on the display will light up for 2 seconds, and the system will activate the freezer mode at -18ºC.  When the door is closed, the display will automatically switch off if no button is pressed within 3 minutes. The display will light up if you open any door or press any button.

Functions

1. Change between the refrigerator and freezer modes
   Hold down the temperature decrease button for 3 seconds to change between the refrigerator and freezer modes.

2. Temperature setting
   – Press the temperature increase or decrease buttons, the temperature indicator will start flashing, press these buttons again until you reach the desired temperature.  Finally, press the lock/OK button or wait for 5 seconds to confirm the temperature setting.
   – The temperature setting cycles are:
   – On the refrigerator mode: 2°C→3°C→4°C5°C→6°C→7°C→8°C→
   – On freezer mode: -16°C→-17°C→-18°C→-19°C→-20°C→-21°C→-22°C→-23°C→-24°C

3. Fast freeze
   – When you activate the fast freeze function, the freezer compartment temperature will be set to -32°C automatically for 26 hours. The fast freeze function is used to  prevent loss of nutritional quality and to preserve food freshness.
   – With the fast freeze function active, you will not be able to make any temperature setting. This function can only be activated on the freezer mode.
   Activation of the fast freeze function
   On the freezer mode, press the function selection button until the fast freeze icon starts flashing, then press the lock/OK button within 5 seconds to confirm your  choice. If you do not press the lock/OK button within 5 seconds, this function will not be activated.
   Deactivation of the fast freeze function
   – After 26 hours of operation, the fast freeze function will be automatically deactivated.
   – With the fast freeze function activated, press the function selection button until the fast freeze icon starts flashing, then press the lock/OK button to confirm and the fast freeze function will be deactivated.

4. Fast cooling
   – When the fast cooling function is active, the temperature of the freezer will be set at 2ºC. Decreasing the freezer temperature fast is useful to prevent nutritional loss  and for freshness preservation.
   – When the fast cooling function is active, you will not be able to make any temperature setting. This function can only be activated on the refrigerator mode.
   Activation of the fast cooling function
   On the refrigeration mode, press the function selection button until the Smart icon starts flashing, then press the lock/OK button within the next 5 seconds to confirm  your choice. If you do not press the lock/OK button within 5 seconds, this function will not be activated.
   Deactivation of the fast cooling function
   With the fast cooling function activated, press the function select button until the fast cooling icon starts flashing, then press the lock/OK button to confirm your  choice. The Smart function will be deactivated.

5. Child lock
   – When you activate the child lock, you will not be able to modify the temperature and function to avoid undesired changes.
   – If you do not press any button within 3 minutes, the child lock function will be activated automatically.
   – To activate or deactivate the child lock, hold down the lock/OK button for 3 seconds.

6. Open door alarm
   If any door is open for more than 3 minutes, the freezer will emit an alarm sound, which can be stopped by pressing any button, but will sound again if the door is still  open 3 minutes later.
   The alarm sound will not stop until you close the door.

7. Function memory after a power failure
   In the event of a power failure, the freezer will save the functions set before the power failure and will activate them when the power is restored.

8. Delay start
   To prevent damage to the freezer compressor in the event of a short power failure (i.e. less than 5 minutes), the compressor will not start immediately after switching on.

9. Overheating warning (only after a power failure)
   When the cooling system is on and on the freezer mode, if the freezer temperature is over -10°C, the temperature digits will flash on the display. You can display the  temperature when you press any button, and the display will return to its normal condition if you press any button again or after 5 seconds.

10. Fault alarm
    If the display shows E0, E1, E2, EH or EC, it indicates there has been a freezer failure. Contact the Technical Support Service of Cecotec.

INSTRUCTIONS ON FOOD STORAGE

Use cautions
– The freezer may not operate consistently (there may be some defrosting of the contents or the temperature may become too hot) if placed in locations with a temperature  out of the temperature range for which they are designed for a long period of time.
– The internal temperature may be affected by factors such as the location of the freezer, room temperature and the door opening frequency, etc., and you should take these  factors into account if you decide to use any temperature control devices.
– Do not store effervescent or carbonated drinks inside the device when the freezer mode is active.

Food storage
– Refrigerator mode: it is suitable to store food that does not need to be frozen, cooked food, soft drinks, eggs, milk, juice, etc.
– The freezer compartment is suitable to store ice cream, frozen foods and food that needs to be kept for a long time.
– Drawers: pull the drawer to access food.

Care for food storage
– Clean and dry food completely before storing it in the device. Before introducing food in the device, it is advisable to seal it to prevent water evaporation and thus keep fruit and vegetables fresh on the one hand, and to prevent odours on the other.
– Leave enough space between the food; if they are too close together, they will block the flow of cold air, which will affect the cooling effect. Do not store too much or too  heavy food to prevent the shelves from bending. When storing food, leave a distance from the interior wall; do not place water-rich food too close to the rear wall of the  appliance when the refrigerator mode is activated, to prevent them from freezing on the inside wall.
– Food storage by category: place daily food items at the front of the shelf so that you can reduce the door opening time and avoid food spoilage due to shelf life.
– Energy saving tips: let hot food cool to room temperature before introducing it in the device.
– Please note that some foods are sensitive to cold and are therefore not suitable for storage in the appliance.

Use of the freezer mode
– This mode is advisable for storing food that you wish to keep for a long period of time, always respecting the storage time indicated on the food packaging.
– Large fish and meat should be cut into small pieces and placed in freezer bags before placing them in the freezer compartment drawers.
– Let hot food cool down to room temperature before introducing it in the freezer compartment.
– Do not place a glass container with liquid or sealed canned liquid in the freezer to prevent them from exploding due to volume expansion after freezing the liquid.
– Food should be packed or covered with suitable materials that are firm, tasteless, impermeable to air and water, non-toxic and non-polluting, to avoid cross-contamination and odour transfer.

CLEANING AND MAINTENANCE

If the freezer is not going to be used for a long period of time:
– Turn off the freezer and unplug it from the power supply.
– Remove all the food.
– Clean and dry the interior completely. To prevent mould or unpleasant odours from forming, leave the door slightly open: lock it open or remove it if necessary.
– Store the appliance in a ventilated and dry place, away from heat sources; place the appliance carefully and do not place heavy objects on it.
– The device must be kept out of the reach of children to prevent them from playing with it.
Before cleaning, disconnect the power plug; do not connect or disconnect the power plug with your hands wet, as there is a risk of electric shock and injury. Do not spill  water directly on the freezer to avoid rust, electrical leakage and accidents. Do not reach into the bottom of the freezer, as you may get scratched by the sharp metal corners.

Interior and exterior cleaning
– Food residues in the freezer can cause undesired odours, so you should clean the freezer regularly. The refrigerator compartment should be cleaned once a month.
– Remove all drawers and clean them with a soft cloth or sponge dampened with warm water or neutral detergent.
– Clean the dust that accumulates on the rear panel and side panels of the freezer regularly.
– After using detergent, make sure you rinse it with clean water, and then dry it with a cloth.
– Do not use bristle brushes, steel wire brushes, detergent, soap powder, alkaline detergent, benzine, petrol, acid, hot water or other corrosive elements to clean the freezer surface, door gasket, plastic decorative parts, etc., to avoid damage.
– Carefully dry the door gasket and clean the slot with a wooden stick wrapped with cotton. After cleaning, fix the four corners of the door gasket and then gradually push it  into the slot in the door.

Power failure or cooling system fault
If you receive an early power failure warning:
– Activate the fast freeze function, so that food is completely frozen. Set the temperature back to the original setting when the power supply returns to normal.

Note:
It is advisable to run the freezer uninterruptedly once you start using it.

Defrost
This freezer includes an automatic defrost function, so there is no need to defrost it manually.

Light bulb substitution
The freezer has a LED light with low consumption and a long shelf life. In case of malfunction, contact the official Technical Support Service of Cecotec. The light bulb can  only be substituted by the manufacturer.

Note:
If the power cord and/or plug are damaged or dusty, electric shock and fire may occur. If there is any malfunction, disconnect the cord and contact the Technical Support Service of Cecotec.

TROUBLESHOOTING

For the following minor malfunctions, please try to solve the problem yourself before contacting Cecotec Technical Support Service.

The circuit breakers or fuses are damaged.
There is no power or the fuse trips.| Connect the freezer to a power supply.
Open the door and check the light is on.
Abnormal noise| The freezer is not stable.
The freezer is in contact with the wall.| Adjust the levelling feet.
Remove the freezer from the wall.
Low cooling efficiency| The food introduced is hot or there is too much food.
You open the door too often.
The door gasket has objects that do not allow to close it completely. The freezer receives direct sunlight or is close to a heat source.
The freezer is not well ventilated. The selected temperature is too high.| Introduce food in the freezer when it is at room temperature.
Check and close the door.
Remove the freezer from the heat source.
Keep the recommended distances in the installation section so the freezer is well ventilated.
Adjust a suitable temperature.
---|---|---
Undesired odours in the freezer.| There is spoiled food inside. The freezer is dirty.
You introduced food with strong smells.| Dispose of food which is spoiled. Clean the freezer.
Pack food, especially if it has a strong smell.
The buttons do not work| Check if the child lock is active.| Hold down the Unlock button for 3 seconds to deactivate the child lock and press any button. (To get more information, read the instructions on the child lock).
You cannot set the temperature.| Check that the fast cooling or freeze functions are not active on the control panel.| Deactivate the special functions and then set the temperature (for more details, check the Operation section).
The temperature on the freezer compartment is shown on the panel, but it flashes.| Check that the power supply has not been cut off before.| Press any button to activate the alarm (check the overheating warning section) and check that the food inside the freezer is not spoiled.

Note:
If none of these situations match your problem, do not attempt to disassemble or repair the freezer yourself. Repairs carried out by unqualified persons may result in injury or serious malfunctions. Please contact the place where you bought the appliance or the Cecotec Technical Support Service. The repair must be carried out by an authorised  technician and you must use only original spare parts.

sensor
E1| Fault of the evaporator sensor
EC| Fault in the communication
EH| Fault of the room temperature sensor

– If faults E0 and E1 should light up at one, E2 will light up instead.
– If any of these codes is shown, contact the Technical Support Service of Cecotec.

TECHNICAL SPECIFICATIONS

You can access the product database where the information for this model is stored by scanning the QR code on the energy label.

(*) Freezer intended for use at room temperatures between 10 °C and 43 °C.
This product features a light source with an energy efficiency grade G.
Made in China | Designed in Spain

DISPOSAL OF OLD ELECTRICAL APPLIANCES

This symbol indicates that, according to the applicable regulations, the product and/or battery must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the batteries/accumulators and take them to a collection point designated by the local authorities.
Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.
Compliance with the above guidelines will help to protect the environment.

TECHNICAL SUPPORT AND WARRANTY

Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions and deadlines  established by the applicable regulations.
It is recommended that repairs be carried out by qualified personnel.
If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact Cecotec official Technical Support Service at +34 963 210 728.

COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in  whole or in part, be reproduced, stored in a retrieval system, transmitted or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the  prior authorization of CECOTEC INNOVACIONES, S.L.

www.cecotec.es
Cecotec Innovaciones S. L.
46930
Quart de Poblet, Valencia, Spain
EA01220509

Documents / Resources

| cecotec 380 inox Bolero CoolMarket UF [pdf] Instruction Manual
380 inox Bolero CoolMarket UF, 380 inox, Bolero CoolMarket UF, CoolMarket UF
---|---

References

• Cecotec Tienda Oficial | Envío Gratis | Mejor Precio

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>