Spider M1 Infinite Y-axis Laser Engraver User Manual

Spider M1 Infinite Y-axis Laser Engraver

A Letter to Users

Dear users:
Thank you for choosing our product. For the best experience, please read the instructions before operating the machine. Our teams are always ready to render you the best services. Please contact us via the phone number or e-mail address provided at the end when you have any problem.

For a better using experience of our product, you can also learn how to use the engraving machine in the following ways:
View the corresponding instructions and videos in the TF card. Visit the official website www.spider-laser.com to find the relevant software/hardware information, contact details, and operation and maintenance instructions.

Instructions for Use

For engraving and cutting purposes, please allow the workpiece to be exposed to the high-density laser beam which is emitted by the laser engraver. And please follow the instructions below when operating it:

1. It is advisable to run the machine under well-ventilated conditions, as the laser engraver may generate a small amount of fume or gas. It is prohibited to store the machine in areas close to combustible and explosive substances, volatile solvents or sources of heat. Instead, please store it in a well-ventilated, cool and dust-free place.
2. Make sure that only the specific attached power cord rather than other similar power cords is used during installation. And It is prohibited to come in contact with electronic areas with hands or other tools when the machine is connected to a power supply.
3. Clean the laser module with a dry cloth regularly when the power is off. And switch off the machine when it is offline for an extended period of time, and unplug the power cord;
4. Ensure to run the laser at 0°C- 35°C environment temperature. Operation at sub-zero temperatures is prohibited. Also don’t operate the machine in a wet environment or in thunderstorm weather;
5. It is prohibited that any act of touching the moving parts and the laser module at work;
6. Please place a flat object such as an aluminum alloy or stainless steel plate on the workbench before engraving. For these objects can’t be easily penetrated by the laser, this operation will protect your workbench of being engraved. And then you can place the engraving material.
7. Wear goggles to prevent vision damage arising from exposure to the laser spot during laser engraving operation;
8. For avoiding personal injury, children under 12 years old are not allowed to run the machine without an adult tutorial.
9. Put in place fire extinguishers in case of use, and this shall be regularly checked. It is prohibited to keep the machine unattended while it is running;
10. Users should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes. Spider Ml will not be responsible for any violators’ legal liability under any circumstance.

Specification

• Model
  Spider Ml/Spider Ml Pro/Spider Ml Max

• Laser power
  SW/l0W

• Machine size
  100100485(685)mm

• Safety class
  Class l(FDA classification standard)

• Net weight
  3.3kg/3.6kg

• Laser engraving software
  Laser GRBL, LightBurn

• Operation system
  Windows/macOS/IOS/Android

• Format files
  jpeg, jpg, png, BMP, SVG, Dxf

• Input
  100-240V~S0-60Hz

• Types of supporting materials
  Cardboard, wood, bamboo, rubber, leather, fabric, acrylic, plastic, etc.

• Output
  DC 12V,SA

• Range of operation temperature
  0°C~35°C

• Safety certification
  IEC60825, FDA, CE, RoHS, FCC, UKCA, PSE, UL

• Engraving size
  200/400*00

• Laser source
  Semiconductor laser unit

• Laser wavelength
  455±5nm

Parts List

Equipment Introduction

Delicated Frame Installation Guide

The delicate frame supports Spider Ml engraving objects from 200mm to 400m. Please take the below picture for reference. 4 corners are locked with two M4 screws.

Y-axis Rotary Roller Installation Guide

• Step 1: connect Spider Ml with Y-axis rotary roller
• Step 2: turn off the safety switch on the bottom of the Spider Ml
• Step 3: to engrave the desired objects

Spider Ml Operation Instructions

Preparations Before Engraving
Please insert the TF card into the TF card slot before the operation, and plug in the 12V adapter power supply. Then turn on the power switch, and the red light will on. After this Spider Ml will be ready for work. BTW, the TF card that comes with the machine contains the tutorials of LightBurn and Laser GRBL. You can get the relevant informa-tion from the TF card.

Note:
No matter what method you use, please make sure you inserted the TF card before engraving, and use a clean cloth which a cloth dampened with alcohol to wipe the protective lens of the laser module to ensure the best engraving effect.

Four Modes to Operate the Laser Engraver
There are 4 operation modes: type-B real-time operation, mobile app wireless operation, PC web wireless terminal operation, and TF card operation.

1. Type-B real-time working: for real-time working by Type-B, please refer to the tutorial in the TF card.
2. Mobile app wireless operation:

Step 1: connect Wi-Fi first.

• Spider Ml standby interface
• Click setting to connect to Wi-Fi
• Click the Wi-Fi page to select Wi-Fi
• Type in the password to link Wi-Fi
• Get spider Ml device IP

Step 2: Download the MKS Laser app from the Apple app store or Google Play.
Step 3: type in the IP shown on Spider Ml, and make sure that the mobile phone and device are in the same LAN, click Connect in the upper left corner, type in the device IP, click Connect, then return to the home page.

Step 6: engraving parameters setting.

Step 7: set the engraving position.

Step 8: start engraving (after starting engraving, you can exit the APP on your mobile phone or connect it to the terminal, it will not affect the engraving).

PC web wireless terminal operation:

Step 1: view the IP address from spider Ml’s touch screen, type in the IP of Spider Ml laser engraving machine, and enter the working page.

Step 2: move to the engraving position and set the origin.

Step 3: click the SD file, and select the desired engraving file.

Step 4: preview the engraving area and start engraving.

TFCard
Copy the engraving file to the TF card through the card reader, and plug it into the TF card holder of the spider Ml, and then you can start your engraving or cutting.

Step 1: Choose Engraving on screen.

Step 2: choose the desired file.

Step 3: Select the Control.

Step 4: set the position.

Step 5: start engraving.

Exception Handling

Q1: When operating the engraving machine under a wireless environment, the laser engraver cannot be connected, or cannot be operated after connection.
A: First please check whether the engraver is in the same local area network with a PC or mobile phone, then restart the engraving machine, and reconnect to the network.

Q2: The Y-axis is offset during the engraving process.
A: clean the Y-axis roller of the engraving machine, clean the engraving plane, and make sure that the bottom surface of the engraving machine does not scrape the engraving surface.

Q3: The laser performance is obviously declined and the engraving depth cannot be reached.
A: clean the protective lens with a dust-free cloth or replace the protective lens.

WARRANTY

Before returning the product and filling in a warranty, please contact the after-sale person for going through the after-sale formality. And attach this warranty card along with the returned machine.

Note:
The client needs to fill in basic info. and return reasons. Repair records shall be retained for technicians.

Users should abide by the laws and regulations of the country and region where the equipment is located (place of use), abide by professional ethics, and pay attention to safety obligations. It is strictly forbidden to use our products or equipment for any illegal purpose. Our company is not responsible for the relevant legal responsibilities that the violator should bear. Since each model is different, the actual product may be different from the picture. Please refer to the actual product.

The final interpretation right belongs to Shenzhen Sky Electronics Co., Ltd.

• Company: Shenzhen Sky Electronics Co., Ltd.
• Address: Room 508, Block 11, Ping an Ave, No.3, Pinghu Street, Longgang, Shenzhen
• Website: www.spider-laser.com
• Email: cs@spider-laser.com.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

CONTACT INFORMATION

• Company: Shenzhen Sky Electronics Co., Ltd.
• Address: Room 508, Block 11, Ping an Ave, No.3, Pinghu Street, Longgang, Shenzhen
• Website: www.spider-laser.com
• Email: cs@spider-laser.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>