SeaGull Lighting HC-1573 Herrington 1-Light 10-in Black Outdoor Wall Light Instruction Manual
- June 9, 2024
- SeaGull Lighting
Table of Contents
SeaGull Lighting HC-1573 Herrington 1-Light 10-in Black Outdoor Wall
Light
Important Safety Instructions
- Be sure the electricity to the system you are working on is tamed off; either the fuse removed or the circuit breaker set at oft
- Use of other manufacturers components wall void warranty, listing and create a potential safety hazard.
- If you are unclear as to how to proceed, contact a qualified electrician.
- You don’t need special tools to instal this fixture
- Be sure to follow the steps in the order given.
- Read instructions carefully.
- Save these instructions.
NOTE: This glass is handcrafted, the slight imperfections in the glass
add to the authenticity of the fixture.
NOTE FOR FXTURES THAT ARE SOUD BRASS:
NOTE TO KEEP YOUR SOLID POUSHED BRASS FXTURE LOOKING
NEW FOR YEARS TO COME, REGULARLY APPLY A GOOD QUALITY
NON-ABRASIVE CAR WAX TO ALL METAL SURFACES, GMNG THE
FIXTURE AN EXTRA PROTECTIVE COATING.
BEFORE YOU BEGIN
Carefully remove the fixture from the carton and check that all parts are
included.
Be careful not to misplace any of the screws or part which are needed to
instal this fixture
CLEANING
To dean, wipe fixture with a soft doth. Clean glass with a mild soap
Do not use abrasive materials such as scouring pads or powders, steel wool or
abrasive paper.
ORDERING PARTS
Keep this sheet for future reference, and in case you need to order emplacement parts. Parts for this fixture can be ordered from place purchase. Be sure to use exact wording from lustration when ordering parts.
WET LOCATION
NOTE FOR FXTURES LABELED FOR WET LOCATION AND USED OUTDOORS
CAUTION: To reduce he risk of electrical shock, provide a watertight seal
between the fixture and the mounting surface by using a silicone or similar
caulking.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>