Rebel URZ1227-3 Outdoor Power Socket with Remote Control User Manual
- June 9, 2024
- Rebel
Table of Contents
Rebel URZ1227-3 Outdoor Power Socket with Remote Control
SAFETY INSTRUCTIONS
Please read this operation instruction carefully before use, and keep it for future reference.
- Protect this product from moisture. Avoid using/storing it in extreme temperatures and high humidity. Do not expose it to direct sunlight and other sources of heat.
- The device is intended for indoor use only.
- Keep the device out of the reach of children.
- Disconnect from the power outlet if the device is not going to be used for a long time.
- Use only authorized accessories.
- Do not attempt to repair this device yourself. In case of damage, contact an authorized service point for a check-up or repair.
- Always disconnect the product from the power outlet before cleaning.
- Clean the device with a soft, dry cloth. Do not use any chemical agents to clean this device.
- Devices range may be decreased if placed near other electronic devices.
- Do not plug to the socket appliances with a current higher than 4,35 A (about 1000 W).
- To work correctly, the device needs proper ventilation.
- This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
- Keep new and used batteries away from children.
- If the battery compartment does not close securely, stop using the product and keep it away from children.
- If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
- Risk of fire or explosion if the battery is replaced by an incorrect type.
PRODUCT DESCRIPTION
- Socket
- Two-pin earthed socket
- Remote control
- Activity indicator
- ON/OFF buttons
PAIRING REMOTE CONTROL WITH SOCKET SWITCH
Before using the device for the first time, you need to pair the appropriate
row of buttons on the remote control with the switch socket. To do this:
- insert the plug of the socket into the power socket; the red indicator light will flash on the device, which means it is ready for pairing
- on the remote control, press the button from the ON column of any row (A, B, C or D)
- the correct pairing will turn on the continuous light of the indicator on the socket To pair more sockets with the remote control, repeat the procedure using the ON button in a row other than the one currently occupied. To unpair an outlet:
- remove them from the main outlet and plug them back in – pairing mode will start.
- then press the OFF button on the remote control in the row corresponding to the pairing letter you want to delete
- the socket will go back to the pairing mode
OPERATION
- Connect the socket switch to the power supply socket.
- Connect the external device to the socket switch.
- Press the ON button on the remote control to turn on the corresponding socket accordingly.
- Press the OFF button on the remote control to turn off the corresponding socket.
CLEANING AND MAINTENANCE
Caution! Risk of electric shock.
- Prior to cleaning, disconnect the device from the power main socket.
- Make sure that no liquid gets into the device. The liquid inside the device may lead to a short circuit.
- Do not use any abrasives or chemical agents to clean this device.
- Clean the device with a soft, slightly damp cloth.
- Make sure the device is completely dry before the next use.
- Check battery level regularly..
SPECIFICATION
- Protection class: IP44
- Maximum power: 1000 W
- Remote control range: up to 25 m
- Remote control frequency: 433,92 MHz
- Battery: 1x CR2032 3 V
- Power supply: 230 V AC / 50 Hz
- In the set: Remote control with batteries, 1 switch
LEARN MORE
For more information on this device visit:
www.rebelelectro.com.Read owner’s manual
carefully before using your device. Visit
www.rebelelectro.com website for more products
and accessories. Lechpol Electronics Leszek Sp.k. hereby declares that the
Power socket with remote control URZ1227-3 is consistent with directive
2014/53/UE. The full text of the EU Declaration of Conformity is available at
the following Internet address: www.lechpol.pl.
Disposal
Correct Disposal of This Product (Waste Electrical & Electronic
Equipment)
(Applicable in the European Union and other European countries with separate
collection systems) This marking shown on the product or its literature
indicates that it should not be disposed of with other household wastes at the
end of its working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from other types
of waste and recycle it responsibly to promote the sustainable reuse of
material resources. Household users should contact either the retailer where
they purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe recycling.
Business users should contact their suppliers and check the terms and
conditions of the purchase contract. This product should not be mixed with
other commercial wastes for disposal.