DOUBLE CERAMIC BC700 Heated Straight Brush Instruction Manual
- June 8, 2024
- DOUBLE CERAMIC
Table of Contents
DOUBLE CERAMIC BC700 Heated Straight Brush
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present, basic safety precautions should always be taken, including the following:
- Always unplug appliance immediately after using.
- Do not use while bathing.
- Do not place or store appliance where it can fall or be pulled into a tub or sink.
- Do not place in or drop into water or other liquids.
- If an appliance falls into water, unplug it immediately. Do not reach into the water.
OPERATING INSTRUCTIONS
This heated brush is intended for household use. Use on Alternating Current (50/60 hertz) only. This unit is designed to be operated at 120/240V AC. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
GETTING STARTED The heated brush’s settings and Instant Heat technology provide unique styling versatility for all hair types. If you have fine hair, a low temperature will provide the best results. If you have thick or wavy hair, keep the heat setting on high. You can vary the brush’s temperature according to your particular need!
Temperature Setting Guide
STYLING WITH DOUBLE CERAMIC TECHNOLOGY Your new heated brush has an Easy- Glide™ double ceramic-coated surface, the newest technology. This double ceramic-coated surface helps to smooth down flyaways. As you clamp hair, it evenly distributes heat so that the style you create has a salon-perfect, silky smooth, shiny finish. Any residue from styling products that builds up on the ceramic-coated brush can be easily cleaned.
TO STYLE HAIR
The brush is perfect for everyday styling and touch-ups. Simply press the +/- Temperature buttons to choose the temperature setting and follow these steps to detangle and smooth hair. To lock the temperature, press the ON/OFF button two times. The lock icon will appear. To unlock, press the ON/OFF button two times again. The lock icon will disappear.
- Ensure that hair is fully dry. Use a hairbrush to remove any tangles from the hair and create your part to get ready for styling.
- Place the heated brush underneath a hair section close to the roots with the bristles pointing upward. Use your other hand to pull the hair section taut against the heated plate until the bristles penetrate through the hair.
- Glide the heated brush steadily down toward the ends of the hair. Continue to use the other hand to keep the hair taut, sliding it down the section ahead of the brush.
- As the heated brush nears the end of the hair, release the section with the other hand and turn the heated brush under to give shape at the ends of the hair.
- To finish your style and smooth the top of the hair, place the heated brush on the top of the hair section. Use the other hand to pull the section upward and taut against the heated plate until the bristles penetrate through the hair. Take care to avoid pressing the heated plate against the scalp.
- Glide the heated brush down toward the ends of the hair, using the other hand as before to keep the section taut.
USING INSTANT HEAT, THE 5 HEAT SETTINGS & UNIFORM HEAT RECOVERY SYSTEM
This styling brush features a heater that maintains constant temperature
during use for precision styling. This Instant Heat technology has 5 heat
settings. There is a temperature setting that’s gentle and safe for every type
of hair, from the finest to the curliest and most resistant, to help you
create the look you want. And that’s not all. Conair’s professional salon
standards of engineering provide you with a uniform and improved Heat Recovery
System that maintains the heated brush at constant temperatures. There is a
constant surge of power to ensure that heat is continuously and quickly
delivered for optimal styling results, unlike other units, which lose heat
during use. This provides consistent styling power so that every strand of
your hair is set with the same level of heat and comes out the same way for a
perfect finish
GET TO KNOW YOUR HOT HEATED BRUSH
USER MAINTENANCE Your heated brush is virtually maintenance-free. No lubrication is needed. Keep all vents and openings clear of dirt and dust. If cleaning becomes necessary, disconnect the heated brush from the power source, let it cool, and wipe exterior with a cloth. If any abnormal condition occurs, unplug the heated brush, allow it to cool, and return it for repair to an authorized service center only. No repairs should be attempted by the consumer.
STORAGE When not in use, your appliance should be disconnected, allowed to cool, and stored in a safe, dry location, out of reach of children. Do not jerk or strain cord at plug connections. Do not wrap the line cord around the appliance. Allow the cord to hang or lie loose and straight at the point of entry into the appliance
KEEP AWAY FROM WATER
Everyone knows that electricity and water are a dangerous combination. But
did you know that an electric appliance is still electrically live even if the
switch is off? If the plug is in, the power is on. So when you are not using
your appliances, keep them unplugged.
LIMITED THREE-YEAR WARRANTY (U.S. AND CANADA ONLY)
Conair will repair or replace (at our option) your unit free of charge for 36
months from the date of purchase if the appliance is defective in workmanship
or materials. To obtain service under this warranty, return the defective
product to the service center listed on back, together with your purchase
receipt. California residents need only provide proof of purchase and should
call 1-800-3-CONAIR for shipping instructions. In the absence of a purchase
receipt, the warranty period shall be 36 months from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED
TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED IN DURATION TO THE 36-MONTH DURATION OF THIS
WRITTEN, LIMITED WARRANTY. Some states do not allow limitations on how long an
implied warranty lasts, so the above limitations may not apply to you. IN NO
EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED,
WHATSOEVER. Some states do not allow the exclusion or limitation of special,
incidental, or consequential damages, so the above limitation may not apply to
you. This warranty gives you specific legal rights, and you may also have
other rights, which vary from state to state.
SUPPLIER’S DECLARATION OF CONFORMITY
- Brand: Conair®
- Model No.: BC700
- Description: Heated Brush
- Responsible Party: Conair LLC,
- 1 Cummings Point Road, Stamford, CT 06902 203-351-9000
- Standards: FCC Part 15 Subpart B,
- ANSI C63.4-2014
FCC
FEDERAL COMMUNICATIONS COMMISSION NOTICE WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>