PHOEBUS LINK LX-90T Car Intelligent Conversion Box User Manual
- June 9, 2024
- PHOEBUS LINK
Table of Contents
PHOEBUS LINK LX-90T Car Intelligent Conversion Box
Product introduction
Phoebus Link car intelligent conversion box, mainly used for realizing the
interconnection of mobile phone and car.
The conversion function integrates the mobile phone and the car screen, which
will convert the diversified Mobile phones to car entertainment, providing
users with music & abundant driving pleasure; reducing the frequency of using
the mobile phone, providing users with a safer driving Car experience.
Products Host & Accessories
Product Instructions
-
Connect the box to the original car USB Data interface; Press the’ APP’ button or Enter to the Carp lay page; Read box data and wait for a connection
-
Turn on the Bluetooth of the iPhone, search for the Bluetooth Device naming: “smart Box-****”. Pair it and allow the Sync, finally click “Use Carp lay
-
After the connection, please wait for a few seconds and Carp lay interface will be shown；
Frequently Asked Questions
-
How to update the product？
The wireless Car Play adapter needs to be removed to a USB power adapter; join the WIFI devices naming ‘smart Box-xxxx’ on your iPhone with password: 88888888; Enter the IP Address 192.168.1.101 in your Safari Browser, and press ‘ click me to upgrade’; wait for a few minutes for upgrade.
Note: Please forget the ‘smart Box-xxxx’ Networks after upgrading successfully.
-
Does the Car Play adapter fit my iPhone 11
? Yes, the wireless Car Play Adapter works every iPhone from the 6s(iOS 12.1) all the way up to the 13 Pro max(iOS 15 software version). -
Do I have to sync the wireless Car Play adapter every time when starting my car?
Don’t worry, After the first adaptation, the wireless Car Play adapter will automatically match the Bluetooth and WiFi of your iPhone every time. -
How to upload the log data when the adapter doesn’t work for my car unit?
Please enter the IP address Page & fill in the car info in the Problem Description sheet, and press ‘Submit’ to upload your log data.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
IC STATEMENT
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
To maintain compliance with RSS-102 RF Exposure guidelines, This equipment
should be installed and operated with minimum 20cm distance between the
radiator and your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>