MAEN Manhattan37 Watch User Manual
- June 9, 2024
- MAEN
Table of Contents
MAEN Manhattan37 Watch
Wearing the watch for the first time
Before being worn for the first time, or if it has stopped, a MAEN watch must be wound manually in order to function correctly and precisely. To wind the watch manually turn it several times clockwise. (Turning in the other direction has no effect.) A minimum of 25 turns is required for adequate partial winding. The watch will then be wound automatically as long as it is worn on the wrist.
The Manhattan 37
The Manhattan 37 is a modern re-interpretation of landmark timepieces from the 1970’s. It was important to us to give the Manhattan 37 its own identity and we believe that we have succeeded with that. With its steel case, vertically elongated octagonal bezel, Côtes de Genève dial and integrated bracelet, the Manhattan 37 packs a lot of punch. Due to the integrated design the watch wears larger than its modest 37 mm would suggest. The combination of polished and satin-brushed finishes highlight the unique shape of the case and bracelet.
Certified Swiss Made
- The Manhattan 37 is assembled in La Chaux-de-Fonds, Switzerland. Waterproof testing, entrance inspection and final quality control is also performed in Switzerland.
- The Swiss Made label is a representation of the ultimate sign of quality – the perfect combination of function and design.
Manhattan 37 Overview
- HOUR HAND
- MINUTE HAND
- SECONDS HAND
- DATE WINDOW
- WINDING CROWN
Setting your Manhattan 37
MANUAL WINDING (POSITION 0)
- To wind the watch manually, turn the crown clockwise; turning in the other direction has no effect.
- When setting the watch for the first time or after the watch has stopped, complete a minimum of 25 turns for partial winding.
Setting the time & date
SETTING THE DATE (POSITION 1)
the crown is pulled out to the first notch. To set the date, turn the crown
counter clockwise.
SETTING THE TIME (POSITION 2)
the crown is pulled out to the second notch. The seconds hand is stopped,
allowing you to set the time to the precise second. To set the hour and
minute, turn the crown in either direction. To avoid confusion between a.m.
and p.m. hours, move the hour hand to 12 o’clock. If the date changes, it is
midnight.
Warranty term
Two year from the date of purchase. This warranty covers manufacturing defects on the watch itself (movement, case, crystal). Other parts than the above are not covered by this warranty. To have replacement covered under this warranty performed, please use our contact form on the “contact us” page. In the e-mail you need to specify your name, address, order number and a detailed description of the issue at hand. Finally, write ‘reclaim of purchase’ as subject of the e-mail and mail. Note that repair/replacements will be charged in the following cases, even during the warranty term.
- Failure or damage caused by improper use or carelessness (knocks, dents, crushing, broken crystal, etc.)
- Failure or damage caused by unjustifiable repair or modification
- Failure or damage caused by fire or water, or a natural disaster such as for example an earthquake
- Esthetic changes that occur during normal wear and tear and aging (minor scratches, etc.; on the case and/ or cystal, alteration of the colour on the wristband and the peeling of the plating)
- In case the retail store and the purchase date are not indicated on the warranty, or if this information has been rewritten
The case, dial, hands, crystal, watchband or other parts thereof may be replaced with substitutes if the originals are not available. This warranty warrants that you can receive free replacement in accordance with the terms set forth herein and within the specified term, and shall not restrict any lawful right of the Customer. Any damage caused due to the modification of the watch is not covered by our warranty. Only if the modification is arranged and executed directly via our service center the original warranty will be maintained.