FITINDEX FF-01 Smart Body Tape Measure User Manual

June 9, 2024
FITINDEX

FITINDEX FF-01 Smart Body Tape Measure

FITINDEX-FF-01-Smart-Body-Tape-Measure-PRO

INTRODUCTION

Thank you for choosing the FITINDEX Smart Body Tape Measure! This Bluetooth body tape measure is your personal health assistant that can help easily measure various body parts and keep track to improve your health and fitness. Hope that you enjoy using FITINDEX Smart Body Tape Measure!

IMPORTANT SAFETY INSTRUCTIONS

  1. DO NOT use this device for any purpose other than that described in this manual.
  2. Children under 10 must be supervised by an adult when using the device.
  3. DO NOT disassemble or modify the device. There are no user-serviceable parts inside.
  4. DO NOT subject the device to extreme temperatures beyond operating temperatures (104°F/40°C), high vibrations, dusty areas, humid conditions (including any liquid) or direct sunlight.
  5. DO NOT apply excessive force to the tape or the gear as this may cause permanent damage to the device.
  6. DO NOT fold or twist the tape as this may cause permanent damage to the tape.
  7. DO NOT use excessive force to pull the tape beyond its maximum length (6Oin/150cm).
  8. DO NOT allow the tape to retract too fast as minor injury may occur.
  9. Be very careful when measuring neck circumference. The tape may accidentally cause choking.

FITINDEX-FF-01-Smart-Body-Tape-Measure- \(1\)

ABOUT THE PRODUCT

What’s in the Box

  • 1x Smart Tape
  • 1x Button Cell (CR2032)
  • 1x User Manual

Specifications

  • Product Name: Smart Tape
  • Model: FF-01
  • Unit: in/cm
  • Max. Tape Length: 60in/150cm
  • Resolution: 0.04in/0.1cm
  • Accuracy: 0.12in/+3mm
  • Size: 2.6×2.6×1.1in/6.6 x 6.6×2.8cm
  • Working Humidity: s85%
  • Working Temperature: 32-104°F/0-40°C
  • Power Supply: Button Cell CR2032 DC 3V

Product Overview

Smart Tape

FITINDEX-FF-01-Smart-Body-Tape-Measure- \(2\)

LCD Display

FITINDEX-FF-01-Smart-Body-Tape-Measure- \(3\)

BEFORE USING

Install the Battery

  1. Remove the battery cover.
  2. Insert the provided button cell and ensure the positive pole is facing up. Connect the battery cover by aiming at the Snap-Fit Joint and press until you hear a “click.

Download the FITINDEX App

  • Scan the QR code below or search “FITINDEX” in the Apple App
  • Store/Google Play to download the FITINDEX App.FITINDEX-FF-01-Smart-Body-Tape-Measure- \(6\)

Note: Due to continuous updates and imprOvements, the FITINDEX App may appear slightly different.

USING THE PRODUCT

Connect the Tape with the App

  1. Enable Bluetooth on your smartphone, open the FITINDEX App and chooseCircumference.FITINDEX-FF-01-Smart-Body-Tape-Measure- \(7\)
  2. Press to turn on the smart tape. When the Bluetooth icon on the smart tape display turns solid, it indicates a successful Bluetooth connection.

Note: You can also press and pull out the tape to turn on the smart tape.

Measure

FITINDEX-FF-01-Smart-Body-Tape-Measure- \(10\)

  1. Press to turn on the smart tape.
  2. Press and hold to choose the unit (in/cm) you prefer.
  3. Once Bluetooth is connected, tape the body part name on the App.
  4. Press pull out the tape and wrap it around your target body part.
  5. Insert the locking pin into the receptacle untila “click” is heard.
  6. Press to tighten the tape and press to get your measurement on the tape display or App.
  7. Tap on the App to confirm the measurement and tap “Save'”.

Note:

  1. If the smart tape is turned on and left idle, it will shut off automatically after 20s.
  2. To zero the measurement, press both and .
  3. Memory function: The smart tape recalls the last set unit once turned on.

TROUBLESHOOTING

FITINDEX-FF-01-Smart-Body-Tape-Measure- \(14\)

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible or compliance could void the users authority to operate the equipment,
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

RE Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISED Regulatory compliance
This device contains licence-exempt transmitters that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

WARRANTY (1-YEAR-PERIOD)

The manufacturer’s warranty is void under the following circumstances but not limited to:

  • Improper or inadequate maintenance or modification.
  • Accident, misuse, abuse, contamination, or other external causes.
  • The use of unspecified adapter and accessories.
  • Loss or damage in transit.
  • Damages that occur as a result of one’s failure to follow the instructions.
  • This warranty does not apply to expendable or consumable parts and does not extend to any product from which the serial number has been removed.

CUSTOMER SERVICE
We have an award-winning warranty, exchange, and customer service team that guarantees hassle-free solutions to any issue you might have within business hours.

Tel: +1(714)602-6510
Mon-Fri 9:00AM-4:30PM
Email: support@fit-index.com

US Importer: PANATRADE LLC
14129 THE MERGE ST., BUILDING 3, UNIT A, EASTVALE, CA 92880
Manufacturer: Shenzhen Ruiyi Business Technology Co., Ltd. Qianhai Complex A201, Qianwan Road 1, Qianhai Shenzhen-Hong Kong Cooperation Zone, Shenzhen, 518000 P.R.China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals