STIRLING 504469 Trailer Tongue Extension for Kit Instruction Manual
- June 9, 2024
- STIRLING
Table of Contents
504469 Trailer Tongue Extension for Kit
Instruction Manual
Tongue Removal
a) Remove the 1/2”-13 x 3 1/2” bolts and nuts from the tongue support plate.
b) Remove the tongue from the tongue connection bracket.
c) Unbolt the ground wire which is mounted on a 3/8”-16 X 2 1/2” bolt.
d) Remove the tongue and place it on a flat surface upside down.
e) Remove the 3/8”-16 X 3” bolts and nuts to disassemble the coupler from the
tongue channel.
f) Disassemble coupler, chain, and tongue support foot to reuse it on the new
tongue.
Tongue Extension Installation
a) Slide tongue support foot into tongue coupler channel first.
b) Insert the 3/8”-16 X 3” bolt and nut into the tongue coupler channel to
hold the chain in place.
c) Assemble the coupler on the tongue coupler channel with the help of 3/8”-16
X 3” bolts and 3/8” nuts.
d) Slide the tongue extension into the tongue connection bracket and align
both holes.
e) Insert the 1/2”-13 x 3 1/2” bolts to hold tongue extension in place and
tighten up with same size nuts.
f) Put ground wire ring terminal on the 3/8”-16 X 3” bolt and tighten up with
nut.
Make sure not to damage ring terminal while tightening up nut
Final Assembly View
Documents / Resources
|
STIRLING 504469 Trailer Tongue Extension for
Kit
[pdf] Instruction Manual
504469 Trailer Tongue Extension for Kit, 504469, Trailer Tongue Extension for
Kit, Tongue Extension for Kit, Extension for Kit
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>