KOHLER K-25042-SS Modflex Flushometer Bowl with Top Spud Instruction Manual
- June 9, 2024
- Kohler
Table of Contents
K-25042-SS Modflex Flushometer Bowl with Top Spud
Instruction Manual Modflex® Adjust-a-Bowl®
flushometer bowl with top spud
K-25042-SS
Features
- Elongated bowl offers added room and comfort.
- Siphon jet.
- 1.28 or 1.6 gpf (4.8 or 6.0 lpf) depending on flushometer specified.
- 10-1/2″ x 7-1/2″ (267 x 190 mm) water surface.
- Minimal design detail and partially concealed skirt for ease of cleaning.
- Easy-to-clean low-profile bolt caps.
- Pair with KOHLER® flushometers and seats for a complete solution.
- Supports static load of 2,500 lbs.
- Antimicrobial finish inhibits the growth of mold-, mildew-, stain-, and odor-causing bacteria on the fixture surface.
- This product does not protect users against bacteria, viruses, or other disease organisms.
- Always clean and wash this product thoroughly before and after each use.
- 1-1/2″ (38 mm) top spud.
Material
· Vitreous china.
Technology
- Wall-to-floor toilet conversion solution, perfect for healthcare or any other facility interested in addressing load concerns.
- Eliminates need for a gut renovation to remove in-wall carrier and outlet and install new floor outlet.
- Adjustability allows toilet to attach to outlet of the horizontal branch, even if positioned next to the vertical stack.
- Engineered for strong flush performance in buildings with lower water pressure or flow.
- Design eliminates gas leaks, splashing and paper shredding.
Installation
- Floor-mount.
- Included brackets attach to wall carrier and secure bowl to both wall and floor.
- Designed to cover existing footprint of any wall bowl on the market.
- Adjustable connector enables replacement of wall-mount bowls with rim heights from 15″ to 18″.
ADA/CSA B651/Obc
Codes/Standards
ASME A112.19.2/CSA B45.1
DOE – Energy Policy Act 1992
EPA WaterSense®
California Energy Commission (CEC)
ADA
ICC/ANSI A117.1
CSA B651
OBC
KOHLER® One-Year Limited Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
| Color | Code | Description |
|---|---|---|
| 0 | White | |
| 96 | Biscuit | |
| 47 | Almond |
Technical Information
All product dimensions are nominal.
| Toilet type: | Flushometer, Floor-mount |
|---|---|
| Waste Outlet: | Wall |
| Bowl shape: | Elongated |
| Flush type: | Flushometer valve siphon |
| Spud size: | 1 1/2, Inlet, Top |
| Trap passageway: | 2-1/8″ (54 mm) |
| Water Consumption | |
| Full: | 1.6 gpf (6 lpf) |
| Reduced: | 1.28 gpf (4.8 lpf) |
| Water surface size: | 10-1/2″ x 7-1/2″ (267 mm x 191 mm) |
| Rim to water | 5-3/4″ (146 mm) |
| surface: | |
| Rough-in: | 5″ (127 mm) |
| Seat-mounting holes: | 5-1/2″ (140 mm) |
Fixture Supply Requirements
Min static pressure: 35 psi (241.3 kPa)
Notes
Install this product according to the installation instructions.
For back-to-back toilet installations: Use only a 45° double wye fitting.
This product is designed for a floor-mount installation with a wall-outlet.
ADA, OBC, CSA B651 compliant when installed to the specific requirements of
these regulations.
Plumbing codes may require elongated toilets and elongated, open-front seats
in public bathrooms.
Accessibility standards may require controls to be located on the open side of
the toilet.
1-800-4KOHLER
(1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product
specifications.
For the most current Specification Sheet, go to
www.kohler.com.
3-23-2022 05:04 – US/MX