DAKOTA MICRO DM-BLNM Camera to BNC DVR-Monitor Adapter Cables User Manual

: June 9, 2024
: DAKOTA MICRO

Table of Contents

Product Parts Description
Cable Specifications
Cable Connectors
Installation Instructions
Consumer Limited Warranty
Customer Support Center
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DAKOTA MICRO DM-BLNM Camera to BNC DVR-Monitor Adapter Cables User Manual

Product Parts Description

DM Part Number(s)	Description(s)
DM-BLNM	Balun that converts an Ethernet cable to a BNC female connector on a

DVR or Monitor
DM-CBLNF| Balun that allows for a single AgCam®/EnduraCam®/RazerCam™ camera to an Ethernet cable

Always read the manual prior to operating this equipment. Also, please follow all safety signs and precautions.

Cable Specifications

Description| Allows for the input of one (1) AgCam®/EnduraCam®/RazerCamTM camera into a BNC DVR/Monitor.
---|---
Part Numbers| DM-BLNM & DM-CBLNF
Cable Length| 14.5 Inches
Compatible Monitors| BNC DVR/Monitor
Compatible Cameras| AgCam /EnduraCam1RazerCarnTm
Monitor Inputs| 1
Camera Inputs| 1
CVBS or AHD Compatible| CVBS or AHD
NTSC or PAL Compatible| NTSC or PAL
Warranty Period| 1 Year

Cable Connectors

DM-BLNM
- A. Balun (to RJ45)
- B. Power Input
- C. BNC Male
DM-CBLNF
- A. 5-Pin Female Switchcraft Connector (to Camera)
- B. Balun (to RJ45)

Installation Instructions

DM-BLNM
Plug Part A of the DM-BLNM into the RJ45 connector on the Ethernet Cable.
Plug Part B into the Power Source.
Plug Part C into the BNC Female on the DVR or monitor.
DM-CBLNF
Plug Part A of the DM-CBLNF into the Dakota Micro Camera.
Plug Part B into the other RJ45 Connector on the Ethernet Cable.

Consumer Limited Warranty

Subject to the disclaimer, limitations and other directions stated hereafter, Dakota Micro, Inc. warrants that the Product will be free from defects in material and workmanship for periods as stated hereafter from the date o original purchase. THIS WARRANTY IS EXPRESSLY MADE IN LIEU OF ANY AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANT ABILITY OR FITNESS. THE EXCLUSIVE REMEDY OF THE BUYER IS LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT. EXCEPT AS STATED IN THIS WARRANTY, DAKOTA MICRO, INC. SHALL NOT BE LIABLE FOR ANY LOSS, INCONVENIENCE, OR DAMAGE, INCLUDING DIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, RESULTING FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER RESULTING FROM BREACH OF WARRANTY, NEGLIGENCE, STRICT LIABILITY OF ANY OTHER LEGAL THEORY. Any oral statements or representations made by anyone which are contrary to or at variance with the terms stated in this LIMITED WARRANTY are void.

Dakota Micro, Inc. will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period of three (3) years for AgCam® /EnduraCam® and InnoPro® cameras; two (2) years for AgCam®/ EnduraCam® monitors, and Wireless components; Twelve (12) Months for all Overview® and RazerCam™ Cameras & Monitors, cables and all other accessories.

The Dakota Micro, Inc. limited warranty periods outlined above apply throughout the United States and Canada only. A one (1) year maximum limited warranty for all Products applies to all other geographic locations unless otherwise stated in writing by Dakota Micro, Inc.

This limited warranty does not apply to any issues connected with appearance that have no relation to the performance of the Product nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction.

In order to enforce the rights under this limited warranty, the purchaser should follow the process set forth in the Product Warranty/Repair Process, and provide proof of purchase to Dakota Micro, Inc.

Neither the sales personnel of Dakota Micro, Inc. nor any dealer or any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time periods described herein.

The warranties described herein shall be the sole and exclusive warranties and remedies provided by Dakota Micro, Inc. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Dakota Micro, Inc. to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims. In no event shall Dakota Micro, Inc. be liable or in any way responsible for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than Dakota Micro, Inc.

Some states do not allow the limitation or exclusion of incidental or consequential damages, so said limitation may not apply to you.

Any action at law, suit in equity, or other judicial proceeding for the enforcement of any right provided for herein or otherwise, or with respect to any claim that a purchaser may have against Dakota Micro, Inc. shall be instituted only in the Courts of the State of North Dakota, either in the state district court located in Wahpeton, North Dakota or in Federal District Court located in Fargo, North Dakota. Without regard to conflicts of law principles, the laws of the state of North Dakota shall govern the interpretation and enforcement of the terms of this Limited Warranty and all aspects of the relationship between Dakota Micro, Inc., and the purchaser.

This warranty gives you specific legal rights and you may also have other rights, which may vary from state to state.