SUNCO LIGHTING 99355 Remote for LED Spectra Instruction Manual
- June 9, 2024
- Sunco Lighting
Table of Contents
SUNCO LIGHTING 99355 Remote for LED Spectra Instruction Manual
Remot Control Buttan Instruction
| Turn ON Turn OFF
---|---
Hand held remote controller cannot be used directly as the only on-off switch
it should be used together with the switchi The fixture needs to be turned off
for the night with a standard hard-wired wall switch (or at the breaker
panel)i
| Turn off the light to save the current color temperature then turn on
the light, the last saved color temperature will be displayed by defaulti
| MATCHING CODE FOR LIGHT
Holding the ‘ID’ button will keep the controller’s indicator on, then turn
on the light and release the ‘ID’ button after the light flashes, matching
code completei Matching code for several lights simultaneously is availablei
** +| RELEASE THE CODE AND DISCONNECT LIGHT FROM REMOTE CONTROLLER
Press the bottom ****+ together, then turn on the light, the light will
flash to finish releasing the code onthe lightsi
**| GROUP SELECTING BUTTON
Grouping lights (matching code process needs to be completed first)i Turn
off the lights, continue pressingthe group selection button for 3s, then turn
on the lights the lights will flash to finish groupingi
| SAVE BUTTON
Press and hold (3-5 seconds) the “SAVE” button until the light goes out,
the current brightness and color temperature are automatically savedi Turn off
lights then turn on, the last saved brightness and color temperature will be
displayed by defaulti
| **ALL GROUPS ARE SELECTED
COLOR TEMPERATURE AND BRIGHTNESS SELECTION**
| | |
Color Temperature
| | |
Brightness
Increase Brightness|
Decrease Brightness|
Decrease Color Temperature|
Increase Color Temperature
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>