GE current ED23.5 Type B LED HID Hazardous Rated Lamp Installation Guide
- June 9, 2024
- GE current
Table of Contents
GE current ED23.5 Type B LED HID Hazardous Rated Lamp
BEFORE YOU BEGIN
Read these instructions completely and carefully. Save these instructions for future use.
CONTACT A QUALIFIED ELECTRICIAN if you are not knowledgeable about
luminaires and electrical systems. This LED Retrofit Kit Installation requires
a familiarity with safety procedures, if not qualified, do not attempt
installation. These products are rated 277-480 V, however in the US it should
only be used on branch
circuits permitted in Section 210.6 of the US National Electrical Code for
E39/EX39 lamp holders.
WARNING
Risk of electrical shock or fire. Before installing this kit in a
luminaire, make sure the luminaire matches the features and dimensions
indicated in the photographs and that the input rating of the retrofit kit
does not exceed the input rating of the luminaire.
WARNING
DO NOT MAKE OR ALTER ANY OPEN HOLES IN AN ENCLOSURE OF WIRING OR ELECTRICAL
COMPONENTS DURING KIT INSTALLATION. Do not expose wiring to edges of sheet
metal or other sharp objects to prevent wiring damage or abrasion.
DO NOT disconnect the existing wires from lamp holder terminals in preparation for new connections. Cut the existing lamp holder terminal wires an appropriate distance from the connection point and use applicable connectors to attach the new wires. THE RETROFIT KIT IS ACCEPTED AS A COMPONENT OF A LUMINAIRE WHERE THE SUITABILITY OF THE COMBINATION SHALL BE DETERMINED BY AUTHORITIES HAVING JURISDICTION. PRODUCT MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN IN ACCORDANCE WITH THE APPLICABLE AND APPROPRIATE ELECTRICAL CODES. THE INSTALLATION GUIDE DOES NOT SUPERSEDE LOCAL OR NATIONAL REGULATIONS FOR ELECTRICAL INSTALLATIONS. ENSURE CURRENTLY INSTALLED LUMINAIRE AND RETROFIT KITS ARE ONLY INSTALLED IN THE SAME HAZARDOUS (CLASSIFIED) LOCATIONS SPECIFIED ON THE RETROFIT KIT MARKING LABEL.
Input Rating
- LED50ED23.5/YXX/277/480/HAZ, 0.20 amps max, 50W
- LED80ED23.5/YXX/277/480/HAZ, 0.32 amps max, 80W
The Kit Includes:
- LED lamp
- Label for modified luminaire
- Installation instructions
- Wire connectors (2)
Luminaire Fittings Reference Table
Luminaire Fitting
- GE Lighting Filtr-Gard®
- Crouse-Hinds Champ®
- VMV Appleton Mercmaster®
- III Appleton Mercmaster®
- II GE Lighting Powr-Gard® H9 Series
- Hubbell Killark® VM Series
- Holophane Petrolux P3M®
- Thomas & Betts Hazlux® 3 Series
Data subject to change. Please scan QR code for latest and detailed installation instruction on a particular luminaire fitting.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>