IDea BASSO24t F400 Dual-12 Inch Compact Band-Pass Multipurpose Subwoofer User Guide
- June 9, 2024
- iDea
Table of Contents
- BASSO24t F400 Dual-12 Inch Compact Band-Pass Multipurpose Subwoofer
- SYSTEM CONFIGURATION AND SETTINGS
- RECOMMENDED SETTINGS
- TECHNICAL DATA
- TECHNICAL DRAWINGS
- WARNINGS AND SAFETY GUIDELINES
- WARRANTY
- DECLARATION OF CONFORMITY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
QuickStart Guide
BASSO24t F400
Dual-12˝ Compact Band-Pass Multipurpose Subwoofer
BASSO24t F400 Dual-12 Inch Compact Band-Pass Multipurpose Subwoofer
Many key factors are to be considered when configuring the subwoofer section
of a loudspeaker system to perfectly match each application: size/weight,
logistic and operational setups, SPL needs, LF extension, cost limitations, as
well as sound engineer preferences (depending on different the type and size
of the event) or audio program
characteristics and regional style taste for subwoofer mixes.
BASSO Series models allow the user to choose the most adequate subwoofer
for any given situation from within a family of products with common finish,
design solutions and performance philosophy as well as shared rigging and
transport accessories.
BASSO24t F400 is a dual 12” band-pass subwoofer with a very shallowform
factor and excellent power-density that make this loudspeaker a versatile tool
for any small, unobtrusive installed sound reinforcement and portable FOH
applications to more powerful, medium-sized configurations for Touring and
Rental companies and theatre and club installations.
SYSTEM CONFIGURATION AND SETTINGS
BASSO 24t F400 back panel is fitted with a pair of Neutrik NL-4 connectors in parallel for straightforward, flexible installation setup.
NL-4 PINOUT:
+/- 1 Subwoofer Signal
+/- 2 Parallel Signal
RECOMMENDED SETTINGS
LPF@ 80 Hz
Type | Freq | Q | Gain |
---|---|---|---|
Bell | 166 Hz | 7.0 | -6.00 |
Bell | 74 Hz | 5.0 | 1.70 |
Bell | 169 Hz | 5.0 | -4.30 |
Bell | 63 Hz | 14.0 | -1.00 |
HPF: | 26 Hz | Butterworth 18dB | |
--- | --- | --- | |
LPF: | 76 Hz | Butterworth 24dB |
LPF@ 100 Hz
Type | Freq | Q | Gain |
---|---|---|---|
Bell | 166 Hz | 7.0 | -6.00 |
Bell | 93 Hz | 7.0 | 2.00 |
Bell | 169 Hz | 5.0 | -4.30 |
Bell | 63 Hz | 13.0 | -0.80 |
HPF: | 26 Hz | Butterworth 18dB | |
--- | --- | --- | |
LPF: | 93 Hz | Butterworth 24dB |
LPF@ 120 Hz
Type | Freq | Q | Gain |
---|---|---|---|
Bell | 166 Hz | 7.0 | -6.00 |
Bell | 105 Hz | 7.0 | 0.50 |
Bell | 169 Hz | 5.0 | -4.30 |
Bell | 63 Hz | 13.0 | -0.80 |
Bell | 240 Hz | 8.0 | -8.00 |
HPF: | 26 Hz | Butterworth 18dB | |
--- | --- | --- | |
LPF: | 117 Hz | Butterworth 24dB |
LPF@ 160 Hz
Type | Freq | Q | Gain |
---|---|---|---|
Bell | 166 Hz | 6.0 | -5.00 |
Bell | 250 Hz | 6.0 | -11.00 |
Bell | 124 Hz | 6.0 | -1.60 |
Bell | 137 Hz | 5.7 | 1.40 |
Bell | 63 Hz | 13.0 | -0.80 |
Bell | 250 Hz | 4.0 | -1.80 |
HPF: | 26 Hz | Butterworth 18dB | |
--- | --- | --- | |
LPF: | 165 Hz | Butterworth 24dB |
TECHNICAL DATA
Enclosure design | Band Pass |
---|---|
Transducers | 2 x 12’’ |
Power Handling (RMS) | 1.4 kW |
Nominal Impedance | 4 Ohm |
SPL (Continuous/Peak) | 129/135 dB SPL |
Frequency Range (-10 dB) | 44 -83/100/118/160 Hz |
Frequency Range (-3 dB) | 52 – 103/125/143/174 Hz |
Dimensions (WxHxD) | 416 x 600 x 750 mm (16.4 x 23.6 x 29.5 in) |
Weight | 48.4 kg (106.7 lb) |
Connectors
+/-1
+/-2| 2 x Neutrik speakOn NL-4 in parallel
Input
Link
Cabinet Construction| 15 mm Plywood
Grille| 1.5 mm perforated weatherised steel with protective foam
Finish| Durable IDEA proprietary Aquaforce paint coating process
Handles| 4 integrated handles
Feet/Skates| 4 rubber feet
Installation| 36 mm Pole mount socket
Accessories| Flying frame (RF-EVO55)
Stack frame (RF EVO55 STK)
RS-BASSO-M Rigging structure (optional) 35 mm Pole (K&M-21336)
TECHNICAL DRAWINGS
WARNINGS AND SAFETY GUIDELINES
- Read this document thoroughly, follow all safety warnings and keep it for future reference.
- The exclamation mark inside a triangle indicates that whatever repairing and component replacement operations must be done by qualified and authorized personnel.
- No user serviceable parts inside.
- Only use accessories tested and approved by IDEA and supplied by the manufacturer or an authorized dealer.
- Installations, rigging and suspension operations must be done by qualified personnel.
- Only use accessories specified by IDEA, complying with maximum loads specifications and following local safety regulations.
- **** Read the specifications and connection instructions before proceeding to connect the system and use only cabling supplied or recommended by IDEA. Connection of the system should be done by qualified personnel.
- Professional sound reinforcement systems can deliver high SPL levels that may result in hearing damage. Do not stand close to the system while in use.
- Loudspeaker produce magnetic field even while they are not in use or even when disconnected. Do not place or expose loudspeakers to any device that is sensitive to magnetic fields such as television monitors or data storage magnetic material.
- Disconnect the equipment during lightning storms and when it is not to be used for a long time.
- Do not expose this device to rain or moisture.
- Do not place any objects containing liquids, such as bottles or glasses, on the top of the unit. Do not splash liquids on the unit.
- Clean with a wet cloth. Do not use solvent-based cleaners.
- Regularly check the loudspeaker housings and accessories for visible signs of wear and tear, and replace them when necessary.
- Refer all servicing to qualified service personnel.
- This symbol on the product indicates that this product should not be treated as household waste. Follow local regulation for recycling of electronic devices.
- IDEA declines any responsibility from misuse that may result in malfunction or damage of the equipment.
WARRANTY
- All IDEA products are guaranteed against any manufacturing defect for a period of 5 years from date of purchase for acoustical parts and 2 years from date of purchase for electronic devices.
- The guarantee excludes damage from incorrect use of the product.
- Any guarantee repair, replacement and servicing must be exclusively done by the factory or any of authorized service centres.
- Do not open or intend to repair the product; otherwise servicing and replacement will not be applicable for guarantee repair.
- Return the damaged unit, at shipper’s risk and freight prepaid, to the nearest service centre with a copy of the purchase invoice in order to claim guarantee service or replacement.
DECLARATION OF CONFORMITY
I MAS D ELECTROACÚSTICA SL
POL. A TRABE 19-20 15350 CEDEIRA (GALICIA – SPAIN)
DECLARES THAT: BASSO24T F400
COMPLIES WITH THE FOLLOWING EU DIRECTIVES:
ROHS (2002/95/CE) RESTRICTION OF HAZARDOUS SUBSTANCES
LVD (2006/95/CE) LOW VOLTAGE DIRECTIVE
EMC (2004/108/CE) ELECTRO-MAGNETIC COMPATIBILITY
WEEE (2002/96/CE) WASTE OF ELECTRIC AND ELECTRONIC EQUIPMENT
EN 60065: 2002 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS. SAFETY REQUIRE-
MENTS.
EN 55103-1: 1996 ELECTROMAGNETIC COMPATIBILITY: EMISSION
EN 55103-2: 1996 ELECTROMAGNETIC COMPATIBILITY: IMMUNITY
https://www.ideaproaudio.com/product-detail/basso24t-f400/
For further information scan the QR Code
or refer to the following web address: www.ideaproaudio.com/product-
detail/basso24t-f400
IDEA is always in pursuit of better performance, greater reliability and
design features.
Technical specifications and minor finish details may vary without notice in
order to improve our products.
©2022 – I MAS D Electroacústica SL
Pol. A Trabe 19-20 15350 Cedeira (Galicia – Spain)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>