GRANBERG 116.592 Protector Cut Protection Gloves Instructions
- June 9, 2024
- GRANBERG
Table of Contents
GRANBERG 116.592 Protector Cut Protection Gloves
Introduction
Touch screen compatible, cut level D, seamless knitted gloves made of mixed
yarns with sandy nitrile coating on the palm and fingers. Thumb crotch
reinforcement.
Recommended for work that requires protection against cuts. Provides very good
abrasion, cut, tear and puncture resistance. Offers great comfort and
dexterity. Ideal for precision handling in oily conditions.
Storage/Transport
The gloves are first packed in plastic bags which are subsequently packed in cardboard boxes for transport and storage. Granberg recommends storing unused gloves in original packaging. Prevent direct sunlight.
Maintenance/Cleaning
Leaving the gloves in a contaminated condition may cause a deterioration of quality. Cleaning or disinfecting the gloves may also negatively affect quality. The performance characteristics of gloves that have been worn or cleaned/disinfected/laundered may differ from the performance levels declared.
Obsolescence
Service life depends on application and maintenance and cannot be specified. It is the responsibility of the user to ascertain the suitability of the gloves for the user’s task or tasks.
Please note :
Inspect the gloves for damage before use. The gloves shall not be worn when
there is a risk of entanglement with moving parts of machines. Gloves meeting
the requirement for resistance to puncture may not be suitable for protection
against sharply pointed objects such as hypodermic needles. Product contains
carbon particles. Gloves containing latex may cause allergic reactions in case
of hypersensitivity to latex. Seek medical advice if applicable. None of the
raw materials used in glove, or process of manufacturing it, are known to be
harmful to the user. Do not expose to open flame. If the gloves become wet, do
not use them to handle hot objects. These gloves are intended to protect hands
in working environment in accordance with EN 388:2016+A1:2018, EN 407:2004 and
EN 420:2003+A1:2009. It is the responsibility of the user to evaluate and
determine risks based on the intended application. The gloves should only be
used for applications declared suitable by the manufacturer. Risk should be
evaluated keeping in mind the protection levels and the harmonized standards
on which gloves are tested. The results of the tests should help in glove
selection, however it must be understood that actual conditions of use cannot
be simulated and it is the responsibility of the user, not the manufacturer,
to determine glove suitability to the intended use. Further information may be
obtained from manufacturer.
Customer Support
Abrasion resistance
Burning behavior
This product is classed as Category II Personal Protective Equipment (PPE)
according to PPE Regulation (EU) 2016/425 and has been shown to comply with
this Regulation through the Harmonised Standards EN 420:2003+A1:2009, EN
388:2016+A1:2018, EN 407:2004.
Notified Body responsible for certification (Module B):
Name: SATRA Technology Europe Ltd.
Address: Bracetown Business Park, Clonee, Dublin D15 YN2P, Republic of
Ireland.
Notified Body No: 2777
Declaration of Conformity can be obtained from
https://www.granberg.no/catalog/116.592
| Glove size | XS | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|---|
| EN 420 size | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
Wear the products of suitable sizes to provide optimal level of protection and maximum grip. User must only choose the glove fitting the size of her/his hand. Fit for special purpose.
EN 420:2003+A1:2009
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>