Govee H6054 DreamView P1 Light Bars User Manual

June 9, 2024
Govee

Govee H6054 DreamView P1 Light Bars

Safety Instructions

Read and follow the safety instructions below:

  • The light bars are not waterproof. Avoid exposing them to splashes or drops of water.
  • The working temperature should be between -10′ to 45″C (14° to 113’F).
  • The internal light source of the light bars cannot be replaced. If damaged, the light bars must be replaced
  • Do not let children install the light bars
  • Avoid installing the light bars near heat sources
  • External dimmers cannot be used with the light
  • Avoid installing the light bars near potentially dangerous sources (e.g., candles, liquid-filled objects).

Introduction

Thank you for choosing the Govee Dream View Pl Light Bars. The camera technology cancaplure colors onscreen automatically. And then apply them lo your light bars. This lighling effect syncs perfectly with your movies and gaming worlds bringing you an immersive experience. Govee Dream View Pl Light Bars also supports voice control,allow1ng you to light up your life hands- free.

What You Get

Light Bar 2
Control Box 1
Camera 1
Adapter 1
Table Mounting Bracket 2
Screen Mounting Bracket 2
Foam Sticker 7
User Manual 1
Service Card 1

At a Glance

Govee-H6054-DreamView-P1-Light-Bars-01

On/Off Button Press to turn On/Off.
Color Button Press to adjust the color.
Music/Dimmer Button Press t o enter Mus i c

mode.
Long press to adjust the brightness.
Indicator Light|

  • A red light indicates the device is not connected to the network.
  • A blue light indicates the device has successfully connected to the network.
  • No light indicates the device is not powered on or might be broken.

Govee-H6054-DreamView-P1-Light-Bars-02

Govee-H6054-DreamView-P1-Light-Bars-03

Indicator Light
  • A blue light indicates the camera is powered
  • A dim light indicates the camera Is not powered on or might be broken.

Installing Your Device
Place the light bars on both sides of the table or mount them to the TV screen with the mounting bracket

Govee-H6054-DreamView-P1-Light-Bars-04

Govee-H6054-DreamView-P1-Light-Bars-05Position the camera in the center either above or below the screen.

Govee-H6054-DreamView-P1-Light-Bars-06

  • Insert the light bar and the camera cable into the corresponding control box sockets.
  • Power on the adapter, and then connect it to the control box.
  • Installation completed!

Govee-H6054-DreamView-P1-Light-Bars-07Pairing Your Device with the Govee Home App

What You Need:

  • A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n ba 5GHz is not supported.
  • A smartphone or tablet running iOS (or above) or Android (or above).
  1. Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).
  2. Open the app, tap the”+” icon in the top right corner and search for “H6054”.
  3. Tap the device icon and follow the onscreen instructions to complete pairing.
Calibrating the Camera with the Govee Home App
  1. Ensure the camera is positioned in the top-center or bottom-center of the screen.Govee-H6054-DreamView-P1-Light-Bars-08
  2. Stick the provided foam stickers to the 7 position points on the screenGovee-H6054-DreamView-P1-Light-Bars-09
  3. Open the Govee Home app, go to the Settings page, then tap “Calibration”. Begin calibration by following the app instructions.

What You Need:

  1. Drag the calibration points to the position point.

Govee-H6054-DreamView-P1-Light-Bars-10Ο Camera  ■ Position Points

The picture may be distorted under the fish eye camera. Ensure the calibration point is chosen correctly, and the calibration lines do not overlap or cross each other.

Govee-H6054-DreamView-P1-Light-Bars-11

Specifications

Working Voltage AC 100-240V
Input 12VDC 1.SA
Lumen 400Im
Color RGBICWW
Color Temperature 2200-5500K
Camera Pixel 1080p
Working Temperature -10° to 45°C (14° LO 113°F)

Troubleshooting

  1. Cannot connect to WI-FI.
    • Check if the camera is powered on. A blue indicator light means it is powered on.
    • Do not skip 1he Wi-Fi connection steps during the device pairing process.
    • Ensure your Wi-Fi router is 2.4GHz (5GHz is not supported).
    • Ensure you entered the correct Wi-Fi password during the Wi-Fi set up process.
    • Use another smartphone to pair with 1he device to check If your network works. shorten the distance between the device and 1he WI-Fl router to less than 50ft, then reconnect.
    • Video mode, the light color is not consistent with 1he colors onscreen.
    • Ensure there are no strong. external lights affecting the camera.
    • Ensure the camera is installed at the top<enter or bottom<enter of the screen.
    • Calibrate the camera again by following the instructions provided previously.
    • Calibration failed.
    • Check the stability of 1he WI-FI connection. A stable WI-FI connection Is required for successful calibration.
    • Follow the app Instructions to calibrate.
    • Cannot pair or connect with Alexa or Google Assistant.
    • Ensure the Wi-Fi connection is stable and working properly.
    • Go to the app Settings page and follow the Instructions under “User Guide” to pair the device again.
    • The synchronization effect for Music mode does not work properly.
    • Ensure the control box is close to 1he music source, which will help the mic pick up sounds better.
  2. The 3M adhesive tape behind the camera or screen mounting bracket is not sticking.
    • Wipe 1he surface of the wall to ensure it is dry and clean.
    • After attaching the camera or mounting bracket, firmly press down several times to ensure It sticks completely.
    • Can multiple users control one device?
    • Each device can only be controlled by one account.
    • If multiple users want to control the same device, ensure that they are all using the same account.

Customer Service
Warranty: 12-Month Limited Warranty
Support: Lifetime Technical Support
Email: support@govee.com
Official Website: www.govee.com

YouTube: @Gavee
Instagram: @govee__official o
TikTok: @gavee.olllclal
Twitter: Gaveeofficial
Facebook: @Gavee.smarthome

FCC and ISED Canada Statement

This device complies with Part 15 of the rec Rules and Industry Canada license-exempt RSS standard(s). Operation Is subject to the fol1owing two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

NOTE: This equipment has been tested and found to comply with the limits tor a Class 8 digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used In accordance with the instructions, may cause harmful Interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. In this equipment does cause harmful interference lo radio a, television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  1. Reorient or relocate the receiving antenna.
  2. Increase the separation the equipment and receiver.
  3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  4. Consult the dealer or an experienced radio/TV technician for help.
FCC and IC Radiation Exposure Statement

**** This equipment complies with FCC and IC radiation exposure l1m1ts set forth for an uncontrolled environment This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

This device uses a non-replaceable light source. When the light source reaches the end of its life cycle, this device should be replaced.

Not intended for illumination. Only used for creating ambiance.

  1. Do not connect the rope light to the supply while it is In the packing or wound onto a reel;
  2. Do not use the rope light when covered or recessed into a surface;
  3. Do not open or cut the rope light:

Responsible party:

Name: GOVEE MOMENTS(US) TRADING LIMITED

Address: 13013 WLSTERN AVE STE 5 BLUEISLAND IL 60406-2448

Email: support@govee.com

Contact Information: https://www.govee.com/support

FOR IN DOOR USE ONLY

CAUTION: RISK OF EXPLOSIO If BANRY IS REPLACED BY A INCORRECT TYPE. DISPOSE Of USED BA.TTERIES ACCORDII\G TO THE NSTRUCTIONS.

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Shenzhen intellirocks rocks Tech. Co., Ltd is under license.

Govee is a trademark of Shenzhen lntellirocks Tech Co., Ltd.

Copyright <02021 Shenzhen lntellirocks Tech Co. ,Ltd. All Rights Reserved.

Govee Home App

For FAQs and more information, please visit: www . govee.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals