GROW 554231110 20w Tabletop Plant Light User Guide
- June 9, 2024
- GROW
Table of Contents
GROW 554231110 20w Tabletop Plant Light
Package Contents
| Part | Description | Quantity |
|---|---|---|
| A | Bracket | 1 |
| B | Base | 1 |
| C | Luminaire | 1 |
NOTE : Keep your receipt and these instructions for proof of purchase.
WARNING : RISK OF ELECTRIC SHOCK. Ensure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off the circuit breaker before removing an existing light fixture or installing the new one. If you are unfamiliar with electrical installations, we recommend you contact a qualified electrician to do the installation.
INSTALLATION
- Push B and C to connect with A, hold the studdle for easily push and assembly.
- Insert the plug into the 120VAC socket and check the luminaire working status.
- The switch can be used to adjust the light time and extinguish on every next day.
NOTE : When the time deviation is too large, the power-off can be restarted.
Planting Suggestion
The potted plant is placed on the base, and the lamp head is adjusted to a suitable height. It is recommended that the distance from the lamp head to the blade is 15cm (5.9in.).
Care and Cleaning
CAUTION : Before attempting to clean the tube and luminaire/light fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the fuse box. Clean with a soft, dry cloth. Do not use cleaners with chemicals, solvents, or harsh abrasives. Do not use liquid cleaner on the LEDs, LED driver, or wiring
Troubleshooting
Minor problems often can be fixed without the help of an electrician.
WARNING : Before doing any work on the fixture, disconnect power to the light fixture
| Problem | Possible cause | Solution |
|---|---|---|
| The fixture will not light. | The power is off. | Ensure the power supply is on. |
| The circuit breaker is off. | Ensure the circuit breaker is in the on position. | |
| There is a defective switch. | Contact a qualified electrician. | |
| The power cord is loose. | Remove the power cord from the outlet. Ensure the |
power cord is firmly inserted into the GrowElite® light fixture and then plug
the other end of the power cord back into the outlet.
The fuse blows or the circuit breaker trips when the light is turned on.| The
power cord is grounding out.| Contact a qualified electrician or call customer
service 1 800-916-7680.
WARNING: Carefully read and understand the information given in this manual before beginning the assembly and installation. Failure to do so could lead to electric shock, fire, or other injuries which could be hazardous or even fatal.
- Risk of fire or electric shock. Installation of this LED Retrofit Kit assembly requires a person familiar with the construction and operation of the light fixture’s/luminaire’s electrical system and the hazard involved. If not qualified, do not attempt installation. Contact a qualified electrician.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
- To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
NOTICE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna, increase the separationbetween the equipment and the receiver, connect the equipment into an outlet on a circuit different from that to which the receiver is connected, and consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
WARRANTY
This product is warranted for a period of 3 years from the date of original purchase against defects in materials and workmanship. No ETi-SSL or reseller, agent, or employee is authorized to make any modification, extension, or addition to this Warranty. If any term is held to be illegal or unenforceable, the legality or enforceability of the remaining terms shall not be affected or impaired. This Warranty is governed by and construed under the laws of the country in which the Product purchase took place. If this product should fail to operate due to defects in material or workmanship within 36 months of purchase, see www.ETiSSL.com for details. This product will be repaired or replaced, at ETi’s option. This warranty is expressly limited to repair or replacement of product and liability for direct, incidental, or consequential damages is hereby expressly excluded. Some states / provinces do not allow exclusions of direct, incidental or consequential damages, so the above limitation of exclusion may not apply to you. This warranty gives the consumer specific legal rights, which vary from state to state / provinceto province. FOR A FULL UNDERSTANDING OF YOUR RIGHTS YOU SHOULD CONSULT THE LAWS OF YOUR STATE / PROVINCE. Residents of Quebec are governed by that province’s consumer protection legislation. WARRANTY IS VOID IF PRODUCT IS NOT USED FOR THE PURPOSE WHICH THIS PRODUCT IS MANUFACTURED.
Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. – 5 p.m., EST, Monday – Friday 1 800-916-7680 | www.GrowEliteLED.com Retain this manual for future use
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>