PHILIPS BDP100 LED30 TownGuide Performer User Manual
- June 9, 2024
- Philips
Table of Contents
Lighting
TownGuide Performer
BDP100 LED30/740 DN PCC SI CLO-LS-6 76P
TOWNGUIDE PERF FLAT CONE – LED module 3000 lm Distribution narrow –
Polycarbonate bowl/cover clear – Posttop for diameter 76 mm
The TownGuide Performer family consists of six recognizable yet modern shapes:
Flat Cone, Bowl, Classic Cone, Classic, T and Tzero. All are available with a
clear bowl. Except for Tzero, also a frosted bowl can be chosen. With an
extensive range of lumen packages and a choice of light colors and operating
lifetimes, it is easy to select the version that best suits your project’s
specific requirements. In addition, TownGuide Performer has a variety of
control system options that can make it an integral part of your smart energy-
reduction programs – from stand-alone LumiStep and DynaDimmer, SDU switch-dim
control, through to seamless remote connectivity with CityTouch lighting
management software. Installation is easy. Thanks to the bayonet whistle
connector with integrated gland located in the spigot, the luminaire does not
have to be opened at all for installation. Philips has made every effort to
make the Total Cost of Ownership (TCO) of the luminaire as attractive as
possible. And as TownGuide Performer is a dedicated LED luminaire, compatible
with a variety of control systems, the energy and maintenance cost savings
compared to conventional lighting are significant.
Product data
General information
Number of light sources| 4 [ 4 pcs]
Lamp family code| LED30 [ LED module 3000 lm]
Light source color| 740 neutral white
Light source replaceable| Yes
Number of gear units| 1 unit
Driver/power unit/transformer| PSDD-CLO [ Power supply unit with DynaDimmer
and constant light output
(integrated)]
Driver included| Yes
Optical cover/lens type| PCC [ Polycarbonate bowl/cover clear]
Luminaire light beam spread| 32° x 29°
TownGuide Performer
Embedded control| CLO-LS-6 [ Constant light output and
LumiStep dimming 6 hours]
---|---
Control interface| –
Light regulation| Dimming via DynaDimmer integrated in
ballast or driver
Connection| Screw connection block 5-pole
Cable| –
Protection class IEC| Safety class I (I)
Parts color| All parts colored
Coating| –
Glow-wire test| 650/5 [ Temperature 650 °C, duration 5 s]
Flammability mark| NO [ -]
Safety device| PCBC [ PCB cover]
CE mark| CE mark
ENEC mark| ENEC mark
Warranty period| 5 years
Optic type outdoor| Distribution narrow
Photocell| No [ -]
Constant light output| Yes
Number of products on MCB of 16 A type| 20
EU RoHS compliant| Yes
WEEE mark| –
Light source engine type| LED
Service tag| Yes
Serviceability class| Class A, luminaire is equipped with
serviceable parts (when applicable): LED
board, driver, control units, surge protection device, optics, front cover and
mechanical parts
Product family code| BDP100 [ TOWNGUIDE PERF FLAT CONE]
Light technical
Upward light output ratio| 3
Standard tilt angle posttop| 0°
Standard tilt angle side entry| –
Operating and electrical
Input Voltage| 220-240 V
Input Frequency| 50 to 60 Hz
Initial CLO power consumption| 19.2 W
Average CLO power consumption| 19.4 W
End CLO power consumption| 19.6 W
Inrush current| 22 A
Inrush time| 0.29 ms
Power Factor (Min)| 0.95
Power Factor (Nom)| 0.93
Controls and dimming
Dimmable| Yes
Mechanical and housing
Housing Material| Aluminum
Reflector material| –
Optic material| Acrylate
Optical cover/lens material| Polycarbonate
Fixation material| Steel
Mounting device| 76P [ Post-top for diameter 76 mm]
Optical cover/lens shape| Conical flat
Optical cover/lens finish| Clear
Torque| 15
Overall height| 209 mm
Overall diameter| 570 mm
Effective projected area| 0.051 m²
Color| Silver
Dimensions (Height x Width x Depth)| 209 x NaN x NaN mm
Approval and application
Ingress protection code| IP66 [ Dust penetration-protected, jet-proof]
Mech. impact protection code| IK10 [ 20 J vandal-resistant]
Surge Protection (Common/Differential)| Luminaire surge protection level until
6 kV
differential mode and 6 kV common mode
Sustainability rating| –
Initial performance (IEC compliant)
Initial luminous flux (system flux)| 2291 lm
Luminous flux tolerance| +/-7%
Initial LED luminaire efficacy| 119 lm/W
Init. Corr. Color Temperature| 4000 K
Init. Color Rendering Index| 70
Initial chromaticity| (0.38, 0.38) SDCM <5
Initial input power| 19.6 W
Power consumption tolerance| +/-10%
Init. Color Rendering Index Tolerance| +/-2
Over time performance (IEC compliant)
Driver failure rate at 5000 h| 0.50%
Control gear failure rate at median useful
life 100000 h| 10%
Lumen maintenance at median useful
life* 100000 h| 97
Application conditions
Ambient temperature range| -40 to +35 °C
Performance ambient temperature Tq| 25 °C
Maximum dim level| 50%
Product data
Full product code| 8.72E+14
Order product name| BDP100 LED30/740 DN PCC SI CLO-LS-6 76P
EAN/UPC – Product| 8.72E+12
Order code| 90608700
TownGuide Performer
| Numerator – Quantity Per Pack | 1 |
|---|---|
| Numerator – Packs per outer box | 1 |
| Material Nr. (12NC) | 9.11E+11 |
| Net Weight (Piece) | 6.200 kg |
Dimensional drawing
BDP100 LED30/740 DN PCC SI CLO-LS-6 76P
© 2022 Signify Holding All rights reserved. Signify does not give any
representation or warranty as to the accuracy or completeness of the
information included herein and shall not be liable for any action in reliance
thereon. The information presented in this document is not intended as any
commercial offer and does not form part of any quotation or contract, unless
otherwise agreed by Signify. Philips and the Philips Shield Emblem are
registered trademarks of Koninklijke Philips N.V.
www.lighting.philips.com
2022, November 8 – data subject to change
Datasheet, 2022, November 8
data subject to change