LUFTRUM CA Car Air Purifier with H13 True HEPA Filter User Manual

LUFTRUM CA Car Air Purifier with H13 True HEPA Filter

Product Information

Specifications

• Model: Luftrum Car Air Purifier CA
• CADR: m/h
• Three-color fabric soft decoration available
• High-precision dust sensor built-in
• Prompt air quality change and intelligent purification mode
• On-board start-up mode with one-touch control

About Luftrum Car Air Purifier CA

Luftrum car air purifier CA is a high-quality air purifier designed specifically for use in cars. It features a high-precision dust sensor that detects air quality changes and adjusts the purification mode accordingly. With its on-board start-up mode, it can be easily controlled with just one touch. The purifier also comes with a three-color fabric soft decoration, adding a touch of style to your car’s interior.

Important Safety Precautions

• This appliance is not suitable for individuals who are weak in physical strength, sensory ability, intelligence, or lack experience and cognition.
• Children should be supervised and should not operate the appliance without proper guidance.
• In case of power cord damage, immediately disconnect the power cord and replace it with a new one to avoid danger.
• Ensure that the car air purifier is not obstructed and remains unobstructed around.
• Do not clean or spill liquids such as water, detergent, or flammable solvents on the purifier.
• Avoid adjusting the purifier while driving.

Maintenance of Products

To keep your Luftrum car air purifier in good condition, it is recommended to clean it regularly. The purifier adopts a breakthrough design, high-quality materials, and excellent technology.

Installation of the Purifier

Select the installation position according to the model:

1. Rear seat window
2. Back of headrest
3. Central part
4. Instrument panel

You can also install it in other positions, but ensure stability and safety to avoid accidents. Install the purifier in a well-ventilated area for normal operation.

Installation Method of Sucker

Use the sucker to fix the purifier to the surface of the windshield, such as the instrument panel and the rear window (depending on your model). Ensure that the windshield and instrument panel are clean and dust-free before fixing the purifier

Installation Method of Fixing Strap

You can install the air purifier to the back of the headrest with the fixing strap (depending on the model). Make sure the purifier is firmly installed before driving for safety. If installed in the headrest position, ensure that rear passengers have fastened their seat belts.

FAQs

1. Is the Luftrum car air purifier suitable for all car models?
   Yes, the Luftrum car air purifier can be installed in different positions in most car models. However, please ensure stability and safety during installation.

2. How often should I clean the Luftrum car air purifier?
   It is recommended to clean the purifier regularly to maintain its optimal performance. The frequency of cleaning may vary depending on usage and environmental conditions.

3. Can I adjust the purifier settings while driving?
   No, it is not recommended to adjust the purifier settings while driving for safety reasons. Please adjust the settings when the vehicle is stationary.

4. What should I do if the power cord of the purifier is damaged?
   In case of power cord damage, immediately disconnect the power cord and replace it with a new one to avoid any potential danger.

LUFTRUM car air purifier C401A
CADR: 26m3/h; three-color fabric soft decoration is available; high-precision dust sensor is built in, and prompt of air quality change and intelligent purification mode can be available; on-board start-up mode, which can be easily controlled by one-touch mode

OVERVIEW

Important safety information

Warning Failure to follow these safety instructions may result in fire, electric shock, injury, or damage to the purifier or other property. Please read all the safety information below before installing and using the purifier.
This appliance is not suitable for personnel who are weak in physical strength, sensory ability and intelligence (including children), and personnel who lack experience and cognition; otherwise they must operate under the supervision or guidance of the personnel responsible for their safety. Once the power cord is damaged, it is necessary to disconnect the power cord immediately and replace it with a new one to avoid danger.

• Please supervise the behavior of children and ensure that they do not operate this appliance at will.
• Keep the car air purifier unobstructed around, and do not cover.
• Do not adjust the purifier while driving.
• Please use it properly to prevent falling or damage!
• Do not clean or spill the purifier with liquids, such as water, detergent or flammable solvents.

Maintenance of products

Luftrum car air purifier adopts a breakthrough design, high-quality materials and excellent technology. To ensure that your purifier is always in good condition, we recommend that you should clean it regularly.

• Please be sure to cut off the power to this purifier before starting cleaning or maintenance operations. It is recommended to use a vacuum cleaner to clean the air inlet from the inside during the removal and replacement of the filter screen.
• It is recommended to wipe the outside of the machine with a soft and clean wet cloth.
• It is forbidden to clean the machine with gasoline, chemical solvents or corrosive materials, otherwise, these chemicals may damage the surface of the equipment. Foreign matters are prohibited to enter the air inlet and outlet of this machine, otherwise, it may cause electric shock or damage to this machine.
• Do not repair the Luftrum car air purifier or adjust its electrical or mechanical functions.
• You should contact the local distributor or Shenzhen Luftrum Co., Ltd. for warranty information.

Installation of the purifier

Select the installation position:

You can install air purifiers at different positions in the car according to the model, as shown in the figure

1. Rear seat window
2. Back of headrest
3. Central part
4. Instrument panel

Notes

You can install it in other positions, but please make sure that the purifier can operate stably and safely in this position to avoid accidents.
Please be sure to install the purifier in a well-ventilated area to ensure normal operation.

Installation method of sucker

The sucker can fix the purifier to the surface of the windshield, such as the instrument panel and the rear window (depending on your model).
Notes Once the sucker is used, the purifier should be fixed on the setting surface; please make sure that the windshield and instrument panel are clean and dust-free.

• Install the sucker accessories into the groove of the reserved bracket of the purifier
• Push the plane of the purifier close to the installation position forward to make the sucker close to the glass, and turn the bracket to make the sucker fully close to the glass.
• Turn on the fixed switch of a sucker

Removing the sucker

• Turn off the fixed switch of the sucker.
• Lift the exposed part of the soft glue and remove the sucker from the glass.
• Press the hide button as shown in the figure above and pull out the bracket parallel to the bottom of the purifier.

Installation method of fixing strap

You can install the air purifier to the back of the headrest with the fixing strap (depending on the model).
Notes Please make sure that the purifier is firmly installed before driving for your safety; if the purifier is installed in the headrest position, please make sure that the rear passengers have fastened their seat belts for your safety.

• Install the bottom gasket fitting into the reserved port of fixing strap
• Put the gasket with the fixing strap on the reserved position at the bottom of the purifier, and screw on the screw fittings
• Install the purifier on the back of the headrest
• Put on the button, tighten the fixing strap, and finally put on the fixed button

Use of Luftrum purifier

Notes
The output of power supply must be ; the device will run automatically when it is connected to the power supply. If you want to cancel, please press the key for ? seconds and ring once to cancel. If you need to recover, press the key for seconds and ring twice to start the power supply.
With dust sensors, the purifier will enter the AUTO intelligent mode after connecting the power supply. At this time, the purifier will change the f an speed of the purifier in accordance with the air quality in the car, which is more intelligent and convenient.

• Plug the power connector into the purifier, and connect the cigarette lighter connector on the other end of the power cord to the internal power interface of the car, and the purifier will start.
• The wind speed of the purifier will be changed by gently pressing the white switch key (in order: AUTO, level I, level II, level III, shutdown and startup).

Learn about indicators of Luftrum purifier

Meaning of different numbers of rectangular indicators;

• One indicator represents the wind speed of the level I;
• Two indicators represent the wind speed of the level II;
• Three indicators represent the wind speed of the level III;

With built-in dust sensor:

When green “AUTO” is displayed, it indicates that the purifier is running in intelligent mode

with built-in dust sensor

• Displaying green lights indicate that the air quality in the car is fine;
• Displaying orange lights imply that the air quality inside the car is fair;
• Displaying red lights indicate that the air quality in the car is poor.

Replacement of the filter screen

Notes It is time to replace with new one when the filter screen is used for 1000 hours (The “Filter” will prompt) or open for 1 year. Make the filter screen and bottom cover of the purifier model a whole to ensure the filtering effectiveness, provided it doesn’t be separated at random. Reset the car purifiers after replacing the filter screen

• Disconnect the power supply, turn over the purifier, and press the filter screen cover with the arrow direction
• Bouncing the filter screen to take down the bottom cover of the filter screen
• Now, change a new bottom cover of the filter screen and close the bottom cover
• Power on and start the purifier, press the “reset” key next to the power interface for seconds to reset the filter screen record of the equipment.

FAQS

• Question
  The Luftrum car air purifier fails to be started.
  Answer

  • Confirm that it is connected with a power supply of 12V.
  • Check the power line to guarantee the slight plugging of the socket.
  • Press the “ON/OFF” button again.
  • Please contact the retailer if the machine still cannot be started.

• Question
  “Filter” indicator of the Luftrum filter replacement still performs after restarting and changing the filter.
  Answer

  • Do not press the reset hole correctly
  • Repeat the reset step of “replace filter screen”.
  • The purifier is successfully reset when the display panel doesn’t show the “Filter” indicator

• Question
  There is a short pause of the Luftrum purifier fan.
  Answer
  It is a normal for purifier of voltage protection. The voltage value will change sometimes. The fan stops working until the voltage recovers.

  • Press the power button to reset.

• Question
  There is no change with the color of the air indicator of the Luftrum purifier for a long time.
  Answer
  To ensure that your air indicator of the model can change, check the machine type is whether equipped with a dust sensor or not. If yes, it may mean the air quality is stable. Or the air vent is blocked or polluted.

  • Make sure that the air around the purifier is smooth.
  • Restart the purifier to inspect the problems. The problem still exists:
  • Disconnect the purifier and clean it according to the direction on page.
  • Depress the power button to enable the purifier. Contact the retailer if the purifier remains unchanged.

• Question
  The air indicator of the Luftrum purifier remains changing for types equipped with dust sensors.
  Answer
  It is normal for normal purifier operation. The purifier can gradually purify while the air quality is poor. However, with the uneven distribution of the dust in the air, the healthy air indicator will frequently change under the performance of it with air quality around the purifier.
  It also means that the purifier works normally. Waiting patiently for completing its purification to see the green light of the indicator.

• Question
  With the air indicator of Luftrum purifier remaining green in case of models equipped with built-in dust sensors, the peculiar smells still exist in the car.
  Answer
  Only the dust in the air can be indicated by Luftrum purifier air indicator, except for chemical contamination. Even so, Luftrum purifier can still get rid of chemical pollutants during operating.
  The purifier can fast improve the air quality by completing its purification function.

• Question
  Peculiar smell still left in my new car with Luftrum car air purifier running for a long time.
  Answer
  It can be attributed to many factors of that problem. Luftrum purifier remains to purify the air in the car. While new contaminants generates inside new cars continuously. Luftrum car air purifier can notably reduce air contaminants. Start up the level II wind speed of Luftrum car air purifier to accelerate the air purification process.

• Question
  Luftrum car air purifier is able to operate automatically during running.
  Answer
  Luftrum car air purifier is set to turn on automatically when connecting the power supply, press the ON button for seconds under the power-on state to close the setting, it is successfully changed when the purifier rings twice. Similarly, in the power-on state, press the ON button for seconds if the power supply needs to be connected, say, start the function. A short sound giving out from the purifier, revise is made again.

• Question
  The service time of C401A filter screen of the Luftrum car air purifier.
  Answer
  C401A filter screen of Luftrum car air purifier, compositing of new materials, has an excellent capability of filtration and purification. We suggest replacing the filter screen under the following cases:

  • After cumulatively using the filter screen for 1000 hours, a “Filter” prompt for replacement of the purifier will glitter.
  • And 1 year after opening the filter screen

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>