FPY YL-5T Hydraulic Puller Instruction Manual
- June 9, 2024
- FPY
Table of Contents
FPY YL-5T Hydraulic Puller
OPERATION PRINCIPLE
Hydraulic pressure draw horse fill with post in pump as power source to drive horse’s cylinder rod to move ahead. Hook claw fiat can follow the fast regulate nut make the distance of adjusting go backwards to advance directly Lift hand handle swing from head to foot while operating. namely output high- pressure oil make the draw horse’s cylinder rod move forward, Hook claw corresponding to go backwards .the objected Is pulled out.
RANGE OF APPLICATION
Overall puller is an ideal new product to replace for the traditional richetite is of convenient operation. labor-saving use, compact structure. flexible use. light weight. small bulk, handy carry It will not be restricted by any places. It is appUcabfe for the factories and r1epair places.
PERFORMANCE PARAMEJER
Type specification
| YL-ST| YL 10T| YL-20T| YL-30T|
¥L50T
---|---|---|---|---|---
Safety weight
| 5| 10| 20| 30| 50
Effectively axis distance| 50| 60| 60| 60|
60
Max. vertical: distance
| 140| 160| 200| 230| 400
Max Horizontal distance| 200| 250| 3510| 400|
500
OPERATION METHOD
- Oil valve stem screw tighten on deasil first when using.
- Adjust hook claw to claw hook hold the objects.
- Ra se handle hand hole to lift filling pump upper and lower, corresponding to go backwards, claw hook have back and forth Inside to Insert. the object Is pulled out to draw the quilt.
- Cylinder rod form journey once is 80mm for ‘the hydraulic pressure of drawing the horse.so can’t be greater than 60mm while stretching ‘the distance while using, when the work was not pulled out stop In ‘time, lessen the olla valve stem. let ‘the cylinder rod contract beck, the second time repeated 1.2,3step afar setting.
- If want to make cylinder rod contract beck.it only need go back to lessen the right valve stem in counterclockwise direction littlie to littlie the cylinder rod has gone back to contract gradually under the function of the spring.
- Should according ‘lo external diameter of he 0bject,dr1aw distance end load strength, choose corresponding hydraulic pressu1rs of tonnage draw horses before using. Must. guard against overloading to use. Avoid damaging
- Last horse hydraulic 1pressure using In -5 degrees Centigrade-In 45 degree Ce 1tigredes.adopt (C8443-84) by N15 machinery oil, in -2.0 degrees Centigrade -in -5 degrees Centigrade .adopt (CB442- 64) format the spindle oil.
- In order to prevent to cause machines damage for overload, hydraulic setting set up overload to unload valve automatically. when ‘the object at exceeding specified load, hydraulic pump will overflow on au somatically, work piece will don’t retreat and enter. should reelect with large hydraulic pressure of tonnage draw hors, east this moment.
- While the customer are using, because of quality truly balding causes or uses abnormalities, according to the involve, our factory eke care of charge in one month, the Implement three guarantees in one vear.