rizoma PE856 Rider Footpegs 8 Positions Mounting Kitktm User Manual
- June 9, 2024
- rizoma
Table of Contents
rizoma PE856 Rider Footpegs 8 Positions Mounting Kitktm
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate you for your excellent choice. Please carefully follow the instructions in this guide, which will allow you to mount and use the product correctly and enjoy all the features it has. For your protection and safety, RIZOMA expressly recommends that you have the installation of the product performed by skilled personnel. Improper installation, repair or maintenance, can cause accidents. Keep this user guide as a reference for the future. RIZOMA accepts no liability for any damage, of any kind, which may be caused, directly or indirectly, to persons or things as a result of incorrect assembly or failure to observe all the assembly instructions. We also invite you to comply with the provisions of the Highway Code and Traffic rules and/or to additional regulations in force in your Country.
Attention
This component comes assembled for shipping purposes only. Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or procedures, which, if not followed, may result in death or serious injury.
-
Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of
your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com). -
For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the
correct functioning of the product. -
After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly
suggest repeating these checks periodically, especially after long trips or prolonged periods of not using the bike.
Your RIZOMA products require regular inspection and maintenance. The more you
ride the more often you must inspect your RIZOMA products. If your products
are leaking,
bent, deformed, cracked, chipped or worn, no matter how slight, immediately
have a RIZOMA dealer inspect the products before you ride again. In any case
never try
to repair or modify the Rizoma products or their components, always replace
them with Rizoma original components.
Rizoma products may not be compatible with your motorcycle or with other
aftermarket equipment installed before. For your, safety Rizoma suggests to
always contact
your RIZOMA dealer.
O.E.M.: original equipment manufacturer.
PART
Consult the website www.rizoma.com, click on the
PE856 page the section “MEDIA”, to download the TUV approval document in PDF
format.
- Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components.
- Verify the operation of the foot brake, the brake light, and the shift lever before riding. Improper installation could lead to loss of function and loss of motorcycle control, resulting in an accident, personal injury or death.
- Jumping, stunt riding and excessive standing will lead to breakage of the rear set controls, resulting in loss of motorcycle control, an accident, personal injury or death.
INSTALLATION
MONTAGGIO ADATTATORE INSTALL ADAPTER
Step 1
WARNING:
INSERT THE OEM SPRING ON THE HOLE OF CHASSIS.
ATTENTION: MOUNT FOR BOTH SIDES.
MONTAGGIO ECCENTRICO INSTALL ADJUSTER
Step 2
WARNING:
ROTATE THE CLOCKWISE OR COUNTERCLOCKWISE THE ADJUSTER TO CHOOSE THE DESIRED
POSITION. FOR THE CORRECT TIGHTENING OF THE SCREW USE SOME GREASE ONLY ON THE
UNDERHEAD OF THE SCREW AND THE THREAD LOCKER MEDIUM LIQUID ON THE THREADS,
AFTER TIGHTENING WITH THE TORQUE WRENCH.
MONTAGGIO PEDIVELLA INSTALL PEG
Step 3
MONTAGGIO PEDIVELLA INSTALL PEG
Step 4
Warnings
RIZOMA reserves the right, in its sole discretion, to make changes to the
product and this information at any time and without prior notice. Although
many catalogs and advertisements depict riders engaged in extreme or stunt
riding, this activity is extremely dangerous, increases the risk of an
accident, and increases the severity of any injury.
The action depicted is performed by professionals under strictly controlled
riding conditions.
Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based in contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy.
All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full-face helmet), that has been approved by ANSI, SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding styles, such as full-finger gloves, boots, and body armor.
Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other component parts installed on your motorcycle. Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.
Legal notes
Some of our products may not be approved for road circulation in the countries where homologation is required. Thus RIZOMA® srl declines any responsibility for different use of its products.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>