HUUM 13kw HIVE Wood User Manual

HIVE Wood
13 kW 17 kW 17 kW LS
s) SAUNA STOVE (@) Po~LE DE SAUNA

13kw HIVE Wood

HIVE Wood
SAUNA STOVE
Installation and user instructions
Important! These instructions provide simultaneously the installation instructions for models 13kW, 17kW and 17kW LS. Follow the instructions for your model carefully.
Important! We recommend a specialist to lay the stones on the heater.
Important! The sauna stove described in these instructions should only be connected to the chimney by a specialist.
The HIVE Wood sauna stove delivery package includes

• a sauna stove
• installation and user instructions for the sauna stove

Important! The sauna stove requires sauna stones.

| HIVE
Wood 13| HIVE
Wood 17
---|---|---
Technical specifications of the sauna stove
Steam room bze range| 212-459 Its
6-13 ms| 283-565 fts
8-16 ms
Nominal heating power (ION)| 13| 17
Steel frame ckameter| 17.7n
450 mm| 219 rt
555mm
Depth + extensicn of the combustion chamber LS| 13.8n
350 mm| 244 in1620
elm •
6111/156
mrnLS
Height| 29.6 in
750mm| 29.6 in
750mm
Empty voilipt| 100 lb
45 kg| 15513
70 kg
Weight of StOneS| 1991b
90 kg| 2871b
130 kg
Thickness of furnace walls| 0.21n
5mm| 021n
5mm
Maximum length of f reWcod| 11.8n
30 cm| 15.71n
40 cm
Diameter of fireWood| 3.1-5.9 in
8-15 cm| 3.1-5.9 in
8-15cm
Diameter of smoke outlet| 4.53n
115 mm| 4.53n
115 mm
Required tenteratue class of chirmay| 1600| 1600
Minim= cross SeCtIOn of chimney| 15.8141
10200 mrn2| 15.81 ri2
10200 mm’
minimtrn cross section of vents| 1237412 7850 mms| 1237412
7850 mms
Heating power in steam room (kW)| 13| 17.
Fuer| Wood| Wood
Safetydistances from oombustible materials| Table I| Table 1
Foe safety (ignition of nearby objects)| Passed| Passed
Exhaust gases of the combustion process| Passed| Passed
Surface temperahre| Passed| Passed
Emission of hazardous compounds| WO| 1•PD
Cleanotolity| Passed| Passed
Flue gas temperature| 806°F
430°C| 829.4°F
443°C
Mechanical resistance| Passed| Passed
Carbon dioxide emissions at 13% 0f 0,content (% )| Passed
(0.67)| Passed
(0.67)
To tal efficiency (%)| 67| 66
Minimum required chimney draught (Pa)| 12| 12
Wood weight/ in three parts up to| 19 / 8 8 lb 8,6/4kg| 247/124Ib
11,215.6kg
Ash tray opening during ignition / after ignition| 0.4/0.08­ 0.12in
10/2-3mm| 0.4/0.08­
0.12in0
10/2-3mm

NDD – No permanent data

Application area| Multi-firing sauna stoves heated by
natural Wood logs
---|---
Meets requirement| EN 15821 2010
HUUM Sauna OU Vinkli 2. Tartu, 51014. Estonia c

Congratulations, you’ve made an excellent choice!
The HUUM sauna stove is the best of its kind and will serve you for a very long time with the correct use and maintenance.
Read the instructions carefully before installation and use.
Keep these instructions for future reference.
Important! Read the instructions carefully before using the sauna hea­ ter!

GENERAL

The Wood HIVE sauna stove is intended for dry or wet sauna steam.
Our product range includes various modifications for the HIVE Wood sauna stoves. Consumers can choose between stoves with different nominal power. The stove can be equipped with a hot water production accessory and a wall furnace aperture, which is marked with letters LS in these instructions.

INSTALLATION

• Installation of the sauna stove must conform to all local normative documents, including the applicable national and European Union standards relating to the installation, including 158212010.
• Safety distances A, Band 47.3 in/1200 mm above the stove are given for combustible materials.
• If the stove is installed in a niche composed of non-combustible material (stone, concrete), at least 4 in/100 mm should be left between the wall and the stove for air movement
• The safety distance for combustible materials can be reduced to 1/2in the case of a single and 1/4 in the case of a double heat barrier. The heat barrier is considered within the safety distance, and the difference between the outer surface and the protected area must be at least 1.2 in/30 mm.
• The sauna stove must be installed on a non-combustible surface with the required carrying capacity.
• Electrical equipment and wiring are not permitted in the safety area of the sauna stove.
  

| Power| Room| A| B| C| D| E| F| 0| H
---|---|---|---|---|---|---|---|---|---|---
Table
1
HIVE| 13 kW| 212-| 9.85 in| 35.5 in| 9.5 in| 16.74 in| 0.2 in| 11.82 in| 17.8 in| 29.6 in
Wood| | 459 W| | | | | | | |
13| | 6-13 M3| 250 mm| 900 mm| 240 mm| 425 mm| 5 mm| 300 mm| 450 mm| 750 mm
HIVE| 17 kW| 283-| 19.7 in| 39.4 in| 11.82 in| 1811 in| 1.4 in| 15.75 in| 21.9 in| 29.6 in
Wood| | 565ft3| | | | | 7.3 in| 15.55 inis| |
17| | | | | | | 35 mm| 400 mm| |
| | 8-16 M3| 500 mm| 1000mm| 300 mm| 460 mm| 185 mm’s| 395 mm’s| 555 mm| 750 mm

Installing HIVE Wood 17 LS to be heated from another  room

• The furnace bushing of the sauna stove must be made through a non-combustible wall (stone, concrete, etc.).
• In addition, insulation with mineral wool or similar is recommended.
• At least 4 in/100 mm must be left between the bushing and the stove to facilitate the movement of air, so 7.9 in/200 mm must be added to height and width C in Table 1 when calculating the dimensions of the opening.
• If the floor in front of the furnace is made from combustible material, fire-resistant f1oor protection must be installed in front of the furnace door. The protection must be 23.63 in/600 mm wider than door width C, with a depth of at least 15.75 in/400 mm.

Connecting the sauna stove with the chimney

• The f1ue gas outlet of HUUM sauna stoves is at the top of the sauna stove. The sauna stove is connected to the chimney using special metal f1ue pipes, which are optionally sealed with heat­ resistant sealing rope.
• The elbows of the connection tubes must be smooth to keep draught loss to a minimum.
• The tube is inserted through the wall of the chimney and sealed with mineral wool.
• The sauna stove can only be connected to the chimney by specialists.
• The f1ue gases of the stove must be directed into a separate flue.
• Use of a common f1ue with other furnaces is not permitted.

Important! Forced extract ventilation may cause problems with the ventilation of the room and inadequate furnace combustion, therefore, designing and building such a ventilation system is permitted only with the supervision of a licensed specialist.

APPLICATION INSTRUCTION

Preparation for use

• Any natural granite stones or special sauna stove stones sold at hardware stores are suitable for the sauna stove. Use of ceramic stones may shorten the life of the stove.
• The stones must be washed clean before laying. Sauna stove stone quantities
• HIVE Wood 13 6 x 33 lb/ 6 x 15kg;
• HIVE Wood 17 9 x 33 lb/ 9 x 15kg.

Important! The sauna stove can only be heated with Wood logs.

Heating the sauna

• Avoid overheating the sauna stove; overheating is indicated when the furnace case glows red. Overheating causes the metal to deform, and the manufacturer is not responsible for this defect.
• In the case of overheating, the ash tray must be completely closed to stop the furnace combustion process. Keep the furnace door closed. If possible. cut off air f1ow to the room.
• It is recommended each time you heat the sauna stove that some quantity of the fuel consists of small and easily flammable pieces of material which are more porous and lighter compared to the rest of the fuel quantity.
• The sauna stove can only be heated with Wood logs. For HIVE Wood 13 logs with a length of 118 in/30 cm are the best and for HIVE Wood 17 logs with a length of 15.7 in/40 cm.
• The amount of air combustion is adjusted by changing the position of the ash tray drawer. During ignition, it is advisable to keep the ash tray open by up to 0.4 in/10 mm. As the material ignites, close the ash tray to the point where the distance between the front of the tray and the wall is 0.08-0.12 in/2-3 mm depending on the draught
• Keep the furnace door closed during heating. Open the door only to add fireWood.
• Avoid splashing water onto the hot glass of sauna stoves with a glass door. Tempered door glass is not under warranty.
• The heating time of the steam room is dependent on the thermal resistance of the wall materials, room size and power of the sauna stove. The outer surfaces of the sauna stove are hot during heating. Contact with exposed body parts can cause burns.
• Do not splash salt water onto the sauna stove.
• It is not advisable to throw hard water or water with a high iron content onto the sauna stove.

Maintenance

• For safe operation of the furnace, it is advisable to keep cleaning accessories (shovel, broom, rake) in the lower temperature (below 104°F / 40°C) part of the steam room.
• Empty the sauna stove’s ash tray before each heating since this is used to adjust the draught
• If the sauna has not been used for a long time, have a specialist check the furnace, grate and ash tray condition before heating the sauna stove. If necessary, arrange for the condition of the chimney and the f1ue to be checked as well. Also, if necessary, allow the specialist to undertake further cleaning.
• Large temperature fluctuations may over time, cause the sauna stove stones to crumble and lose their required properties. It is therefore advisable to replace crumbled sauna stones with new ones once a year.
• Clean the heating surfaces of the sauna stove regularly, at least once every 20 uses.
• At least once a year, it is necessary to clean the chimney and f1ues.
• Cleaning of the sauna stove must comply with al I local normative documents which provide fire safety regulations for the cleaning of furnaces.

WARRANTY

Buyer is obligated to read user manual and follow instructions and requirements presented. Damage to the product caused by not following instructions and requirements will void warranty. If any defects are found on the product, where manufacturer can be blamed, then buyer has the right to demand fixing or replacing the product. Demands must be made not later than 5 years after buying the product. Purchase receipt needs to be presented when warranty demands are made.

Warranty terms:

• Warranty applies only to heaters that have been used according to the manual.
• The warranty applies to malfunctions caused by manufacturing faults. This warranty does not cover the combined effect of high temperature and water on the sauna stove
• deformation of metal;
• surface coating; door glass.
• NB! Warranty does not cover heating elements. They are considered as consumable parts.
• Warranty does not cover wear that occurs from natural usage.
• Warranty does not cover defects or wear caused by planned use.
• Warranty does not imply when damage or defects are caused by transportation or other actions not controlled by manufacturer.
• product has been damaged by carelessness or overload
• product has not been installed correctly
• product has been modified in any way warranty period is over
• product is not complete
  All demands shall be presented directly to reseller or using e-mail for Canada: canada.support@huumsauna.com or for
  USA: usa.support@huumsauna.com
  Find the latest updates on our website www.huumsauna.com

info@huumsauna.com
www.huumsauna.com  

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>