TREFAN TF-S206 Home Theater Sound Bar System User Guide
- June 9, 2024
- TREFAN
Table of Contents
Home Theater Sound Bar System With HDMi (Arc)
TF-S206 User Guide
Important Safety Instructions
- A strong impact may cause damage to the internal parts of the product. Use caution to avoid impact.
- This product contains small parts which may be a choking hazard. Not suitable for children under age 3.
- This product contains magnetic material.Consult your physician on whether this might affect your implantable medical device.
- To reduce the risk of fire or electrical shock, do not expose this product to rain, liquids, or moisture.
- Do not expose this product to dripping or splashing and do not place objects filled with liquids, such as vases, on or near the product.
- Keep the product away from fire and heat sources. Do not place naked flame sources, such as lighted candles, on or near the product.
- Do not make unauthorized alterations to this product. Only use the mounting hardware supplied with this product.
- Do not mount on surfaces that are not sturdy, or that have hazards concealed behind them, such as electrical wiring or plumbing. If you are not sure about installing the bracket, contact a qualified professional installer.
- Do not place or install the bracket or product near any heat sources, such as fireplaces, radiators, heat registers, or other apparatus that produce heat.
- Do not use chemicals or detergents to clean the product. Clean only with a dry cloth.
Unpacking
Carefully unpack the carton and confirm the following parts are included: Package Contents
- Sound bar
- Remote Control
- Optical Cable
- DC Adapter
- User Guide
- 3.5mm Audio Cable
- HDMI Cable
- AAA Battery (2)
- Cleaning cloth
Product Overview
Right Panel
Power Button
Short press once to power on when plug in, long press once to power off.
M Mode Button
Press MODE to switch BT/AUX/HDMI/OPTICAL/ USB mode.
VolumeUp
Volume Down
Press to pause
Back Panel Bottom Panel Remote Control
- Power Button
- Mode Button
- Previous song
- Next song
- Play/pause
- Unpair, disconnect the sound bar from connected device
- EQ, change different EQs
- Mute key
- Volume -
- Volume +
Key special instructions:
The previous, next keys are only available on Bluetooth (BT) mode, but other
modes have no effect.
Setup Soundbar
ConnecttheSoundbar
Before using the product, you need to make sure that the product is properly
connected to the power supply.
Step 1: Plug one end of the power cord into the power connector on the
back of the Soundbar. Step 2: Plug the other end of the power cord into
the DC outlet.
Power On/ Off
Stepl:lnserting batteries before using the remote control(AAA batteries x
2).
Step 2: Click the power button on the remote control or right.
Bluetooth Connection
Step1: The device will enter into Bluetooth mode after power on, you will
hear the “bluetooth mode pairing” tone when ready to pair.
Step2: Search the Bluetooth name “Trefan-S206” in the Bluetooth settings
for pairing. a “bluetooth connected” tone will be heard , and the white light
is always on when the pairing is completed. Attention:
On first use, the sound bar will automatically enter into Bluetooth mode after
power on.
In Bluetooth mode, the sound bar will automatically connect to the most
recently paired device.
Optical Connection
Step1: Remove the protective covers on both ends of the supplied optical
cable.
Step2: Connect the digital audio in the optical jack on the sound bar to
the optical out jack of the device with a digital optical cable.
Step3: Press the M button on the right panel of the sound bar or the Mode
button on the remote control to select the optical input. Attention:
when connecting with an optical cable, you need to set the TV’s audio mode to
external devices. At the same time, set the TV’s audio decoding mode to PCM
(Pulse-Code Modulation) mode. The TV menu may differ depending on the TV
manufacturer.
AUX Connection
Step1: Connect AUX IN(audio) on the sound bar unit to the audio out jack of
the device using a 3.5mm audio cable.
Step2: Press the M button on the right panel of the sound bar or the Mode
button on the remote control to select the AUX input. Note: Some devices
require manual setting of the source output signal to Soundbar.
HDMI Connection
Step1: Connect one end of the HDMI cable to the Sound bar
Step2: Connect the other end of the HDMI cable to a device such as a TV
Step3: Press the M button on the right panel of the soundbarorthe Mode
button on the remote control to select the HDMI input. USB Connection
Step1: Plug your USB into the USB interface
Step2: Press the M button on the right panel of the sound bar or the Mode
button on the remote control to select the USB input.
Sound Mode settings
The Trefan sound bar has 3 built-in equalizers. You can select your favorite
sound effects by using the function keys on the remote control.
We have three types of sound effects: [Music], [Talk] and [Movie]. You can
switch between the sound effects using the corresponding graphic buttons on
the remote control.
Place the Soundbar
Put the Sound bar on the Table
You can use the product on the desk of your TV or computer.
Troubleshooting
Q: Why is the unit not turning on?****
– A: Please check and make sure the power cord is correctly connected to a power source.
Q: Why is there no sound or the sound is distorted?****
– A: Please go over the following:
– Check to make sure the audio cable is correctly connected.
– Turn up the volume slowly.
– Press the mute button to switch on the sound.
– Press the play/pause button.
– Set the audio output mode on your TV (if applicable) accordingly with the
mode setting on the sound bar.
Q: Why do the buttons on the sound bar not work?****
– A: Switch off the Sound bar and unplug. Then connect it to a power supply and switch it on again.
Q: Why does the remote control not work?****
– A: Please go over the following:
– Install 2 AAA l.SA batteries into the remote.
– Replace the current batteries with new ones.
– Make sure the remote control is pointed to the sound bar during use.
– Make sure the remote control is within operating range.
– Switch off the sound bar and disconnect the power. Then reconnect and power
it on, try again.
Specification
| Bluetooth | 5.0 |
|---|---|
| Aux in | Support |
| HDMI in | Support |
| USB in | Support |
| Optical Connection | Support |
| Remote Control | Support |
| Driver | 2×2.0″mid |
| Dimension | W16.54 x D4.21 x H2.52 Inch |
Comlpiance
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
Attention: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Comlpiance:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure Statement: To maintain compliance with FCC’s RF Exposure
guidelines, This equipment should be installed and operated with minimum
distance between 20cm the radiator your body: Use only the supplied antenna.
Recycling: To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the sustainable
reuse of material resources. To return your used device, please use the return
and collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.
Customer Service
12-month Warranty Period
Within one year from the date of purchase, we will repair or replace the
product for free if it does not work properly due to the quality of the
product itself.
If you have any questions, please contact us by email freely.
Contact Us
Mail: customerservice@trefan.com.cn
Manufacturer
Name: Ruijin Trefan Technology CO.,L TD
Address: Jinyuan Road, Economic and Technological Development
Zone, Ruijin City, Jiangxi
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>