BMi MERCHANDISE Stereo Wireless Headphones User Guide
- June 9, 2024
- BMi MERCHANDISE
Table of Contents
BMi MERCHANDISE Stereo Wireless Headphones
CHARGING THE HEADPHONE
Charge the headphone before 7 using it for the first time.
Plug in the cable to the micro V USB port and charge for at least 2.S hours
Connect the charging cable to charging part
PAIRING YOUR HEADPHONE
Your headphone will work best if it is within 30 ft. of your smart device. You may experience sound briefly cutting off if you are out of range or if your wireless connection is weak Make sure Bluetooth is enabled on your smart phone or tablet before starting the pairing process. STEREO
PAIRING YOUR HEADPHONE (continued)
Make sure the headphone is turned off before attempting to pair it with a smart phone or tablet. Press and hold the “Play/Pause” button to turn on the headphone.
press and hold the button From your smart phone or tablet, find a list until you see the light flash of nearby devices and choose “BMl-985BT”. red and blue. This indicates Enter ,,0000~ if asked. The headphone will that your headphone is Mbeepn when pairing is complete!ready to pair.
CONNECTION LOST?
- If pairing the headphone does not work, turn off the headphone and repeat the steps again in “Pairing your Headphone.”
- Make sure your headphone is within range of your smart device.
- If you hear a long beep, you need to recharge your headphone. Connection may be lost due to law battery.
- When charging your headphones, only use the enclosed USB cable.
MEDIA KEY FUNCTIONS
Press & Hold – Press Once- Ml Turn device on/off Reject an incoming call Play/
Pause music
Press & Hold – Press Once- Increase volume Next Track ..
Press & Hold – Press Once- Decrease volume Previous Track
SPECIFICATIONS
Bluetooth Version: 5.0
Wireless Distance: Up to 33ft (10ml
Play Time: Up to 5-7 hours
Talk lime: Up ta 5-7 Hours
Standby Time: Up to 100 Hours
Battery Capacity: 250 mAh
Charging Time: Up to 2.5 Hours
FCC ID: 2AANZ985BT
BT ID: D059694
WARRANTY
This product is covered by a 3 month limited manufacturer’s warranty. Contact
us if you have any problems at support @dglusa.com.
WARNING
Keep away from water and moisture.
Keep away from heat sources.
Do not disassemble.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) Thisdevice may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Please note that changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
FCC INSTRUCTIONS FOR A CLASS B DIGITAL DEVICE OR PERIPHERAL
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to providereasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.