innovative 18690 STAXX Dual Articulating Monitor Mount Instruction Manual
- June 4, 2024
- INNOVATIVE
Table of Contents
innovative 18690 STAXX Dual Articulating Monitor Mount
PARTS LIST
DESK CLAMP CONFIGURATION
If the monitor arm or pole does not easily fit into the mount, remove the
bushing from the mount and place it on the monitor arm or pole and press
firmly back into the mount.
IMPORTANT:
When inserting the pole into the mount, the dimples should be aligned
perpendicular to the rear edge of the mounting surface.
IMPORTANT:
Install part (G) in the orientation as shown to the left. When washer, part
(G), is installed correctly, the arms will not rotate past the back of the
mount.
Optional Adjustment
- In some instances, an additional counterbalance adjustment may be needed to allow the arm’s instant height adjustment function to work properly.
- If your arm is not staying in position after performing step 12, tighten the adjustment screw with a 1/8″ Allen wrench.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>