V-TAC VT-6028 LED Waterproof Lamp Instruction Manual

V-TAC VT-6028 LED Waterproof Lamp

TECHNICAL DATA

Model| Power| Lumens| BeamAngle| CRI| PF| IP Ratng

(Fitng)

| IP Ratng

(Tube)

| Dimension| Input Power| Clip

Numbers

---|---|---|---|---|---|---|---|---|---|---
VT-6028| 1x10W| 850| 120°| >80| >0.5| IP65| IP20| 666x68x58mm| AC:200-240V,50/60Hz| 6
VT-6029| 2x10W| 1700| 120°| >80| >0.5| IP65| IP20| 666x96x58mm| AC:200-240V,50/60Hz| 6
VT-12028| 1x18W| 1700| 120°| >80| >0.5| IP65| IP20| 1276x68x58mm| AC:200-240V,50/60Hz| 10
VT-12023| 2x18W| 3400| 120°| >80| >0.5| IP65| IP20| 1276x96x58mm| AC:200-240V,50/60Hz| 10
VT-15028| 1x22W| 2000| 120°| >80| >0.5| IP65| IP20| 1576x68x58mm| AC:200-240V,50/60Hz| 12
VT-15022| 2x22W| 4000| 120°| >80| >0.5| IP65| IP20| 1576x96x58mm| AC:200-240V,50/60Hz| 12

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instruc-tions carefully before starting the installing and keep this manual handy for future reference. If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at their best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of the product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.

WARNING!

1. Please make sure to turn off the power before starting the installation.
2. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
3. Installation must be performed by a qualified electrician.

This marking indicates that this product should not be disposed of with other household wastes.
Caution, risk of electric shock.

PRODUCT FEATURES

• Higher light transmittance diffuser made of trans-parent PC.
• Housing body type: Opaque ABS + PC.
• Silicone gel gasket and ABS clips for good mechanical performance or stainless steel clips ensuring IP65 of the lighting fixture.
• Key electrical components all installed on the movable reflector, easy, maintenance.
• Use rubber cable 3x1mm or 3×1.5mm for outdoor mounting.
• PG11 waterproof cable gland available wiring input on one side of the housing.

LAMP REPLACEMENT INSTRUCTION

• Unlock the clips and open the diffuser to replace or install the tubes.

MOUNTING BRACKETS INSTALLATION

INSTALLATION DIAGRAM:

STEP 1: Slip open the clips

STEP 2: Open the diffuser

STEP 3: Install or replace the tubes.

STEP 4: Close the diffuser & ensure the fitting is locked properly using the clips.

NOTICE:

• Starter not required
• Direct Installation
• Tubes included

SAFETY INSTRUCTIONS

• Turn OFF the electricity before starting the installation.
• Installation only by a certified electrician.
• Do not use electronic ballast.
• Do not use DC electricity.

In case of any query/issue with the product, please reach out to us at: support@v-tac.eu For More products range, inquiry please contact our distributor or nearest dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B

References

• tac.eu

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>