CISCO Configure Emergency Responder and Intrado V9-1-1 Enterprise Services User Guide

CISCO Configure Emergency Responder and Intrado V9-1-1 Enterprise

Services

Emergency Responder and Intrado V9-1-1 Enterprise Services Overview

• Cisco Emergency Responder (Emergency Responder) supports Intrado V9-1-1 for Enterprise Service in the Cisco Unified Communications environment as an alternative to direct connection with the Local Exchange Carrier (LEC). The Intrado V9-1-1 for Enterprise Service provides local routing and emergency service response for Intrado customers. Emergency Responder worksin conjunction with Intrado to provide emergency services to phones that are on the corporate network (on-premise) and phones that are located away from the corporate network (off-premise).
• For more information about configuring Emergency Responder, managing Emergency Responder users, working with ERLs, and other related topics, see the “Add Scheduled Intrado Updates” section.
• These topics provide an overview of how Emergency Responder operates with Intrado V9-1-1 for Enterprise Service and how to configure and use Emergency Responder to support Intrado V9-1-1 Enterprise users.

Intrado V9-1-1 for Enterprise Service

• If you are a subscriber to Intrado V9-1-1 for EnterpriseService, you can use Emergency Responder to simplify emergency call management. Emergency Responder provides an interface that allows you to enter and synchronize location information directly to the Intrado database. Emergency Responder provides location information for emergency calls for both on-premise phones and off-premise phones and works with Intrado and Unified CM to complete emergency calls.
• Emergency Responder tracks IP phones by the IP subnet or when someone manually configures and assigns the MAC address. Emergency Responder maintains the status of the phones (on-premise, off-premise, unlocated), and passes on any ALI or ELIN information to Intrado. Users with on-premise phones rely on Cisco Unified Communications to route their emergency calls to Intrado and the designated emergency provider.
• Users with off-premise phones cannot make emergency calls until the users enter in their location and associate this information with their directory number. After the location information has been verified, emergency calls placed from off-premise phones can be completed.
  Note
  Users can only configure one off-premise location for each DID (DN + External Mask). This configuration also applies to shared lines. If two off- premise phones share a DID, the user can only associate one location to the DID.

The following figure shows the interactions between users, Emergency Responder, and Intrado.

Figure 1: Understanding the Interactions Between Users, Emergency Responder, and Intrado

Emergency Call Flow

When a user makes an emergency call:

1. Unified CM routes the call to Emergency Responder.
2. Emergency Responder routes the call to Intrado.
3. Intrado receives the 10-digit ELIN for the calling party and obtains the ALI data for the caller from this calling party number.
4. Intrado completes the call.

Set Up Support for Intrado V9-1-1 for Enterprise Service

After you have confirmed your emergency service support with Intrado, you must configure Emergency Responder to support Intrado V9-1-1 for Enterprise Service.
You must complete the tasks described in the following procedure before creating Intrado ERLs.
Note
You must configure the IPaddress of the DNSserver to resolve the URLs provided by Intrado before completing these tasks.See Cisco Unified Operating System Administration Web Interface For Cisco Emergency Responder.

Procedure

• Step 1 Configure the following items in the Validation and Update Interface (VUI):

  • Upload the certificate provided by Intrado.
  • Validate the certificate.
  • Configure Intrado Account Information.

• Step 2 Configure Route Patterns for routing calls to Intrado on the Emergency Responder server.

• Step 3 Configure Route Patterns and gateway for routing calls to Intrado on Unified CM server.
  See Understanding Route Plans chapter in Cisco Unified Communications Manager System Guide, and the “Gateway Configuration” chapter in the Cisco Unified Communications Manager Administration Guide.

• Step 4 Create Intrado ERL and verify the validity and consistency of the ALI data for the Intrado ERL against the Intrado TN database.

• Step 5 Assign Intrado ERLs to switch ports, IP subnets, and unlocated phones.

Set Up Intrado VUI Settings

Before you can configure Intrado VUI settings, you must have your account information and a certificate from Intrado.

• Note
  To continue emergency service support when there is a failover to the Emergency Responder subscriber, you must upload the certificate file to the Emergency Responder subscriber separately

• Note
  After upgrading the Cisco Emergency Responder, upload the certificate again to continue using the Intrado Service.

Procedure

• Step 1 From Emergency Responder, choose System > Intrado VUI Settings. The Intrado VUI Settings page displays.

• Step 2 Click Upload Certificate. An Upload Certificate window opens.

• Step 3 Use the Browse button to locate the Intrado certificate file, highlight the file, and click the Upload button.

• Step 4 Enter the Certificate Password and the VUI URL in the adjacent text boxes. Click Test and Validate.

• Step 5 Enter the Account Information.

  • VUI Schema URL
  • Intrado Account ID
  • Max VUI Connections

• Step 6 Click Update.
  Note
  To replace the Intrado VUI certificate, you must delete the existing Intrado account and then proceed from Step 1. Else, the Upload Certificate option will be grayed out.
  For more information about the Intrado VUI settings, see Intrado VUI Settings.

• Step 7 Click Test Connectivity to verify whether Emergency Responder can successfully connect to the customer specific account through the Intrado VUI.

Set Up Intrado Patterns on Emergency Responder

Before any emergency calls can be completed by Intrado V9-1-1 for Enterprise Service, you must configure the route patterns for routing the call to Intrado.

Procedure

• Step 1 From Emergency Responder, Choose System >Telephony Settings.
  The Telephony Settings page is displayed.

• Step 2 Under Intrado Route Pattern Settings, enter the Intrado Route/ Translation Pattern and click the Add button

Set Up Intrado ERLs

Before you begin
You must first configure Intrado route patterns before you can add any Intrado ERLs.

Note
Intrado ERLs differ from conventional ERLs in the following ways:

• You can only select route patterns from a preconfigured list in the Telephony Settings web page.
• You can query and validate ALI data from Intrado by using Intrado VUI (Validation & Update interface).
• You must submit ALI data (TN Update) to Intrado by using Intrado VUI before an emergency call can be successfully routed.

Procedure

• Step 1 From Emergency Responder, choose ERL>Intrado ERL > Intrado ERL(Search and List).
  The Find Intrado ERL Data page displays.

• Step 2 Click the Add New ERL button.
  Emergency Responder opens the Add New ERL window. See Find Intrado ERL for a detail explanation of each field.

• Step 3 Fill in the ERL Information.

• Step 4 Click ALI Details
  Emergency Responder opens the ALI Information window.

• Step 5 Enter the ALI Information. The “ALI Information section”, Cisco Emergency Responder Administration Web
  Interface Appendix A, contains detailed explanations of each field. To look up an addressin the Intrado MSAG database, click Query from Intrado.

• Step 6 After entering the ALI Information, click Pre-validate from Intrado.

• Step 7 Make the Add New ERL window the active window if it is not, and click Insert.
  Emergency Responder saves the ERL and its ALI.

Intrado ERL Imports
If you have multiple ERLs, and you want to add them all at once, you can create a file that contains more than one ERL definition, and import all the ERLs at the same time into your Emergency Responder configuration. For more information about importing ERLs, see Import Several ERLs.

Intrado ERL Information Export
Use the Export ERL page to create ERL export files for our own use, for example, to back up or move an ERL configuration. For more information about importing ERLs, see Export ERL Information.

Reconcile ALI Discrepancies

You can use Emergency Responder to compare the records from Intrado VUI with the records in the database and displays ALI records that have discrepancies. You can examine each record and choose to update the local record with information from Intrado or update Intrado’s record.

Procedure

• Step 1 In Emergency Responder Administration, choose ERL > Intrado ERL > View ALI Discrepancies.
  The View Intrado ALI Discrepancies page appears.

• Step 2 Enter search criteria to find any specific ELINS and click Find, or click Find without any search criteria to display all Intrado ALI discrepancies. The search results appear.

• Step 3 Click on the radio button next to the ELIN that you want to view or click View ALI Discrepancies to launch the View Intrado ALI discrepancies for a particular ELIN.
  The View Intrado ALI Discrepancies for a particular ELIN window appears.

• Step 4 Choose the correct data from either the local Emergency Responder database or from Intrado.

• Step 5 Click Save to save changes to the local Emergency Responder database. Click Save Intrado ALI Info to save changes to the Intrado VUI.

• Step 6 Click Close to close this window

ERL Data Migration

Emergency Responder supports migrating existing conventional ERLs to Intrado ERLs and vice versa.

Procedure

• Step 1 Choose ERL > Intrado ERL > Intrado Schedule from Emergency Responder.
  The Intrado Schedule page appears.

• Step 2 Choose the days of the week and the time of day that you want to schedule an update.

• Step 3 Check the Enable Schedule check box if you want to activate this schedule.

• Step 4 Choose either ALI Update Schedule or Secondary Status Update Schedule.

• Step 5 Click Add to add the schedule to the list of schedules.

Update Scheduled Intrado Update

Procedure

• Step 1 From Emergency Responder, choose ERLIntrado ERLIntrado Schedule.
  The Intrado Schedule page appears.

• Step 2 Click the Edit link adjacent to the schedule that you want to update.

• Step 3 Choose the days of the week and the time of day.

• Step 4 Check the Enable Schedule check box to activate this schedule.

• Step 5 Click Update to change the schedule on the list of schedules.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>