LDT-01 Decoder Case Instruction Manual
- June 9, 2024
- LDT
Table of Contents
LDT-01 Decoder Case
Introduction
You have purchased the case LDT-01 for your model railway which is supplied within the assortment of Littfinski DatenTechnik (LDT).
- The case is suitable for the installation of many LDT components from the Digital-Professional-Series !
Installation Instruction
Decoder-Case from the Digital-Professional-Series !
LDT-01 Part-No.: 000104
Suitable for the LDT-Decoder:
- 4-fold turnout decoder S-DEC-4 / 1-DEC-DC
- 4-fold switch decoder SA-DEC-4
- 4-fold decoder for motor driven turnouts M-DEC
- DigitalBooster DB-2 / Adap-CDE / Adap-Roco
- 16-fold feedback module RM-88-N / RM-88-N-O
- Booster Keep Separate Module BTM-SG
- Reverse-Loop Module KSM-SG
- 4-fold light-signal decoder LS-DEC
- 4-fold train influence module ZBM
- 16-fold feedback module RS-16-O
- HSI-88(-USB) and Data switch DSW-88-N
- WatchDog-decoder WD-DEC
- TrainDetect-88 TD-88 / Transp. reader COL-10
- Track occupancy detector GBM-8
- DiCoStation and Key Commander Key Com
- Turn Table-Decoder TT-DEC / TT-DEC-R
- Supply Box SB-4
This product is not a toy! Not suitable for children under 14 years of age! The kit contains small parts, which should be kept away from children under 3! Improper use will imply danger of injuring due to sharp edges and tips! Please store this instruction carefully.
Installation of the decoder
The case consists of a lower 1 and a upper cover 2. The printed circuit board
of the decoder shall be placed into the lower case. The upper case can be
easily closed over the pc-board by snap locks. The connection clamps and the
operating devices (as per respective decoder: program push button, plug
connectors or bridge-plugs) will be free accessible.
Please copy the rear side of the installation instruction, cut out the
suitable label for your decoder and stick it on top of the upper casing.
Further Products from our Digital Professional-Series
S-DEC-4
4-fold turnout decoder for four magnet accessories and 1 Amp. switching power
each. With free programmable decoder addresses and possible external power
supply.
M-DEC
4-fold decoder for motor driven turnout-drives (Conrad, Hoffmann, Fulgurex and
others) with free programmable decoder addresses and possible external power
supply.
SA-DEC-4
4-fold switch decoder with 4 bistable relays and 2 Amp. switching power each.
With free programmable decoder addresses and possible external power supply.
RM-88-N / RM-88-N-O
16-fold feedback modules (also with integrated opto-coupling) for the
s88-feedback bus for the connection to Memory and Interface (Märklin /
Arnold), Central Station 1 and 2, ECoS, Intellibox respectively TWIN-CENTER,
Easy Control, DiCoStation and HSI-88.
RM-GB-8-N
8-fold feedback module with integrated track occupancy detectors for the
s88-feedback bus.
RS-8
8-fold feedback module with integrated track occupancy feedback and voltage
monitor for the RS-feedback bus.
DB-2
Short circuit protected Digital Booster (Märklin-Motorola- and DCC-Format) for
Control Unit, Intellibox, TWIN-CENTER, Easy Control, ECoS, DiCoStation, KeyCom
and PC-Direct control DIGITAL-S-INSIDE.
HSI-88(-USB)
High Speed Interface for the s88-feedback bus. Offers the possibility to
create three s88-feedback lines. The feedback reports will be transmitted
directly via the digital central unit to the PC via the serial COM- or USB-
port.
WD-DEC
The WatchDog-Decoder stops automatically all trains in case of a PC or digital
central-control-unit brake down.
All products can be purchased as easy to assemble complete kits or as ready finished modules or finished module in a case.
Be a Digital-Professional!
Decoder of single coil turnouts: 1-DEC-DC
4-fold decoder of DCC digital systems. Current load: 1 Ampere max.on each output.
|
Littfinski DatenTechnik (LDT)
www.ldt-infocenter.com
Be a Digital-Professional!
Decoder for motor (turnout-) drives: M-DEC-MM
4-fold decoder of Märklin-Motorola digital systems. Motor current: 1 Ampere
max.on each output.
|
Littfinski DatenTechnik (LDT)
www.ldt-infocenter.com
Be a Digital-Professional!
Decoder for motor (turnout-) drives: M-DEC-DC
Be a Digital-Professional!
4-fold decoder of DCC digital systems. Motor current: 1 Ampere max.on each
output.
|
Littfinski DatenTechnik (LDT)
www.ldt-infocenter.com
Be a Digital-Professional!
SupplyBox SB-4
4-fach Spannungsverteilung vom Schaltnetzteilen.
4-fold voltage distribution from switching power supplies.
|
Littfinski DatenTechnik (LDT)
www.ldt-infocenter.com
Customer Support
Made in Europe by
Littfinski DatenTechnik (LDT)
Bühler electronic GmbH
Ulmenstraße 43
15370 Fredersdorf / Germany
Phone: +49 (0) 33439 / 867-0
Internet: www.ldt-infocenter.com
Subject to technical changes and errors. ©03/2022 by LDT