LUCIDE 5411212271730 Carlyn Bathroom Wall Light Installation Guide

: June 4, 2024
: LUCIDE

Table of Contents

LUCIDE 5411212271730 Carlyn Bathroom Wall Light
General
Specifications
TECHNICAL DRAW ING & DIMENSIONS
INSTALLATION DRAW ING SPECIFICATIONS
Safety Instructions for bathroom items
Explanation of the symbols which can appear on the fixture
Warranty declaration:
ABOUT COMPANY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LUCIDE 5411212271730 Carlyn Bathroom Wall Light

General

Dimensions L x W x H: 12,5cm x 12cm x 25cm
Main material: Aluminum
Ceiling rose material: Aluminum
Color: W hite
Style: Modern
Shape: Rectangle
Weight: 1,12kg

Specifications

Dimmable: No
Light direction: Around (Diffuse)
Adjustable in height: Not In Height
Adjustable Directional: Not Directional
Cable: No Cable On Product
Sensor: Without Sensor
Control: Light Switch Control
Power supply: Adapter/ Power Grid
IP-Class: 54
Electric Class: 2
Number of light sources: 1
Lamp socket: E14
Maximum wattage: 6W
Power requirements: 220 -240 V~50 Hz
Warranty: 2 Years
For more specifications of this product please visit: www.lucide.com

TECHNICAL DRAW ING & DIMENSIONS

Installation of items in bathroom:

LUCIDE 5411212271730 Carlyn Bathroom Wall Light-fig3

INSTALLATION DRAW ING SPECIFICATIONS

LUCIDE 5411212271730 Carlyn Bathroom Wall Light-fig4

Safety Instructions for bathroom items

Safety Instructions for bathroom items.
Please read this notice carefully and keep it during the lifetime of this product. Follow the instructions for a safe and correct installation and functioning of the light fixture. The manufacturer does not accept any responsibility for damage caused by improper installation and service. Installation should always be done by a qualified electrician.
Always isolate the power before commencing installation, maintenance or repair.
In case of doubts, please contact a qualified electrician.
Please pay attention to locations where the item can be installed (indoor, outdoor, bathroom (for outdoor and bathroom installation, please see further). Indoor items cannot be used in humid places. Do not put the item in contact with water or any liquids or inflammable products. Always respect the minimal distance (indicated on the light) to inflammable products.
During installation, make sure that the cables will not be squeezed or damaged by sharp edges. If the external flexible cable is damaged, it needs to be replaced exclusively by the manufacturer, his service agent, or a qualified electrician.
This is to avoid all risks.
Because the temperature of the item and the bulbs can get very high, they must cool down before being touched. Always use the correct bulb (respect type and maximal wattage as indicated on the product).

Explanation of the symbols which can appear on the fixture

This item is only suitable for indoor use, exclusive bathroom. (except if a higher IP degree permits that the item can be used in the bathroom).
Legislation requires that all electrical and electronic equipment must be collected for reuse and recycling. Electrical and electronic equipment marked with this symbol indicating separate collection of such equipment must be returned to a municipal waste collection point.
Class I: The item has an earth connection. The earth wire (green-yellow) needs to be connected to the earth connection (marked with this symbol).
Class II: The item is double insulated and must not be connected to the earth wire.
Class III: The item is only suitable for lower voltage supply and must not be connected to the earth wire.
IP 21 : protection against dripping water
IP 44 : Splash proof
IP 54 : Dust protected and splash proof
IP 65 : Dust-tight and protected against water jets
If the protection glass is damaged or broken, it needs to be replaced immediately.
Please respect the minimum distance from the bulb to inflammable objects.

Warranty declaration:

Lucide NV warrants that the products supplied will be free from defects in material and workmanship for a period of 2 years from the date of purchase by the end user, if the item is installed and maintained properly as mentioned in the user manual.
Exclusions for the warranty:

Broken glass parts of the fixture will only be replaced within 14 days after purchasing by the end user.
Normal wear and tear, discoloring as a result from normal use.
Damage caused by external causes like fire, water, wrong use/ installation or maintenance of the product. For warranty claims the customer needs to hand over defective fixture/part and the original purchase ticket.

Further explanations can be found on our website.www.lucide.com