SleekStrip SleekGrip Premium Rose Gold x Coral Braid User Manual
- June 9, 2024
- SleekStrip
Table of Contents
SleekStrip SleekGrip Premium Rose Gold x Coral Braid
IN THE PACKAGE
SleekGrip-Premium X1
Optional Glass Auxiliary Film X1
(For glossy glass ONLY. Not suitable for matte glass surface!)
Optional Silicone Adhesive X1
Additional 3M Adhesive X1
INSTALLING
Before installation, please make sure to clean the mounting surface.
CAUTION
- SleekGrip CANNOT adhere well to fabric and matte glass surfaces.
- For glossy glass Surface, must use the optional Glass Auxiliary Film before attaching SleekGrip.
- For silicone surface, must use the optional Silicone Adhesive before attaching SleekGrip.
- When removing SleekGrip, weak/fragile/delicate surface such as leather might be damaged. Use at your own discretion.
Stick SleekGrip on the left or right side of the phone according to your preference.
CAUTION
- If your phone is equipped with wireless charging capability, please stick SleekGrip less than 7mm from the phone edge to avoid blocking the wireless charging coil in the phone.
- Burn risk: Placing SleekGrip too close to the center of the phone (where the wireless charging coil is located) may cause SleekGrip to become hot during wireless charging.
Adhesiveness:
50% of full strength in 20 min; 90% of full strength in 24 hours; 100% in 3
days. Please wait at least one day before use.
REMOVING
- Use a plastic card to separate SleekGrip from the mounting surface. DO NOT use sharp metal such as knife as it can cause injury or damage to your phone.
- About half way through, rotate SleekGrip horizontally until it comes off the mounting surface completely. DO NOT pull up SleekGrip vertically. Doing so could damage the back panel of your phone.
HOW TO USE
- OPEN
- USE
- CLOSE
- COMPATIBLE WITH MOST CAR MOUNTS AND WIRELESS CHARGERS
SPECS
- Materials: Zinc alloy, Steel, PU leather
- Weight: 12g
WARRANTY
For warranty and return policy, please visit: www.sleekstrip.com/return-
policy-warranty This
warranty does not cover problems that result from abuse, accident, or misuse.
It does not cover uses not in accordance with the instruction manual. It does
not cover the commercial use of the product. In no event shall school Design
Products Inc. be liable for any direct, indirect, punitive, incidental, or
special consequential damages whatsoever arising out of or connected with the
use or misuse of its products. Due to the variety of glass and silicone, We
cannot guarantee 100% adhesion of the auxiliary patch to all glass and
silicone materials. Please use with caution. Be sure to follow the
instructions when installing SleekGrip. Wireless charging is also affected by
the thickness of phone case and wireless charger’s charging distance.
Designed by
© iQOOL Design Products Inc. Canada
Manufactured in China
Patent granted in the U.S., Canada and other countries. SleekStrip® is a
trademark of iQOOL Design Products Inc., registered in the U.S. and other
countries.
Video User Guide
www.sleekStrip.com @sleekstrip
sleekstripofficial Customer Support
s[email protected] Sales Inquiry [email protected]