SeaGull Lighting HC-231 Jamestowne Wall Light Instructions

SeaGull Lighting HC-231 Jamestowne Wall Light Instructions

INSTALLATION AND SAFETY INSTRUCTIONS

IIMPORTANT SAFETY INSTRUCTIONS

• Be sure the electricity to the system you are wailing on is turned off; either the fuse removed or the chat breaker art at oft.
• Use of other manutactirets coirponents va wad warmly, Fisting and create a potential sleety hazard.
• If you are unclear as to how to proceed, contact a quailed electrician.
• You don’t need special tools to Instill this Wire
• Be sire to Solo w the steps in the order given.
• Proper raring is essential for the sate operation of this fixtire.
• To reduce the risk of ire, electric shock or personal inyury, moist to o diet box or supporting system able b support the weight of the (Ochre.
• Read instructions carefulty.
• Save these ins-tractions.

WET LOCATION
NOTE FOR FIXTURES LABELED FOR WET LOCATION AND USED OUTDOORS.
CAUTIOtt To reduce the risk of electrical shock, provide a watertight seal between the Inge and the manting surtice by using a silicone a* Earn tar caulking.
NOTE This glass is handcrafted, the slight irnpertecticre in the giass add to the authenttity of the fixtue.
Futues vorth photo-cells 4x: RAIEJ be minted at 10381 48` from al sides to avoid reflection of bght bads alto REED- el, causing the Photo-cell to rnalknclion or flicker.

CLEANNG
To dean, ‘wipe fixtue wrth a soft cloth. Clean glass with a mild sow Do not use abrasive malenais such as soaring pads a powders, sled wod a abrasive paper.
IORDERING PARTS
Keep Iris sreet tar ishre referrnce, and in case you need to cider replacement parts Parts for this fixture can be ordered tram place of purchase. Be are lo use exact wading from Mustraticn when oiderng parts.

(BEFORE YOU BEGIN
STEP 1:
Caretty remove the fixtue tram the carton end check that al parts are included, as shown in Figtse 1. Be email not to misplace any of be screws or parts which we needed to halal this fixtuie.
STEP 2:
r applicable) Thread locp f) to top of fixttre. Thread supplied 08-32 screw through scrcll 46) and backilate (D). Thread suppled hex nut onto bath plate side of 08-32 screw to secure scaxA ta) to baciplate
STEP 3:
Race aid of scroll (G) into loop (F)

Documents / Resources

| SeaGull Lighting HC-231 Jamestowne Wall Light [pdf] Instructions
HC-231 Jamestowne Wall Light, HC-231, HC-231 Wall Light, Jamestowne Wall Light, Wall Light, Jamestowne Light, Light
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>