BERNSTEIN C30 Wireless Charger User Manual
- June 9, 2024
- BERNSTEIN
Table of Contents
BERNSTEIN C30 Wireless Charger
CAUTION
- Before charging compatible mobile phones, remove all objects from the charging area, including phone cases, sockets, coins, keys, rings, staples, paper clips, RFID cards, credit cards and other metal objects. Metal objects on or near the load area can become hot and cause burns.
- Make sure the surface is free of dust and other dirt particles before charging.
- Wireless charging is temperature sensitive. Do not use or store the product outside the temperature ranges specified for it. Do not store the product in high temperature environments and protect it from intense sunlight or other heat sources. Keep the product away from fire and open flames.
- Do not disassemble the product or attempt to convert or modify it in any way.
- The product is intended for domestic, office and other indoor use only. Do not use near medical or industrial equipment or on board an aircraft.
- DO NOT USE THIS PRODUCT IF YOU HAVE A PACEMAKER OR MEDICAL IMPLANT.
- Wireless charging may affect the function of pacemakers and other medical implants. other medical implants.
ACCESSOIRES
NOTICE
- The charger does not work at close range.
- The tabletop thickness must be at least 13 mm (0.51“) and no more than 30 mm (1.18“) thick.
- Please use the original adapter or QC.3.0 adapter.
- Please make sure your phone case is flat and there are no metallic objects in the charging area when using this product.
STEP 1
Look for a suitable position for the charger on the surface. Measure the
distance to the edges of the surface.
STEP 2
Locate the same place below the surface. Align one positioning magnet with
the white circle in the centre of the table sticker and place the other two
magnets on the underside of the table. Ensure that there is sufficient space
for mounting the charger and adjust the position if necessary.
STEP 3
Use the supplied bracket with adhesive sticker to mount the charger. Clean and
dry both surfaces and remove the 3M strips before sticking.
STEP 4 Place the charger face up in the groove of the holder and push it to the lowest point.
STEP 5
Plug in the power cable and QC3.0 adapter.
PRODUCT INFORMATION
- Input: 1 2 V 1 .5A
- Max. wireless output power 10W
- Charging distance: 13 mm to 30 mm (0.51“-1.18“)
- Qi compatible devices
- Size: ø112 x 12mm
- Operating Temperature: 32°F to 95°F (0°C to 35°C), humidity 10 to 90% Storage
- Temperature: -4°F to 176°F (-20°C to 80°C), humidity 5 to 95%
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>