GRANBERG 102.9500 Work Gloves User Manual
- June 9, 2024
- GRANBERG
Table of Contents
102.9500 Work Gloves
User Manual
102.9500 Work Gloves
Working gloves made of A/B-quality cowhide split leather.
Cotton back of the hand. Palm lined and with rubberized safety cuff.
Storage/Transport: The gloves are first packed in plastic bags which are
subsequently packed in cardboard boxes for transport and storage. Granberg
recommends storing unused gloves in original packaging. Prevent direct
sunlight.
Maintenance/Cleaning: Leaving the gloves in a contaminated condition may cause
a deterioration of quality.
Cleaning or disinfecting the gloves may also negatively affect quality. The
performance characteristics of gloves that have been worn or
cleaned/disinfected/laundered may differ from the performance levels
declared.
Obsolescence: Service life depends on application and maintenance and cannot
be specified. It is the responsibility of the user to ascertain the
suitability of the gloves for the user’s task or tasks.
Please note: Inspect the gloves for damage before use. The gloves shall
not be worn when there is a risk of entanglement with moving parts of
machines.
Gloves meeting the requirement for resistance to puncture may not be suitable
for protection against sharply pointed objects such as hypodermic needles.
Gloves containing latex may cause allergic reactions in case of
hypersensitivity to latex. Seek medical advice if applicable. None of the raw
materials used in glove, or process of manufacturing it, are known to be
harmful to the user. These gloves are intended to protect hands in working
environments in accordance with EN 388:2016 and EN 420:2003+A1:2009. It is
the responsibility of the user to evaluate and determine risks based on the
intended application. The gloves should only be used for applications declared
suitable by the manufacturer.
Risk should be evaluated keeping in mind the protection levels and the
harmonized standards on which gloves are tested. The results of the tests
should help in glove selection, however it must be understood that actual
conditions of use cannot be simulated and it is the responsibility of the
user, not the manufacturer, to determine glove suitability to the intended
use. Further information may be obtained from manufacturer.
This product is classed as Category II Personal Protective Equipment (PPE)
according to PPE Regulation (EU) 2016/425 and has been shown to comply with
this Regulation through the Harmonised Standards EN 420:2003+A1:2009, EN
388:2016.
Notified Body responsible for certification (Module B):
Name: SATRA Technology Europe Ltd.
Address: Bracetown Business Park, Clonee, Dublin D15 YN2P, Republic of
Ireland.
Notified Body No: 2777
Declaration of Conformity can be obtained from
https://www.granberg.no/catalog/102.9500
| Glove size | XL | 2XL |
|---|---|---|
| EN 420 size | 10 | 11 |
Wear the products of suitable sizes to provide optimal level of protection and maximum grip. User must only choose the glove fitting the size of her/his hand.
User Manual issue date: 20.06.2022
Granberg AS, Bjoavegen 1442, NO-5584 Bjoa, NORWAY
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>